Rega Replay Turntable

Backed by over 50 years of British engineering excellence, the handmade Rega Replay delivers exceptional, dynamic sound at an accessible price point with an unrivalled lifetime warranty. Designed to make high-fidelity vinyl plug-and-play simple, it eliminates all setup confusion: just slide on the balance weight, connect it to your amplifier, and you are ready to listen in under a minute. Whatever you play, Replay brings your vinyl collection to life exactly as the artist intended, without any unnecessary complexity. Key Features: Skeletal design low mass plinth EBLT Advanced drive belt RB110 handmade tonearm Factory fitted Carbon moving magnet cartridge Phenolic resin flywheel effect platter High-quality 24V low noise synchronous motor Removable custom dustcover with anti-rotational device Lifetime warranty against manufacture defects

Hana EL MK II Moving Coil Cartridge

Building upon a decade of critical acclaim, the Hana E Series MK II elevates both value and performance by integrating trickled-down technological advancements from Hana’s flagship Umami and M Series cartridges. Handcrafted in Yokohama, Japan, by the master artisans at Excel Sound, the MK II represents the next step in analog refinement, delivering exceptional trackability, vibrant musicality, and effortless setup. The EH (Elliptical High output) offers 2.0mv/1KHz output, if you require a lower output please see the EL MK II offers 0.4mV/1KHz. Key Features: High-output (2mV/1KHz) moving coil generator, wired for direct use with a standard MM phono stage Brass cap body with threaded mounting holes, shared with the Hana M Series, for a more rigid tonearm fit Elastomeric body coating for additional mechanical resonance control Cryogenically treated yoke, pole pieces and gold-plated terminal pins for improved signal transfer Classic Alnico magnet and aluminium cantilever construction Synthetic elliptical diamond stylus

Hana EH MK II Moving Coil Cartridge

Building upon a decade of critical acclaim, the Hana E Series MK II elevates both value and performance by integrating trickled-down technological advancements from Hana’s flagship Umami and M Series cartridges. Handcrafted in Yokohama, Japan, by the master artisans at Excel Sound, the MK II represents the next step in analog refinement, delivering exceptional trackability, vibrant musicality, and effortless setup. The EH (Elliptical High output) offers 2.0mv/1KHz output, if you require a lower output please see the EL MK II offers 0.4mV/1KHz. Key Features: High-output (2mV/1KHz) moving coil generator, wired for direct use with a standard MM phono stage Brass cap body with threaded mounting holes, shared with the Hana M Series, for a more rigid tonearm fit Elastomeric body coating for additional mechanical resonance control Cryogenically treated yoke, pole pieces and gold-plated terminal pins for improved signal transfer Classic Alnico magnet and aluminium cantilever construction Synthetic elliptical diamond stylus

Dual CS 718Q Manual Turntable

The Dual CS 718Q continues the legendary tradition of Dual’s iconic 7 Series, combining reference-grade analog performance with German precision engineering and leading autolift convenience. Built with a completely vibration-free direct drive motor, dynamic mass-less tracking force, and a carbon-aluminum sandwich tonearm, the CS 718Q delivers incredible audio fidelity, stability, and ease of use. Developed in Dual’s dedicated Design Centre in Germany and backed by a 5-year warranty, it stands as a modern flagship designed to last for generations. Key Features: Silent Direct Drive: Brushless motor with ironless air-core coils eliminates cogging and motor resonance completely. Classic Twin Gimbal Tonearm: Precision pivot ball bearings and twin gimbal mounting minimise micro-vibrations and tilting. Dynamic Tracking Force: High-precision German-made spiral spring ensures gravity-independent tracking, even on warped or off-level records. Carbon–Aluminum Sandwich Tonearm Tube: Offers maximum rigidity and resonance control with integrated precise height adjustment (+5 mm / -2 mm). Autolift & Auto-Stop Comfort: Preserves stylus life with automated tonearm lifting at the end of playback. Interchangeable Headshell: Features a screw-lock mechanism and azimuth adjustment for cartridge swaps in under a minute. Heavy Anti-Resonance Platter: 2.2 kg precision die-cast aluminum platter with a 4 mm heavy rubber mat and underside dampening coating. Premium Heavy MDF Plinth: Mounted on height-adjustable elastomer feet with integrated resonance absorbers; available in Satin Black or Real Walnut Veneer. 5-Year Warranty: Developed and engineered in Germany for long-term reliability and peace of mind.

Rega Turntable Wall Bracket Adaptors 2012 - Customer Return

Please Note: This listing is for a customer return meaning that the product has been opened. Aluminium push fit adaptors for the Rega turntable wall bracket allowing both the RP8 and RP10 to be used with the bracket. Please note : These adaptors only fit the older style Rega wallbracket - new adaptors are available for the current 2016 wall bracket.

Ortofon MC X50 Moving Coil Cartridge

Engineered for absolute audio perfection, the MC X50 stands as the crown jewel of the MC X Series. At its core is a nude Micro Ridge diamond stylus, precision-crafted with an exceptionally narrow side radius to deliver flawless tracking accuracy, reduced inner-groove distortion, and unmatched longevity. Paired with an ultra-rigid boron cantilever, the MC X50 achieves breathtaking transient response, surgical resolution, and near-zero distortion. Complete with a custom-formulated, newly developed rubber suspension system, this cartridge is meticulously tuned to bring out the absolute best in your vinyl collection. Key Features: Pure Silver Coil System Newly developed rubber suspension Moving Coil cartridge design Nude Micro Ridge Stylus Superior boron cantilever

Rega Fono MC MK4 Moving Coil Phono Preamplifier - Customer Return

Please note: This is a one time listing for an ex-demonstration unit at a discounted price, please note there are substantial marks to the front of the unit. The Fono MC MK4 is an exceptionally high quality MC phono stage designed to maximise the potential of any low output MC cartridge. Although specifically designed to compliment the latest Rega range of moving coils you will find full adjustability for gain and loading via dip switches conveniently placed on the rear panel making the Fono MC MK4 compatible with a wide range of third party low output MC cartridges. Now housed in a brand new redesigned case to match the new Fono MM MK5 and Neo MK2 and Rega’s latest range of electronic components offering a modern look guaranteed to integrate in to any hi-fi system. Key Features: Dedicated moving coil phono stage Simple connectivity and operation Fully adjustable via DIP switches via rear panel MUSE operational amplifier used in RIAA equalization amplifer Two selectable gain settings Default factory settings matched for all Rega MC models Latest design custom casework Lifetime warranty against manufacture defects

Ortofon Premium Libelle Spirit Level

Accurate levelling is the critical starting point for high-fidelity vinyl playback, as even minor deviations can compromise tracking performance and channel balance. Developed by Ortofon, the Premium Libelle is engineered to deliver precise horizontal alignment for your turntable. It provides a full 360-degree overview with 1-degree precision, allowing you to fine-tune your setup with absolute confidence. Precise levelling is essential for optimal tonearm performance; it ensures accurate tracking, reduces distortion, and minimises unnecessary record and stylus wear.

Shelter 501 III Moving Coil Cartridge - Ex-Demo

Please Note: This is a one time listing for an ex-demonstration unit at a discounted price, please note there maybe cosmetic imperfections. The Shelter 501 III MC phono cartridge is the latest development of the 501 series. Through continued refinement, the 501 III is equally responsive to the most recent recordings or any of your most cherished albums. The 501 III has a combination of an aluminium-clad boron cantilever and an elliptical diamond stylus tip. The expressiveness, power and energy fare superbly balanced to the highest level.

Nagaoka Inner Sleeves

50-Pack Anti-Static Record Sleeves - Protect your vinyl collection from dust, dirt, and static buildup. Specially treated with an anti-static finish, these premium sleeves allow your records to slide in and out smoothly, preventing scratches and ensuring a seamless, friction-free experience every time you play.

