(0)
£0.00

Pro-Ject (Project) Xperience 2 Turntable/Tonearm/Cartridge pack

  code:PROJEXPE2PACK
£900.00 (FREE UK Delivery)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
  • Classicly styled favourite with a twist!

Project Xperience 2 Pack

The highly acclaimed Pro-Ject Xperience turntable in the stylish acrylic finish, supplied with a Pro-Ject 9CC Carbon Fibre tonearm and Ortofon 2M Blue MM Phono Cartridge. A fantastic combination suitable for a wide variety of listening styles.

Turntable Technical Data:

Nominal speeds - 33 / 45 r.p.m.
Dust cover - yes
Record clamp - yes
RCA phono sockets - yes
Sorbothane-damped aluminium cones - yes
Effective tonearm length - 9 " (230mm)
Overhang - 18mm
Downforce range - 10 - 30mN
Speed variance - ±0,5 %
Wow and flutter - ±0,08 %
Signal to noise - -70dB
Platter weight/diameter - 2kg/300mm
Power supply type - Mains-fed outboard power supply. 220 - 240V, 50 cycles or 100 - 110V, 60 cycles
Output voltage - 16V/500mA AC
Power consumption - 2W
Dimensions (lid open) - 460 x 390 x 460mm
Dimensions (lid closed) - 460 x 133 x 360mm
Weight - 7,7kg
Dimensions (W x H x D)

Tonearm Technical data:

Headshell - 0.5" (12,7mm) standard
Mounting distance - 212mm (platter --> tonearm base, Linn standard)
Supplied counterweight - cartridge weight 6 - 10g
Optional counterweights - cartridge weight 3 - 6g, 5 - 8g and 11 - 15g
Effective length - 9" (230mm)
Effective mass - 8.5g
Overhang - 18mm
Weight - 250g (without counterweight)

Cartridge Technical data:

Output voltage at 1000 Hz, 5cm/sec. - 0,5 mV
Channel balance at 1 kHz - < 1,5 dB
Channel separation at 1 kHz - > 23 dB
Channel separation at 15 kHz - > 15 dB
Frequency range at - 3dB - 20-30.000 Hz
Frequency responce - 20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *) - > 70 µm
Compliance, dynamic, lateral - 13 µm/mN
Stylus type - Nude elliptical diamond on alu cantilever
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1,6-2,0 g (16-20 mN)
Tracking force, recommended - 1,8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 5 Ohm
Recommended load impedance - > 10 Ohm
Cartridge body material - Lexan DMX
Cartridge colour - Black
Cartridge weight - 7 g

*) Typical value

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Turntableworld or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

Be the first to review Pro-Ject (Project) Xperience 2 Turntable/Tonearm/Cartridge pack. Write a review ›