(0)
£0.00

Dynavector Systems Te-Kaitora Rua Moving Coil Cartridge

  code:DSTKR
£2,695.00 (FREE UK Delivery)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Moving upscale with very pleasing results.

Dynavector Te-Kaitora Rua low output moving coil cartridge

The original Te Kaitora cartridge was the result of collaboration between Dynavector Japan and Dynavector New Zealand. The Te Kaitora allowed analogue enthusiasts to embark on a voyage of discovery to the outer limits of vinyl reproduction. 

The improved Te Kaitora Rua continues the journey by incorporating many of the newest features of its Dynavector stable-mates, the XV-1s and XX-2. The Te Kaitora Rua has even managed to improve on the original's silk-like treble and openness.

Note: Te Kaitora means "The Discoverer" in the language of the NZ Maori people, Rua, is "the second version".

Improvements include: 

1. The wire for the coil has been changed to the PCOCC copper wire from the silver wire. It sounds a much smoother and has a much better musical performance.

2. A titanium headpiece for maximum ridgity along with a miniature stainless steel bolt coupling the front and rear yokes to the magnetic circuit assembly. 

3. A 6mm long boron cantilever with the Pathfinder (PF) line contact stylus as used with both Dynavector XV-1s and XX-2. 

4. The ingenious square shaped armature and matching square shaped aperture in the front yoke providing much improved linearity in the magnetic flux distribution. 

5. Alnico magnets are used for high magnetic flux density.

Specification:
Type - Low output moving coil cartridge with flux damper and alnico magnet 

  • Output Voltage 0.26mV (at 1KHz, 5cm/sec.) 
  • Channel Separation 30 dB (at 1KHz) 
  • Channel balance 1.0 dB (at 1KHz) 
  • Frequency response 20 - 20,000Hz (± 1dB) 
  • Compliance 10 x 10-6 cm/dyn 
  • Tracking force 1.8 - 2.2 grams 
  • DC resistance R=5 ohms 
  • Recommended load
  • impedance >30 ohms 
  • Cantilever 6mm length solid boron 
  • Stylus PF Line contact shape, stylus radius: 7 x 30 micron 
  • Weight 9.8 grams

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Turntableworld or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

Be the first to review Dynavector Systems Te-Kaitora Rua Moving Coil Cartridge. Write a review ›