(0)
£0.00

SME Model 20/3 Turntable

  code:SME20/3
From £8,544.00 (FREE UK Delivery)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

This finely engineered precision turntable is built to the same exacting standard and incorporates many design features originated for the Model 20/12. Massive construction, extensional damping of major surfaces and lack of vibration from moving parts ensures exceptional detail, resolution and uncoloured performance.

A turntable should address the problems of extraneous vibrations. These emanate from numerous sources including air and structural vibration from loudspeakers, groove modulation, stray electrical fields and mechanical imperfections in moving parts. In the Model 20/3, superb instrument quality machining is allied with fundamental physics. The higher the mass and stiffness of a body the less it will flex and vibrate; the duration of a vibration can be shortened by suitable damping.
 
Model 20/3 weighs approximately 28.6Kg (63lb), significant in relation to its size because it is density that matters. For example, the same weight of metal spread over a large enough area would be aluminium foil! The sub-chassis measures only 440mm (17 5/16") by 350mm (13 ¾") but weighs 11Kg (24lb). Its thickness 16mm (5/8") resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping.
 
The Model 20/3 has no 'sonic footprint'. The sub-chassis is suspended on forty purpose moulded 'O' rings which ensure freedom from feedback. The method of anchorage allows the rings to be removed or replaced in a matter of moments, even whilst a record is playing. A large centrally placed damper disciplines sub-chassis movement.
 
In addition to a cartridge's electrical output, mirror image acoustic signals reacted in the arm and record, will pass into the sub-chassis in the course of dissipation. However the usual closed loop design does not address the problem of their differing phase so in the Model 20/3 the structural interfaces concerned have received special attention to provide paths of the required impedance. This control of vibration is fundamental to the design of the player and goes much of the way to explaining the stunning tonal and dynamic neutrality that it exhibits.
 
The turntable is driven by a 3 phase, brushless outrunner inductance motor with 8-pole Neodymium magnets and 3 integrated Hall position sensors. The electronic controller uses a high performance microprocessor, optimised for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Fine pitch speed adjustment allows increments/decrements of +/-0.01% of selected speed. Speed ranges: 33.3, 45 & 78 rpm.
 
Available in 2 options:
  • SME20/3 - without a pick-up arm
  • SME20/3A - with a SME Series V pick-up arm fitted
Technical Specifications:
  • Four point suspension for stability
  • Sub-chassis suspended on eighty strands of rubber in the form of forty purpose moulded ‘O rings
  • Suspension adjustable through trimmers used in conjunction with a gauge to give recommended settings or varied to suit individual conditions
  • Central fluid damper controls sub-chassis motion and offers resistive ground-path for acoustic signals
  • Two screws lock down the sub-chassis and seal the damper for transport
  • 19mm diameter main spindle machined from high-chrome steel, hardened, ground and super finished runs in a sealed oil bath for lifetime lubrication
  • Screw down reflex record clamping system minimises record resonance
  • 6.5Kg (14lb) platter with unique Isodamp face machined with a fine scroll for optimum record interface
  • Generous use of extensional damping and resistive loop construction ensure sonic neutrality
  • Optional mounting on steel ball feet or compliant inserts, both affording levelling adjustment
  • Four jacking screws built into the sub-platter allow the thrust bearing to be off loaded for transit
  • The Power Supply design incorporates a 4-layer surface mount technology pcb with on-board user adjustable speed variation control
  • Large diameter strobe disc supplied allows precise adjustment of standard speeds
  • Speed range: 33 1/3, 45 & 78 rpm
  • Fully shielded in-line control unit
  • LEDs indicate the main functions
  • Complete with a comprehensive set of tools and equipment including Height Setting Gauge, Ø300mm Stroboscopic Disc, Reflex Record Clamp, Record Spindle Washer, Soft Cover and Operating Instruction Manual
  • Dimensions: 440 x 350 x 172mm
  • Packing: Substantial case
  • Net weight with power supply: 31Kg (68lb)
  • Shipping weight approximately: 45Kg (100lb)

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Turntableworld or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

Be the first to review SME Model 20/3 Turntable. Write a review ›