Nagaoka JN-P700 Stylus

The Nagaoka JN-P700 is the genuine factory replacement stylus designed specifically for the flagship Nagaoka MP-700 phono cartridge. Crafted with meticulous Japanese precision, this replacement stylus restores your turntable to its peak performance, delivering the breathtaking clarity, warmth, and detail you fell in love with. Stylus Specifications: Compatibility: Nagaoka MP-700 / MP-700H Cartridges Stylus Type: Precision Polished Diamond Tracking Force Range: 1.3g – 1.8g, Recommended: 1.5g

Nagaoka MP-500 Cartridge

As Nagaoka’s top-of-the-line cartridge, the MP-500 delivers unparalleled clarity and an immersive sound quality that makes you feel as though you are standing right on an orchestra's podium. Engineered to work best with superior Hi-Fi components, this cartridge features exclusive high-fidelity performance driven by a superfine polished line-contact diamond stylus tip and a low-mass, high-strength boron cantilever. Its premium construction is rounded out by a powerful samarium cobalt magnet, a carbon-fibre-reinforced plastic pole shoe, and an anti-ferro-magnetic permalloy shield casing, ensuring an elite, ultra-precise audio experience. Technical Specifications Output voltage: 3 mV(5 cm/sec) Frequency response: 20-25,000 Hz Channel seperation: 27 dB(1 K Hz) Channel balance: 1.0 dB or less Load Impedance: 47 KΩ Load Capacitance: 100 pF Vertical Tracking Force: 1.3-1.8g Cantilever: Boron Stylus tip: line-contact naked diamond

Nagaoka JN-P500 Stylus

The Nagaoka JN-P500 is the genuine factory replacement stylus designed specifically for the critically acclaimed Nagaoka MP-500 phono cartridge. Precision-engineered in Japan, this stylus is the key to restoring your turntable's elite tracking capabilities, legendary warmth, and astonishing detail. Stylus Specifications: Compatibility: Nagaoka MP-500 / MP-500H Cartridges Stylus Type: Line-contact naked diamond Tracking Force Range: 1.3g – 1.8g

Nagaoka MP-300 Cartridge

The MP-300 is an advanced technology cartridge engineered for superior record groove recovery, featuring a superfine polished elliptical diamond stylus tip mounted on a low-mass, high-strength boron cantilever. Its sophisticated architecture includes a powerful samarium cobalt magnet, a carbon-fibre-reinforced plastic pole shoe, and an anti-ferro-magnetic permalloy shield casing. Together, these premium components deliver exceptional spatial imaging and acoustic accuracy, precisely replicating the positions of individual jazz players and orchestra instruments alike. Technical Specifications Output voltage: 3 mV(5 cm/sec) Frequency response: 20-25,000 Hz Channel seperation: 25 dB(1 K Hz) Channel balance: 1.0 dB or less Load Impedance: 47 KΩ Load Capacitance: 100 pF Vertical Tracking Force: 1.3-1.8g Cantilever: Boron Stylus tip: 0.4 x 0.7 mil elliptical naked diamond

Nagaoka MP-200 Cartridge

The MP-200 delivers an organic, fluid presentation characterised by rich, mellow tones and a remarkably natural rendering of vocals and instruments. Boasting well-balanced fidelity across its entire dynamic range, it is the perfect companion for the intricate nuances of classical and jazz music. Technical Specifications Output voltage: 4 mV(5 cm/sec) Frequency response: 20-23,000 Hz Channel seperation: 25 dB(1 K Hz) Channel balance: 1.5 dB or less Load Impedance: 47 KΩ Load Capacitance: 100 pF Vertical Tracking Force: 1.5-2.0g Cantilever: Boron Stylus tip: 0.4 x 0.7 mil elliptical naked diamond

Nagaoka JN-P200 Stylus

Rediscover the depth, warmth, and energy of your record collection. The Nagaoka JN-P200 is the genuine factory replacement stylus designed specifically for the highly acclaimed Nagaoka MP-200 phono cartridge. Precision-crafted in Japan, this stylus restores your cartridge to its original brilliance, delivering the vivid clarity and exceptional musicality that vinyl enthusiasts crave. Stylus Specifications: Compatibility: Nagaoka MP-200 / MP-200H Cartridges Stylus Type: 0.4 x 0.7 mil elliptical naked diamond Tracking Force Range: 1.5g – 2.0g

Nagaoka JN-P110 Stylus

Bring the magic back to your turntable setup. The Nagaoka JN-P110 is the genuine factory replacement stylus designed specifically for the legendary Nagaoka MP-110 phono cartridge—widely considered the undisputed champion of price-to-performance audio. Precision-crafted in Japan, this stylus restores the warmth, punch, and musicality that made your cartridge an instant classic. Stylus Specifications: Compatibility: Nagaoka MP-110 / MP-110H Cartridges Stylus Type: 0.4 x 0.7 mil elliptical bonded diamond Tracking Force Range: 1.5g – 2.0g

Pro-Ject Cover-IT Artist Dust Cover

The Cover-it-RS is an acrylic dust cover designed to fit over your record player with a cutout for cables on the back, protecting it from dust and other environmental risks when not in use. Compatible Turntables: AC/DC Turntable The Dark Side Of The Moon Turntable Metallica Turntable Yellow Submarine Turntable Technical Specifications: Material: Acrylic 636 x 180 x 476 mm (Outside Dimensions) 628 x 176 x 468 mm (Inside Dimensions) Weight: 3.2 kg Please Note: This item may come with a protective plastic film both on the inside and outside of the lid that should be removed before use. *Turntable not included

Pro-Ject Cover it RS Dust Cover

The Cover-it-RS is an acrylic dust cover designed to fit over your record player with a cutout for cables on the back, protecting it from dust and other environmental risks when not in use. Compatible Turntables: Signature 12.2 Technical Specifications: Material: Acrylic 620 x 240 x 525 mm (Outside Dimensions) 600 x 235 x 510 mm (Inside Dimensions) Weight: 4.3 kg Please Note: This item may come with a protective plastic film both on the inside and outside of the lid that should be removed before use. *Turntable not included

Pro-Ject Cover it DS Dust Cover

The Cover-it-DS is an acrylic dust cover designed to fit over your record player with a cutout for cables on the back, protecting it from dust and other environmental risks when not in use. Compatible Turntables: Signature 10 RPM 5 / 9 / 10 Carbon Technical Specifications: Material: Acrylic 525 x 290 x 425 mm (Outside Dimensions) 465 x 130 x 380 mm (Inside Dimensions) Weight: 4.3 kg Please Note: This item may come with a protective plastic film both on the inside and outside of the lid that should be removed before use. *Turntable not included

Audio-Technica AT607b EU Stylus Cleaning Fluid

AT607b stylus cleaning fluid - 12ml volume. The AT607 stylus cleaning fluid extends both stylus and record life. The special cleaning formula dissolves dust and dirt known to hinder proper tracking. An applicator brush is attached to the cap for ease of use. Key Features: Remove dust from stylus Contains quick-drying fluid Easy to use brush on the back side of the cap

Audio-Technica AT-VMN20xEB Replacement Stylus Elliptical Bonded - Customer Return

Please Note: This listing is for a customer return meaning that the product has been opened and used. VMNX20CB Replacement stylus for AT-VM520xEB. Key Features: Elliptical Bonded Stylus Tracking force 1.8 to 2.2 g (2.0 g standard)

Rega Planar 6 RS Turntable

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation. The Rega Planar 6 RS Edition represents a significant leap in performance, bridging the gap between the standard Planar 6 and the high-end Planar 8. This "Rega Special" edition retains the classic form factor and dustcover but incorporates elite engineering usually reserved for the tier above. Built on an ultra-lightweight Tancast 8 foam core plinth with a unique aluminum HP laminate skin, it provides a rigid, low-resonance foundation for its advanced components. The RS Edition comes factory-fitted with the precision RB880 tonearm and the multi-award-winning Nd9 moving magnet cartridge, both expertly aligned for immediate high-fidelity playback. Accuracy is further enhanced by a hand-tuned 24v motor driving an aluminum sub-platter via a CNC twin drive pulley and dual Reference EBLT drive belts, all governed by the included Neo MK2 PSU. Key Features:  RB880 tonearm with custom stainless balance weight Nd9 Reference MM factory fitted as standard CNC Twin drive motor pulley Tancast 8 foam core plinth with HP laminate and metal skin Dual Layer float glass Opti-white clear glass platter Custom matched Neo Mk2 turntable power supply Twin Reference EBLT drive belts 24v low noise synchronous low voltage precision motor Double Brace Technology Smoked dustcover Lifetime warranty against manufacture defects

