(0)
£0.00

Pro-Ject (Project) Record Box E Phonostage

  code:PROJRECBOXE
From £75.00 (FREE UK Delivery)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

The Record Box E is a high quality pre-amplifier with build in USB to let you record your vinyl to your computer in high definition. This introductory level phono stage is designed specifically to amplify your moving magnet or moving coil cartridge output to line level. The form factor of the unit is small and subtle, so it can be placed near the turntable/amp without being intrusive.

Key Features:
  • Amplification and RIAA equalisation for MM & MC
  • Design principle inspired by Dr. Sykora
  • Digitalisation of vinyl for recording direct to USB with suitable recording programs
  • Automatic recognition, no additional drivers needed
  • Runs on Windows® and Mac OS® operating systems
  • SMD circuitry with special low noise components
  • Internal metal shielding
  • Small size allows installation close to record player
  • Gold plated RCA connection sockets
  • Outboard power supply included
  • Black or White casing
Technical Data:
  • Input Impedance/Capacitance: MC: 100ohms/120pF (low output MC) / MM: 47kohms/120pF (MM or high output MC)
  • Gain MM/MC: 40dB / 60dB
  • Output Voltage Typically: 300mV/1kHz at 3mV/1kHz (MM)  0.3mV/1kHz (MC)
  • Max Output: 9.5V (1kHz) 
  • Noise Floor MM/MC: 94dB (A Weighted) / 75dB (A Weighted)
  • THD MM/MC: <0.01% / <0.05%
  • RIAA Equalisation Curve Accuracy: 20Hz - 20kHz / max. 0.5dB
  • A/D Converter: Burr Brown PCM2904 16-Bit Delta Sigma 
  • Sampling Rates: 32, 44.1 and 48kHz 
  • USB Output: 5 Pin Mini B Connector
  • USB Signal: Digital Serial Data Protocol USB 1.1 
  • Operating Systems: Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS 
  • Input/Line Out: 1 Pair RCA/Cinch Sockets Each 
  • Power Consumption: 18V/500mA DC
  • Outboard Power Supply: 100mA DC
  • Dimensions (W x H x D)(w/Plugs): 120 x 32 x 100(115)mm 
  • Weight: 250g (Without Power Supply)
Please note: You will need interconnect cables to connect this phono stage to your amplifier.

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Turntableworld or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

Be the first to review Pro-Ject (Project) Record Box E Phonostage. Write a review ›