(0)
£0.00

Thorens TP-92 Tonearm

  code:THORENSTP92
From £579.00 (FREE UK Delivery)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

The TP 92 is a nine-inch cardanic design that follows the Loefgren geometry. It was developed in parallel with the TD 309 turntable, which allowed our designers to achieve optimal compatibility. The horizontal bearing is a high-precision Japanese ball bearing that uses a specially developed oil. It is located underneath the tonearm tube at the same level as the stylus for enhanced stability. The counterweight, decoupled by two rubber rings, is also exactly level with the stylus.

The tonearm tube is manufactured from high-quality cold-forged aluminium. A laser vibrometer was used to analyse the tube’s resonances, enabling our designers to target specific frequencies.

The headshell is also made from aluminium and tightly coupled to the tube for increased stability. Overhang can be adjusted either by sliding the headshell into the desired position on the tube or by adjusting the entire tube in the bearing block. The tube can also be rotated on its axis in order to adjust azimuth. The shape of the headshell ensures that the pick-up cartridge’s centre of gravity is always directly underneath the tonearm tube, thus preventing torsional vibrations.

VTA can be easily adjusted by loosening the arm collar lock nut and raising or lowering the entire tonearm. The anti-skating force is provided by two ferrite magnets and can be increased or decreased with the help of an adjustment screw.

The TP 92 OEM version is available with lose tonearm cables or mini DIN 5-pin Plug.

Technical Specifications:

  • Tonearm Specification: 9"
  • Distance Tonearm Pivot To Stylus: 215mm
  • Effective Length: 232.8mm
  • Stylus Overhang: 17.8mm
  • Angular Offset: 23.66°
  • Inner Null: 66.0mm
  • Outer Null: 120.9mm
  • Effective Mass: 11g
  • Maximum Distortion Between Null-Points: 0.63%
  • Geometry: Baerwald / Löfgren A
  • Weight: 144g
  • Connectors: Loose cable or Mini DIN (OEM version only)
  • Mounting Hole: 18mm diameter
  • Antiskating: Ferrite magnets, friction free

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Turntableworld or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

Be the first to review Thorens TP-92 Tonearm. Write a review ›