(0)
£0.00

Hadcock GH 228 Export Unipivot Tonearm

  code:GH228E
£791.49 (FREE UK Delivery)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
  • The entry model Unipivot from Hadcock

Hadcock GH228 Export tonearm

The GH 228 model comes with pure copper wiring internally and externally. The arm uses the same Stainless Steel arm tube and headshell as the 242 but is slightly shorter and due to there Unipivot design are light weight tone arms. Spare arm tubes and headshell's are available for all models.

The Hadcock 228 pick up arm, is an excellent upgrade for most ready supplied arms in today's mid price turntables. The two arm types offered the 228 and the 242 range share the same mounting body. The difference comes in the arm tube length and headshell.
The GH 228 model now just comes with pure copper wiring internaly and externaly. The arm uses the same Stainless Steel arm tube and headshell as the 242 but is slightly shorter and due to there Unipivot design are light weight tone arms. Spare arm tubes and headshell's are available for all models.

The GH 228 Export is the only remaining arm in the 228 range and uses a pure OFC internal wire, fly leads and Copper interconnects.

All 228 arm tubes are interchangeable, and the spare headhells allow for easy interchanging of cartridges. Giving the listener the choice of saving that expensive treasured cartridge for special listening sessions, whilst the old favourite can be employed at other times.

Set up of the arms is a little harder than a fixed pivot arm, however, comprehensive easy to follow instructions are included with every arm, and the quality of workmanship and finish make it a pleasure to assembly and fine tune. Once a unipivot is fixed and aligned, it will require minimal maintenance if any at all.

The GH 228 is suitable for almost all turntables including SME, Thorens, Michell, Nottingham Analogue, Linn and Origin Live to name but a few.

All arms come with a 1 year warranty against defective workmanship, and advice on cartridge types is freely offered.

Technical Specification

Hadcock 228 Pick up arm
Mounting Hole Diameter 3/8" (15.87mm)
Overall Length 12.10" (307.34mm)
Height 1.70" - 3.5" (43mm - 90mm)
Pivot Stem Length to Top of Arm 3.4" (86.4mm)
Pivot to Stylus Point 9.0" (228.6mm)
Pivot To Centre of Turntable 8.36" (212.85mm)
Offset Angle 23°
Rear Overhang 2.40" (60.9mm) maximum
Headshell Mounting 0.50" (12.7mm) centres
Cartridge Mass 3 - 12g

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Turntableworld or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

COLLECT IN STORE OR HOME INSTALL:At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience.

Be the first to review Hadcock GH 228 Export Unipivot Tonearm. Write a review ›