Sumiko Oriole Low Output Moving Coil Cartridge

The Oriole upholds the refined, fatigue-free tonal balance that has made Sumiko a global benchmark. By integrating a low-impedance generator with a nude Shibata line-contact stylus, the Oriole represents a significant evolution from the Songbird, rivaling the legendary performance of the Starling. It delivers impeccable tracking and an emotionally charged dynamic range, characterised by lightning-fast transients and a sophisticated, "sweet" resolution. Wholly analog in nature, the Oriole renders music with a natural sense of ambiance and cohesion. Operating with near-silent groove noise, it allows music to emerge from a stark, "black" background, inviting the listener into an expansive and intimate soundstage. Key Features: Low Output Moving Coil Nude Shibata Natural Diamond Stylus Output (3.54cm/sec @ 1kHz): 0.3mV Cartridge Mass: 7.3g  

Dual CS 418 Manual Turntable - Customer Return

Please note: This is a customer return item, however the item has not been opened/used. There is slight damage on the box but this is only superficial.  Emphasis on high component precision is a feature of the entire range of Dual products. This is the case for the entry model CS 418, which uses the same platform as the higher models in the product range. Key Features: Switchable built-in MM phono stage Ortofon 2M Red Cartridge Folded MDF construction with a black vinyl veneer Elastomer vibration absorber integrated inside the feet Removable dust cover Precise aluminium die-cast Heavy rubber mat for resonance damping Solid platter bearing with a hardened steel spindle in a brass bushing Solid aluminium construction with ball-bearings Damped tonearm lift Adjustable tracking force and anti skating Low vibration DC-Servo-Motor Rubber mountings for vibration decoupling Precision cut belt for lower wow & flutter

Audio-Technica AT-628a Stainless Steel Disc Stabiliser

Elevate your vinyl experience with the AT628a, a precision-engineered stainless-steel record stabiliser designed to anchor your music in clarity. By applying consistent pressure across the turntable spindle, this 450 g disc eliminates unwanted vibrations and ensures your records stay perfectly flat for superior tracking and audio fidelity. Key Features: Enhanced Sonic Clarity: Minimises resonance by securing the record firmly to the platter, resulting in a cleaner, more detailed soundstage. Smart Underside Design: Features dual recessed inner rings to accommodate warped discs or those with centre bulges, ensuring flush contact with the vinyl surface. Premium Build: Machined from high-grade stainless steel that resists corrosion and oxidation. Its non-magnetic properties mean zero interference with your sensitive phono cartridge. Ergonomic Grip: The sleek, modern profile is machined for a secure, easy grip when placing or removing the stabiliser. Note on Compatibility: Before use, please verify that your turntable’s motor and bearing can support a 450 g load.The AT628a is not compatible with entry-level or lightweight models, including the Sound Burger, AT-LP60/X, AT-LP70X, AT-LP3XBT, or AT-LPW30. It is best paired with Audio-Technica premium and step-up models.t

Audio-Technica AT-VM95EBK/H Moving Magnet Cartridge on AT-HS6 Headshell

VM95 series Elliptical stereo cartridge on AT-HS6 Headshell.   AT-VM95EBK/H VM95 series Elliptical stereo cartridge on AT-HS6 Headshell - AT-VM95E mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

Audio-Technica AT-VM95EBK Moving Magnet Cartridge

AT-VM95EBK VM95 series Elliptical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT95E and AT95EX.   Key Features: Aluminium cantilever 4.0mV output voltage Compatible body with all VM95 Series stylus assemblies Replacement for AT95E and AT95EX 20 to 22,000Hz frequency response

Rega RB3000 Tonearm

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation. The RB3000 represents the pinnacle of Rega’s tonearm engineering, pushing the boundaries of analog design to achieve near-zero tolerances. Meticulously hand-built by a team of highly skilled technicians, the RB3000 is a masterclass in precision. It features an innovative, hand-polished aluminium arm tube designed to redistribute mass and eliminate resonance, ensuring the most stable platform possible for your cartridge. At its heart are improved, hand-selected bearings, each uniquely matched to its spindle as an interference fit. This Rega-developed method ensures there is no measurable "play" in the assembly, dramatically increasing the amount of detail retrieved from the record surface. Built without the use of adhesives to maintain maximum rigidity, the RB3000 is designed to maximise the performance of both the tonearm and your chosen cartridge (sold separately). Key Features: Meticulously hand built Hand selected bearings to be an interference fit with the paired spindle Near frictionless movement horizontally and vertically Designed for maximum performance Lifetime warranty against manufacture defects

Rega AOS Moving Coil Phono Stage

Announced at Bristol HiFi Show 2026, The Rega AOS is a high-performance, dedicated moving coil pre-amplifier designed to bridge the gap between entry-level stages and cost-no-object reference components. Built around a circuit design derived heavily from Rega's award-winning Aura Reference MC, the AOS provides a "no compromise" approach to vinyl playback.    Housed in a custom-engineered, half-width aluminium chassis, the AOS delivers the exceptional definition and vivid realism required to bring your favourite recordings to life. The AOS is available for demonstration in our Showroom alongside the Planar 10 Turntable with Apheta 3 MC Cartridge and Rega Amplifiers. Key Features: Aura-Derived Circuitry: Reference-grade topology for high-end transparency and scale.    Custom Aluminium Chassis: Provides effective RFI shielding and a compact, half-width footprint.    Zero Digital Interference: A pure analogue signal path for the ultimate "black" background.    Automatic Standby: A switchable feature that puts the unit to sleep when no signal is detected (can be deactivated via rear dip-switches).    Lifetime Warranty: Backed by Rega’s legendary lifetime warranty against manufacturing defects.  

Pro-Ject Cover-IT E - Elemental Dust Cover - Customer Return

Please Note: This listing is for a customer return meaning that the product has been opened, the protective plastic film is still intact and should be removed before use. This is a special version of the Pro-Ject Cover-IT range designed to cater specifically for the Elemental and Elemental Phono USB turntables and will not fit other turntables. This dust cover is designed to fit snuggly over your record player, protecting it from dust and other external risks when not in use. Technical Specifications: Outer Dimensions (W/H/D): 471mm/103mm/331mm Inner Dimensions (W/H/D): 465mm/100mm/325mm Weight: 0.6kg

Dynavector P75 MK4.1 MM/MC Phono Preamplifier

The Dynavector P75 Mk4.1 is a masterclass in versatility. This compact, high-performance phono stage is fully user-adjustable to suit virtually any MM or MC cartridge on the market. Renowned for its extreme RIAA accuracy and ultra-low noise floor, the P75 delivers an expansive dynamic range that punches far above its weight class. Key Features: New to the Mk4.1 Completely new power supply, powered by a USB PD power adaptor.  New to the Mk4.1 A steep rolloff subsonic (rumble) filter  Phono to line level preamplifier Total phono solution Matches any cartridge type Fully user adjustable Ultra low noise Extreme RIAA accuracy High current line driver for long cables or difficult loads Includes patented 'Phono Enhancer' option Low cost, very high performance

Audio-Technica AT-LP7X Manual Belt-Drive Turntable

The Audio-Technica AT-LP7X is a fully manual, belt-drive turntable that balances classic analogue excellence with modern versatility. Its high-density MDF chassis and 20mm acrylic platter are engineered to eliminate resonance, delivering a sound as refined as its sleek matte-black finish. The LP7X features optimised geometry to ensure the platter, spindle, and tonearm work in perfect harmony for distortion-free tracking. Its J-shaped aluminum tonearm—inspired by iconic Audio-Technica designs from the 60s and 70s—utilises a precision dual-axis gimbal and metallic ball bearings to extract every detail from your vinyl. AT-LP7X Key Features Manual Belt-Drive: Two-speed operation (33-1/3 and 45 RPM) with a precision speed-sensor motor. Anti-Resonance Design: Heavy 40mm MDF cabinet and 20mm high-density acrylic platter eliminate vibration. Precision Tracking: J-shaped tonearm with adjustable VTA and anti-skate control for accurate playback. Premium Cartridge: Pre-mounted AT-VM95E BK (Elliptical) on a lightweight AT-LT10 headshell. Highly Versatile: Built-in switchable phono preamp for both MM and MC cartridges. Expandable: Compatible with all VM95 styli and includes a subcounterweight for heavier cartridge/headshell combos. Everything Included: Comes with a dual RCA cable (with ground), 45 RPM adapter, and removable dust cover.

Rega Nd9 Moving Magnet Cartridge - Rebuild

This product requires your old Rega Nd7 Moving Magnet Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to: HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ The Nd9 cartridge draws on decades of expertise in cartridge engineering and cantilever design to deliver the highest-performing moving magnet cartridge the company has ever produced. The design team introduced a Boron rod cantilever with a Fine Line stylus profile based on the reference Aphelion 2 moving-coil cartridge for use in the Nd9. The Boron cantilever offers exceptional stiffness and low mass, enabling ultra-fast response and outstanding playback accuracy. Key Features: Fine Line nude diamond profile Boron cantilever Neodymium magnet Unique generator Rega 3 point mounting system Highly rigid PPS body Handmade stereo cartridge 100% recyclable packaging Available factory fitted on the Planar 8 turntable. Lifetime warranty against manufacture defects  

Rega Nd9 Moving Magnet Cartridge

The Nd9 cartridge draws on decades of expertise in cartridge engineering and cantilever design to deliver the highest-performing moving magnet cartridge the company has ever produced. The design team introduced a Boron rod cantilever with a Fine Line stylus profile based on the reference Aphelion 2 moving-coil cartridge for use in the Nd9. The Boron cantilever offers exceptional stiffness and low mass, enabling ultra-fast response and outstanding playback accuracy. Key Features: Fine Line nude diamond profile Boron cantilever Neodymium magnet Unique generator Rega 3 point mounting system Highly rigid PPS body Handmade stereo cartridge 100% recyclable packaging Available factory fitted on the Planar 8 turntable. Lifetime warranty against manufacture defects  

Audio-Technica AT33xMONO/II Dual Moving Coil Monaural Cartridge

The AT33xMONO/II uses a "True Mono" dual moving coil design that is engineered for pristine monaural playback. By only generating signal from the horizontal groove movement, it effectively ignores vertical noise components. The result is exceptionally clear mono sound, characterised by a more substantial low end and significantly reduced surface noise. This design is also perfectly suited for playing mono records on a stereo system. Key Features: Stylus & Type: AT33x Series dual moving coil monaural cartridge with a 0.65 mil conical nude stylus. Acoustic Focus: Preserves the warmth and fullness of acoustic instruments, making it ideal for classic mono jazz recordings from the 1950s and '60s. True Mono Design: “True Mono” dual moving coil design generates the electrical signal only from horizontal movement, resulting in exceptionally clear monaural sound with a substantial low end and reduced surface noise. Coil Material: PCOCC (Pure Copper by Ohno Continuous Casting) coils provide pure, smooth signal transmission. Magnet System: Samarium cobalt magnet and pure iron yoke ensure highly efficient power generation, producing warm, richly textured playback. Resonance Control: The composite cartridge body (die-cast zinc, aluminium, and high-rigidity polymer) reduces resonance for balanced, natural sound reproduction. Vibration Damping: Highly rigid and dense die-cast zinc at the base suppresses unwanted vibrations, improving mid-to-low frequency expressiveness. Cantilever & Suspension: Features a high-hardness duralumin pipe cantilever and a newly developed suspension/damper design (with lower dynamic compliance) compatible with a variety of tonearms. Installation: Threaded mounting holes simplify headshell mounting. Terminal Quality: Thick gold plating on the terminal pins reduces contact resistance and enhances sound quality. Craftsmanship: Crafted and hand-finished by artisans in Japan.  

Audio-Technica AT33xMONO/I Dual Moving Coil Monaural Cartridge

The AT33xMONO/I features a "True Mono" dual moving coil design engineered specifically for superior monaural playback. This design is uniquely capable of generating the electrical signal only from horizontal movement within the record groove. Crucially, the system remains unaffected by any vertical noise components, which typically contribute to signal interference. This specialised focus results in exceptionally clear monaural sound, characterised by a more substantial low end and significantly reduced surface noise. Furthermore, this dual mono coil design is perfectly ideal for achieving authentic mono playback on a standard stereo system. This monaural cartridge, featuring a 0.65 mil conical nude stylus, is engineered for balanced, high-resolution sound reproduction, bringing out all the details in the music. Key Features: "True Mono" Design: The dual moving coil system only generates a signal from horizontal movement, effectively eliminating vertical noise components. This results in exceptionally clear mono sound, reduced surface noise, and a substantial low end. Pure Signal Path: Uses PCOCC coils and an optimised neodymium magnet/permendur yoke for high-resolution, responsive playback. Resonance Control: The composite body (die-cast zinc, aluminum, high-rigidity polymer) and dense die-cast zinc base actively reduce and suppress unwanted vibrations across all frequencies, particularly in the mid-to-low range. Durable Build: Features a high-hardness duralumin pipe cantilever and a newly developed suspension system (with lower dynamic compliance) compatible with various tonearms. Convenience: Includes threaded mounting holes and thick gold plating on the terminal pins to reduce contact resistance. Quality: Hand-finished by artisans in Japan.

Audio-Technica AT33xMLD Dual Moving Coil Stereo Cartridge

The AT33xMLD delivers warm, highly detailed sound, a superb match for both rock and jazz genres. It features a microlinear nude stylus mounted on a duralumin tapered pipe cantilever. Key to its performance is our newly engineered suspension system, which utilises piano wire to enhance tracking accuracy. This results in a slight decrease in dynamic compliance, providing a more substantial and impactful audio presentation, particularly in the mid-to-low frequency range. Key Features: Sound Profile: Delivers warm, detailed, and natural sound, making it an excellent choice for rock and jazz records (especially '50s-'70s recordings). Stylus & Cantilever: Features a microlinear nude stylus for highly accurate groove tracking, mounted on a high-hardness duralumin tapered pipe cantilever. Engineered for Clarity: Dual Moving Coil Design: Provides outstanding channel separation via independent left and right coils. PCOCC Coils: Uses Pure Copper by Ohno Continuous Casting for pure, smooth signal transmission. Vibration Control: Composite Body: Reduces resonance with a blend of die-cast zinc, aluminum, and high-rigidity polymer. Die-Cast Zinc Base: Suppresses unwanted vibrations, improving mid-to-low frequency expressiveness. Convenience & Quality: Threaded mounting holes for easier headshell installation. Features thick gold plating on terminal pins to reduce contact resistance. Hand-finished by artisans in Japan.

Audio-Technica AT33xMLB Dual Moving Coil Stereo Cartridge

The AT33x Series is the first major overhaul of the AT33 in years, bringing new warmth and fullness to music. Technological advances, including the first use of die-cast zinc at the cartridge base, minimise resonance and boost mid-to-low frequency expressiveness, ensuring you hear the finest details across the entire audio spectrum. The AT33xMLB is engineered for high-resolution tracking. It features a microlinear nude stylus on a solid boron tapered cantilever, capable of capturing the subtlest groove details. This precision is ideal for detailed orchestral recordings and high-fidelity records made since the late 1970s. A new piano wire suspension enhances tracking accuracy, slightly lowering dynamic compliance for more substantial audio, particularly in the mid-low range. Key Features: Microlinear Stylus: Tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than standard elliptical or conical styli. Solid Boron Cantilever: Tapered design ensures rapid vibration transmission for accurate reproduction of dynamic musical passages. Dual Moving Coil: Independent left and right coils provide outstanding channel separation. PCOCC Coils: Used for pure, smooth signal transmission. Composite Body: Constructed from die-cast zinc, aluminum, and high-rigidity polymer to reduce and disperse resonance for a balanced, natural sound. Zinc Base: Highly rigid, dense die-cast zinc suppresses unwanted vibrations and improves mid-to-low frequency expressiveness. High-Fidelity Components: Neodymium magnet and permendur yoke maximise efficiency for high-resolution playback. Advanced Suspension: Newly developed mechanism and damper design (with lower dynamic compliance) allow compatibility with a variety of tonearms. Double-Step Armature: Increases cantilever rigidity for better resonance suppression. Quality & Convenience: Features threaded mounting holes for easy setup, gold-plated terminal pins for enhanced sound quality, and is hand-finished by artisans in Japan.  

Audio-Technica AT33xEN Dual Moving Coil Stereo Cartridge

The AT33x Series is the first major update to the venerable AT33 in years, engineered to bring new warmth and fullness to your music. Technological improvements include the use of die-cast zinc in the cartridge base to fight resonance and enhance mid-to-low frequency expressiveness, letting you hear the finest details across the audio spectrum. The AT33xEN is an excellent all-around cartridge, delivering warm, full-bodied sound. It features a 0.3 x 0.7 mil elliptical nude stylus on a hard duralumin tapered pipe cantilever for excellent tracking and high-frequency control. A new piano wire suspension mechanism improves tracking accuracy and slightly lowers dynamic compliance for more substantial audio, especially in the mid-low range. Key Features: AT33x Series dual moving coil stereo cartridge with 0.3 x 0.7 mil elliptical nude stylus Dual moving coil design, featuring independent left and right coils, provides outstanding channel separation PCOCC (Pure Copper by Ohno Continuous Casting) coils provide pure, smooth signal transmission Neodymium magnet and permendur yoke maximise energy efficiency for high-resolution, responsive playback Composite cartridge body (die-cast zinc, aluminium, and high-rigidity polymer) Highly rigid and dense die-cast zinc material is used at the base of the cartridge to suppress unwanted vibrations and improve the expressiveness of the mid-to-low frequency range 0.3 x 0.7 mil elliptical nude stylus tracks the record groove with accuracy for outstanding audio reproduction High-hardness duralumin tapered pipe cantilever enhances high-frequency control  Newly developed suspension mechanism and rubber damper design enable the cartridge to be used with a variety of tonearms  Thick gold plating on the terminal pins reduces contact resistance and enhances sound quality

Dual CS 418 Turntable, Advance Paris X-i50 BT Integrated Amplifier & Scansonic M40 Speakers

Experience the best of analog and digital audio with this complete hi-fi bundle. At the core is the German-engineered Dual CS418 Turntable, featuring a precision aluminum tonearm and a pre-mounted Ortofon 2M Red cartridge for detailed vinyl playback. Powering the system is the versatile Advance Paris X-i50 BT Integrated Amplifier (2 x 50W RMS), which features a high-bias mode for nuanced sound, a built-in MM Phono Stage for the turntable, and integrated Bluetooth for wireless streaming. Finally, the system delivers rich, expansive sound through the elegant Scansonic M40 Floorstanding Speakers, which feature high-resolution ribbon tweeters for clear highs and a four-driver array for powerful bass, ensuring a truly immersive listening experience. Includes 10m of speaker cable so you can set up and start listening right away.

Rega Planar 1 Turntable and Advance Paris AIR65 Speakers

Start your vinyl journey instantly with this powerful and precise audio system. The multi-award-winning Rega Planar 1 Turntable is designed for the ultimate "plug and play" experience, featuring the high-performance RB110 tonearm with pre-set bias and a factory-fitted Rega Carbon cartridge. The perfect partner is the versatile Advance Paris Air65 Active Speakers, which feature a built-in amplifier delivering 2x55W RMS and a dedicated Phono MM input. This ensures a high-quality, direct connection for the Planar 1 (which lacks an internal preamp). Enjoy true audiophile sound from your records, or stream effortlessly from any device via the speakers' integrated Bluetooth aptX. It’s the simplest way to get stunning, detailed sound from all your music sources. Rega Planar 1 Turntable The multi-award-winning Rega Planar 1 is the ultimate "Plug and Play" turntable, designed to deliver performance well beyond its price point with a setup time of under 30 seconds. It features a handmade RB110 tonearm with ultra-low friction bearings and pre-set bias, plus a factory-fitted Rega Carbon cartridge. Driven by a high-quality 24V low noise synchronous motor and Rega's EBLT Advanced drive belt, it ensures superior speed stability with its heavy phenolic resin flywheel platter. The deck is finished with a sleek matt finish and backed by a lifetime warranty against manufacturing defects. Advance Paris AIR 65 Speakers The Advance Paris AIR 65 Connected speakers offer a versatile hi-fi experience with powerful sound and comprehensive connectivity. Ready for any source, the active speakers feature integrated Bluetooth for effortless wireless streaming, alongside inputs including Optical, Coaxial, and two RCA Analog ports. Crucially, they boast a dedicated Phono MM input, allowing direct connection of a turntable. Delivering 2x55W RMS power, the system is easily controlled with the included remote, and can be upgraded with an optional WTX-MicroStream adapter for Wi-Fi audio streaming and app control.

Audio-Technica AT-LP70X Turntable - Black and Advance Paris AIR65 Speakers

Experience the warm, rich sound of vinyl without the hassle. This bundle pairs the Audio-Technica AT-LP70X Turntable with the versatile Advance Paris Air65 Active Bluetooth Speakers. The AT-LP70X is a high-quality, fully automatic belt-drive turntable with a great AT-VM95C cartridge and a switchable built-in preamp. The powerful Air65 speakers deliver 2x55W RMS of detailed sound and feature a dedicated MM Phono input—so everything connects easily. Play records instantly, or stream from your phone via Bluetooth aptX. It’s the perfect system for both vinyl lovers and modern music streamers. Audio-Technica AT-LP70X Turntable Crafted for new vinyl enthusiasts, the AT-LP70XBT Automatic Wireless Turntable is a great way to start your audio journey. It delivers the classic, warm sound of vinyl while offering the modern convenience of Bluetooth® technology. You can easily stream your records to Bluetooth speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. Advance Paris AIR 65 Speakers The Advance Paris AIR 65 Connected speakers feature integrated Bluetooth, enabling effortless wireless device connections to phones and laptops. For additional fidelity the AIR 65s are also available with the optional WTX-MicroStream which allows for Wi-Fi connectivity for seamless audio streaming. Key Features: 1 x Optical and 1 x Coaxial Digital inputs. 2 x RCA Analog Input, 1 subwoofer output. Turntable ready with Phono MM (Moving Magnet) input. The speakers can be controlled via the included remote control, or if using the optional WTX-MicroStream via the Advance PlayStream app Optional WTX-MicroStream network adapter for WiFi streaming.

Dual CS 429 Turntable and Advance Paris AIR65 Speakers

Experience the best of analog and modern audio with this perfectly matched Hi-Fi bundle. The Dual CS 429 Fully Automatic Turntable offers pure vinyl pleasure with ultimate convenience—simply press a button and let its precision mechanics, Ortofon 2M Red cartridge, and built-in switchable phono preamp handle the rest. Paired with the powerful Advance Paris AIR 65 Active Bluetooth Speakers, you get a complete, high-fidelity system right out of the box. These 2x55W bookshelf speakers are ready for your turntable thanks to their dedicated Phono (MM) input, and they offer modern versatility with high-quality aptX Bluetooth, Optical, and Coaxial digital inputs for all your streaming and TV audio needs. Dual CS429 The fully automatic function of the CS 429 provides maximum ease of use. The tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button. Advance Paris AIR 65 Speakers: The Advance Paris AIR 65 Connected speakers feature integrated Bluetooth, enabling effortless wireless device connections to phones and laptops. For additional fidelity the AIR 65s are also available with the optional WTX-MicroStream which allows for Wi-Fi connectivity for seamless audio streaming. Key Features: 1 x Optical and 1 x Coaxial Digital inputs. 2 x RCA Analog Input, 1 subwoofer output. Turntable ready with Phono MM (Moving Magnet) input. The speakers can be controlled via the included remote control, or if using the optional WTX-MicroStream via the Advance PlayStream app Optional WTX-MicroStream network adapter for WiFi streaming.

Dual CS 418 Black and Advance Paris AIR65 Speakers

Experience high-fidelity vinyl playback with this perfectly matched system. The Dual CS 418 Turntable is a manually operated deck featuring German precision engineering, a switchable built-in phono preamp, and a premium Ortofon 2M Red cartridge for detailed, dynamic sound. This pairs flawlessly with the versatile Advance Paris Air65 Active Bluetooth Speakers. These powerful speakers deliver 2x55W RMS and feature a dedicated MM Phono input, creating a direct, simple connection to the turntable. Enjoy the best of both worlds: audiophile-grade vinyl and modern convenience with Bluetooth aptX streaming—all in one elegant, easy-to-set-up package. Simply unpack, connect, and play. Dual CS 418 Turntable:  The entry-level Dual CS 418 turntable demonstrates the brand's commitment to high component precision by sharing a robust platform with its higher-end models. Its premium build features include a solid, folded MDF plinth with a black vinyl veneer, supported by elastomer vibration absorbers in the feet and a durable, removable dust cover. For superior playback, the CS 418 utilises a low-vibration DC-Servo-Motor with rubber mountings and a precision-cut belt to minimise noise, driving a precise aluminum die-cast platter with a heavy rubber mat for optimal resonance damping. The tonearm is a solid aluminum design with ball bearings and a damped tonearm lift, offering fine-tuning capabilities with adjustable tracking force and anti-skating for accurate record tracking. Advance Paris AIR 65 Speakers: The Advance Paris AIR 65 Connected speakers are a versatile hi-fi solution, featuring integrated Bluetooth for easy wireless streaming from phones and laptops. They offer extensive connectivity, including Optical and Coaxial Digital inputs, two RCA Analog inputs, and a crucial Phono MM (Moving Magnet) input, making them instantly turntable-ready. For those seeking even higher fidelity, the speakers can be upgraded with the optional WTX-MicroStream network adapter to enable Wi-Fi audio streaming via the Advance PlayStream app. Whether you're listening to digital sources or spinning vinyl, control is simple with the included remote control.

Pro-Ject Elvis Turntable

Celebrate Elvis Presley’s 90th birthday in 2025 with this exclusive, audiophile-grade turntable. Handmade in Europe, it’s the ultimate centrepiece for both vinyl lovers and Elvis fans, perfectly blending premium sound with iconic design. Key Features: Premium 9" tonearm Built-in speed control brings added convenience for easy changing between 33 and 45 RPM Built-in AC generator creates a clean power supply for the motor Heavy zero-resonance glass platter Factory-mounted Sumiko Rainier cartridge with elliptical diamond stylus Made in Europe  

Rega Carbon Pro Stylus

Please Note: This is for the STYLUS ONLY not the complete cartridge. Give your Rega Carbon cartridge an immediate, noticeable lift in performance with the Carbon Pro stylus. This is a simple, direct replacement and a significant upgrade over the standard stylus. The secret is the new Elliptical bonded stylus, which replaces the standard Carbon's conical profile. The result? You'll experience an instant boost in dynamics and detail from your records. Installation is literally a matter of seconds—no need to even remove the cartridge from the tonearm. It’s the perfect, affordable performance boost for all Planar 1, Planar 1 Plus, and Planar 2 owners using the standard Rega Carbon.

Hana Umami Black Moving Coil Cartridge

For five decades, master cartridge designer Masao Okada-san of Excel Sound has blended innovative engineering with traditional Japanese craftsmanship. His newest creation, the HANA-Umami Black, continues this legacy, delivering the "Brilliant and Gorgeous" sound the brand is known for. This isn't just a simple upgrade from the Umami Red; it's a completely new flagship cartridge. Key Features: Diamond Cantilever High-Efficiency "OKD" Moving Coil Generator High-Power Rare Earth Magnet Hybrid Carbon Armature Special Urushi Enamel Finish The cartridge body is finished with a stunning Urushi lacquer. 

Grado Prestige Gold 3 T4P Moving Magnet Cartridge

The Gold3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.   Key Features: Hand-Built in Brooklyn Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Ultra High Purity Copper Coil Four Coil Unison De-Stressed Chasis Swiss Screw Machined

Audio-Technica AT-LP70X Fully Automatic Wireless Belt-Drive Turntable

Crafted for new vinyl enthusiasts, the AT-LP70XBT Automatic Wireless Turntable is a great way to start your audio journey. It delivers the classic, warm sound of vinyl while offering the modern convenience of Bluetooth® technology. You can easily stream your records to Bluetooth speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable supports both 33-1/3 and 45 RPM records. In addition to its wireless connectivity, it features a built-in switchable phono preamp. This allows you to connect the turntable directly to a home stereo or powered speakers, regardless of whether they have a dedicated phono input.

Dynavector DV-10XA Moving Coil Cartridge

The Dynavector 10X series, a high-output Moving Coil (MC) cartridge, has been a global success since 1978, winning Design and Engineering Awards at the Chicago CES in 1978 and 1981. This iconic cartridge, with its distinctive red body, has continually evolved, incorporating a solid aluminum head block in 2003 and a "Shibata III" line contact stylus in the 10X5 MkII in 2018. Now, in 2025, the new 10XA model features a magnetic circuit with "Special Magnetic Annealing" technology, offering exceptionally smooth and articulate analog playback that exceeds expectations for an entry-level cartridge.

Ortofon MC X40 Moving Coil Cartridge

The MC X40 stands as the pinnacle of the MC X Series, crafted for the most discerning audiophiles. It features a nude Shibata diamond stylus on a rigid, lightweight boron cantilever, delivering unparalleled transparency, speed, and responsiveness to your music. Key Features: Detailed and pure sonic reproduction takes a step toward the high-end Overhead mounting cartridge for installing into a headshell Moving Coil cartridge design Nude Shibata stylus Superior boron cantilever

Ortofon MC X30 Moving Coil Cartridge

Take your listening experience to the next level with the MC X30. Featuring a nude fine line diamond stylus, it uncovers extraordinary accuracy and resolution, bringing your music to life with breathtaking detail and dynamic range on every track. Key Features: Accurate sound reproduction, delivered with greater power and space Overhead mounting cartridge for installing into a headshell Moving Coil cartridge design Nude Fine-Line diamond stylus

Ortofon MC X20 Moving Coil Cartridge

Uncover new layers in your music with the MC X20. Equipped with a nude elliptical diamond stylus, it delivers heightened depth and definition, bringing the true essence of each track to life. Prepare to rediscover your cherished records with renewed excitement and stunning precision. Key Features: Smooth sound reproduction with excellent rhythmic timing Moving Coil cartridge design Overhead mounting cartridge for installing into a headshell Nude Elliptical stylus profile

Ortofon MC X10 Moving Coil Cartridge

The MC X10 creates the perfect starting point for high-fidelity sound. Its elliptical diamond stylus brings your records to life with stunning clarity and precision, revealing every detail for an exceptional audio journey. Key Features: High price-to-performance ratio with a good all-round sound Overhead mounting cartridge for installing into a headshell Moving Coil cartridge design Elliptical stylus

Audio-Technica AT-VMN50xSH Replacement Stylus Shibata

VMN50xSH Replacement stylus for AT-VM750xSH. Key Features: Nude Shibata Tracking force 1.8 to 2.2 g (2.0 g standard)

Audio-Technica AT-VMN60xSL Replacement Stylus Special Line Contact

VMN60xSL Replacement stylus for AT-VM760xSL. Key Features: Special line contact Tracking force 1.8 to 2.2 g (2.0 g standard)

Audio-Technica AT-VMN70xSP Replacement Stylus SP Mono

VMN70xSP Replacement stylus for AT-VM670xSP. Key Features: Conical bonded (3.0 mil) Tracking force 4.5 to 5.5 g (5.0 g standard)

Audio-Technica AT-VM520xEB/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM520xEB/H combo kit features the AT-VM520xEB elliptical bonded dual moving magnet cartridge, which comes pre-mounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM520xEB is an updated model from the AT-VMx series, now featuring refined materials and design elements. These enhancements further improve the VM sound, delivering responsive playback that captures the full dynamism of musical expression. Ease of use is also enhanced with threaded inserts for simpler mounting and a V-cut stylus protector for precise stylus positioning. The 0.3 x 0.7 mil elliptical bonded stylus of the AT-VM520xEB tracks the record groove with accuracy for outstanding audio reproduction. AT-VM520xEB/H Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus 0.3 x 0.7 mil elliptical bonded stylus Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli AT-LT10 Universal Headshell Key Features Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record Mounting screws included

Audio-Technica AT-VM740xML/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM740xML/H combo kit features the AT-VM740xML microlinear dual moving magnet cartridge, which comes pre-mounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM740xML is part of the updated AT-VMx series, boasting new materials and design tweaks that enhance the VM sound. This results in highly responsive playback that's particularly adept at capturing the full dynamism of musical expression. AT-VM740xML Key Features AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils Centre shield plate between the left and right channels reduces crosstalk for clear stereo sound Die-cast aluminum housing reduces vibrations and resonance Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Aluminum tapered cantilever reduces mass near the stylus tip for quicker signal transmission Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models AT-LT10 Universal Headshell Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record

Audio-Technica AT-VM750xSH/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM750xSH/H combo kit features the AT-VM750xSH Shibata dual moving magnet cartridge, pre-mounted on the AT-LT10 universal 1/2"-mount headshell. As part of the updated AT-VMx series, the AT-VM750xSH incorporates material and design improvements that further enhance the VM sound**. This delivers responsive playback that's particularly sensitive to the dynamism of musical expression. AT-VM750xSH Key Features AT-VMx dual moving magnet cartridge with Shibata stylus Shibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortion Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminum housing reduces vibrations and resonance. Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application   AT-LT10 Universal Headshell Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record

Audio-Technica AT-VM740xML Dual Moving Magnet Stereo Cartridge

All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. The lightweight microlinear stylus of the AT-VM740xML precisely traces the record groove with incredible accuracy, delivering nuanced audio reproduction that elliptical and conical styli simply can't match. Key Features: AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Die-cast aluminum housing reduces vibrations and resonance Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Aluminum tapered cantilever reduces mass near the stylus tip for quicker signal transmission Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM745xML Dual Moving Magnet Stereo Cartridge

The new, lightweight microlinear stylus of the AT-VM745xML traces the record groove with incredible accuracy, delivering audio reproduction that elliptical and conical styli simply can't match. This nuanced reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminium pipe, leading to more accurate reproduction of dynamic musical passages. All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. Key Features: AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminium housing reduces vibrations and resonance Paratoroidal coils improve generating efficiency for enhanced channel separation,channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models

Audio-Technica AT-VM750xSH Dual Moving Magnet Stereo Cartridge

All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for greatly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. The new, lightweight Shibata stylus of the AT-VM750xSH provides greater surface contact with the record groove than an elliptical stylus. This results in the pickup of ultra-high frequencies with minimal abrasion and distortion. This nuanced audio reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminum pipe, leading to more accurate reproduction of dynamic musical passages. Key Features: AT-VMx dual moving magnet cartridge with Shibata stylus Shibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortion Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminum housing reduces vibrations and resonance. Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM760xSL Dual Moving Magnet Stereo Cartridge

The AT-VM760xSL is equipped with an ultra-lightweight special line contact stylus that traces the record groove with incredible accuracy and minimal abrasion. This nuanced audio reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminum pipe, leading to more accurate reproduction of dynamic musical passages. All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. Key Features: AT-VMx dual moving magnet cartridge with special line contact stylus Special line contact stylus traces the record groove with extreme accuracy, delivering premium high-frequency response and detailed spatial expression Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminium body reduces vibrations and resonance Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VMN10xCB Replacement Stylus Conical Bonded

VMNX10CB Replacement stylus for VM510xCB & VM610xMONO.  Key Features: Conical Bonded Stylus Bonded Round Shank Construction

Audio-Technica AT-VMN20xEB Replacement Stylus Elliptical Bonded

VMNX20CB Replacement stylus for AT-VM520xEB. Key Features: Elliptical Bonded Stylus Tracking force 1.8 to 2.2 g (2.0 g standard)

Audio-Technica AT-VMN30xEN Replacement Stylus Elliptical Nude

VMN30xEN Replacement stylus for AT-VM530xEB. Key Features: Nude elliptical Stylus Tracking force 1.8 to 2.2 g (2.0 g standard)

Audio-Technica AT-VMN40xML Replacement Stylus Microlinear with Aluminium Cantilever

VMN40xML Replacement stylus for AT-VM740xML. Key Features: Nude Microlinear Stylus Tracking force 1.8 to 2.2 g (2.0 g standard)

Audio-Technica AT-VMN45xML Replacement Stylus Microlinear with Boron Cantilever

VMN45xML Replacement stylus for AT-VM745xML. Key Features: Nude Microlinear Stylus Tracking force 1.8 to 2.2 g (2.0 g standard)

Audio-Technica AT-VM520xEB Dual Moving Magnet Stereo Cartridge

Audio-Technica's new AT-VMx series premium dual moving magnet (MM) cartridges deliver a rich, detailed, and expansive sound. Designed to closely mirror the vinyl cutting head, they feature dual magnets for exceptional channel separation and extended frequency response. The VMx series incorporates material and design upgrades for refined sound. A paratoroidal coil generator with two coils per channel and a center shield plate reduces crosstalk, while PCUHD® copper wire enhances audio reproduction. Reduced coil turns improve transient response for remarkably clear and immediate sound. Ease of use is also enhanced with threaded inserts for simpler mounting and a V-cut stylus protector for precise stylus positioning. The 0.3 x 0.7 mil elliptical bonded stylus of the AT-VM520xEB tracks the record groove with accuracy for outstanding audio reproduction. Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with accuracy for outstanding audio reproduction Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models  

Audio-Technica AT-VM530xEN Dual Moving Magnet Stereo Cartridge

Audio-Technica's new AT-VMx series premium dual moving magnet (MM) cartridges deliver a rich, detailed, and expansive sound. Designed to mirror the vinyl cutting head, they use dual magnets for exceptional channel separation and extended frequency response. The VMx series features a paratoroidal coil generator with PCUHD® copper wire and reduced coil turns, resulting in improved efficiency, reduced crosstalk, and stunningly clear, immediate audio. The AT-VM530xEN model stands out with its lightweight 0.3 x 0.7 mil elliptical nude stylus, which reduces vibration system mass for better frequency response and less distortion than a bonded stylus. For user convenience, VMx cartridges include threaded inserts for easier mounting and a V-cut stylus protector for precise stylus positioning. Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus 0.3 x 0.7 mil elliptical nude stylus tracks the record groove with accuracy for outstanding audio reproduction Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM610xMONO Dual Moving Magnet Mono Cartridge

As its name suggests, the AT-VM610xMONO is specifically designed for playing mono records. Its dual magnets are internally connected to minimise record noise and produce a highly focused "centre" sound image, something stereo cartridges can't achieve. Like all VMx cartridges, the AT-VM610xMONO features PCUHD® (Pure Copper Ultra High Drawability), which results in richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to improve transient response. This allows the cartridge to react more quickly to signal changes, delivering stunningly clean music with lifelike immediacy. The AT-VM610xMONO's 0.6 mil conical bonded stylus precisely tracks the centre of the record groove for reliable performance and excellent fidelity. Key Features: AT-VMx dual moving magnet cartridge with 0.6 mil conical bonded stylus 0.6 mil conical bonded stylus tracks the centre of the record groove for reliable performance and excellent fidelity Paratoroidal coils improve generating efficiency for enhanced transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Mono body terminating left and right channels reduces surface noise Compatible with any turntable headshell that accepts 1/2" cartridges

Audio-Technica AT-VM670xSP Dual Moving Magnet Mono Cartridge

The AT-VM670xSP cartridge is specifically engineered for playing 78 RPM monaural records. Its dual magnets are internally connected to minimise record noise and produce a highly focused "centre" sound image, a distinct advantage over stereo cartridges. Like all VMx cartridges, the AT-VM670xSP utilises PCUHD® (Pure Copper Ultra High Drawability), which contributes to richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to enhance transient response, allowing the cartridge to react more quickly to signal changes. This delivers stunningly clean music with lifelike immediacy. The stylus's 3.0 mil curvature radius makes it an excellent choice for playing 78s from various eras. Key Features: AT-VMx dual moving magnet cartridge with 3.0 mil conical bonded stylus 3.0 mil conical bonded stylus designed for playing 78 RPM records Paratoroidal coils improve generating efficiency for enhanced transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three dimensional sound reproduction with excellent transient response Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Mono body terminating left and right channels reduces surface noise Compatible with any turntable headshell that accepts 1/2" cartridges

Audio-Technica AT-VM510xCB Dual Moving Magnet Stereo Cartridge

Audio-Technica's AT-VMx series of premium dual moving magnet (MM) cartridges offers enhanced warmth and realism, creating an expansive and detailed soundstage. The AT-VM510xCB model features a 0.6 mil conical bonded stylus for reliable tracking and durability. Mounting is simplified thanks to threaded inserts on each VMx cartridge body, requiring just two screws—ideal for integrated tonearms often found on high-end turntables. Additionally, a new V-cut in the stylus's flip-up protector provides a quick visual guide for precise stylus placement when lowering it onto a record. Key Features: AT-VMx dual moving magnet cartridge with 0.6 mil conical bonded stylus Conical stylus tracks the centre of the record groove for reliable performance and durability Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series

Pro-Ject Peanuts Turntable

On October 2, 1950, Charles M. Schulz introduced the world to a new comic strip featuring an endearing, round-headed character—“Good ol’ Charlie Brown.” And with that, PEANUTS was born. In 2025, Peanuts Worldwide proudly celebrates the 75th anniversary of Schulz’s timeless creation, along with the unforgettable cast of characters that have joined the journey over the decades. Among them, none has captured hearts quite like Snoopy—the coolest beagle on Earth. As longtime fans, Pro-Ject wanted to mark this milestone with something truly special: a limited-edition turntable. The design features artwork inspired by music-themed Peanuts comic strips—a tribute to the enduring charm of the gang and the universal power of music. Key Features: Special Peanuts plinth design Belt-driven Built-in phono stage and Bluetooth transmitter Anti-resonant sub-platter design Heavy 8mm, zero-resonance blasted-glass platter Precision CNC'd heavy full chassis NO hollow spaces, NO plastic Ortofon quality OM 10 moving magnet pickup 8.6" highly precise and light aluminium tonearm Low friction, vibration free tonearm bearing One-piece tonearm design & integrated headshell Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Vibration absorbing feet

Dual Drive Belt for CS 530 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 540 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 545 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 2110 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 2115 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 2120 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 2125 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 2210 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 2215 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt & Pitch Belt for CS 505 Turntable

Original dual spare parts, Pitch belt suitable for the following models:all versions of the CS 505. Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Drive Belt suitable for following models: CS505, CS505-1, CS505-2, CS505-3, CS505-4

Dual Drive Belt & Pitch Belt for CS 506-1 (not CS 506) Turntable

Original dual spare parts, Pitch belt suitable for the following models:CS506-1 (not CS506!). Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Drive Belt suitable for following models: CS506-1

Dual Drive Belt & Pitch Belt for CS 522 Turntable

Original dual spare parts, Pitch belt suitable for the following models:CS522. Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Drive Belt suitable for following models:CS522

Dual Drive Belt for CS 440 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 450 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 455 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 455-1 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 458 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 460 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 465 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 503-1 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 503-2 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 511 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 514 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 515 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 520 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 525 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for SP 85 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for SP 120 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for ASP 138 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 410 New Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 415 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 415-1 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 415-2 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 420 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 430 New Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 431 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 435 Turntable

Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249

Dual Drive Belt for CS 505-1 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 505-2 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 505-3 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 505-4 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 506-1 (not CS 506) Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 508 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 522 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 528 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 1254 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 1256 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 1257 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 1268 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Pitch Belt for CS 505 Turntable

Original dual spare part suitable for the following models:all versions of the CS 505, CS506-1, CS522

Dual Pitch Belt for CS 506-1 Turntable

Original dual spare part suitable for the following models:all versions of the CS 505, CS506-1, CS522

Dual Pitch Belt for CS 522 Turntable

Original dual spare part suitable for the following models:all versions of the CS 505, CS506-1, CS522

Dual Drive Belt for CS 130 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Dual Drive Belt for CS 505 Turntable

Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268

Goldring Extract Stylus Cleaning Kit

Goldring, a globally respected name in analogue audio and celebrated for its precision-engineered phono cartridges and turntables, proudly presents the Extract Stylus Cleaning Kit. Designed for vinyl enthusiasts, this essential toolkit provides everything needed to keep your turntable’s stylus in flawless condition. Whether you're performing daily upkeep or conducting a more intensive clean, the EXTRACT kit ensures your stylus remains in top shape—safely and effectively. Compatible with all stylus and cartridge types, the kit includes a magnifying lens, an anti-static stylus brush, and a cleaning gel pot. These high-quality tools are housed in a beautifully handcrafted storage box, offering both protection during transport and tidy organisation when not in use. 10x magnification power magnifying lens Anti-static stylus cleaning brush Cleaning gel pot: Special formula gel is designed to remove stubborn residue, while being gentle on the stylus and without compromising the bond between the stylus and cantilever.

Michell Cusis E/H Moving Coil Cartridge

The Cusis E/H is the high-output version of our highly praised Cusis E cartridge, now making it compatible with MM phono stages. As the gateway to our moving coil cartridge range, this exceptional cartridge delivers remarkable detail and musicality, always enhancing the music without overshadowing it.

Ortofon MC 90X Moving Coil Cartridge

The Ortofon MC 90X is a premium, high-performance cartridge that elevates the quality and depth of your vinyl listening experience. Drawing from the iconic MC A90 design, it incorporates cutting-edge technologies such as the Wide Range Damping system, Replicant 100 diamond stylus, and a groundbreaking stainless-steel structure created through Selective Laser Melting. The outcome? Outstanding tracking precision, superb clarity, and an immersive sound with a rich midrange and extended frequency range. Finished in a striking blue, this limited-edition cartridge blends timeless craftsmanship with modern innovation. Key Features: Overhead-mount design for easy installation into a headshell Moving Coil (MC) cartridge configuration Premium nude Ortofon Replicant 100 diamond stylus High-quality boron cantilever State-of-the-art Selective Laser Sintering manufacturing technique

Pro-Ject A1.2 Fully Automatic Turntable

Since there founding in 1991, Pro-ject's goal has been to bring HiFi stereo music to as many people as possible. With the A1, they introduced the AUTOMAT line, combining automatic turntable technology with exceptional sound quality for easier vinyl listening. Handcrafted in Germany and assembled in the Czech Republic by skilled technicians, this reliable technology allows us to deliver Pro-Ject sound to a wider audience, offering affordable, high-quality HiFi for homes worldwide. Building on the success of the A1, Pro-ject are now enhancing the drive system for an even better experience. Key Features: EW aluminium die-cast platter Updated drive system Pre-adjusted Ortofon OM10 cartridge Built in, switchable phono preamp 8.3" black-aluminium ultra-light-mass tonearm Precise mechanics with automated start and stop Carbon fibre reinforced anti-magnetic headshell Resonance damped wooden chassis Silicon damped feet Electronically controlled playback speeds Premium semi-symmetrical Connect it E phono cable Gold plated RCA cable connectors Dust cover included  

Pro-Ject AC/DC Turntable

AC/DC, the legendary rock band, is celebrated for their electrifying sound and high-energy performances. Hailing from Australia, they became iconic with timeless rock anthems like "Back in Black," "Highway to Hell," and "Thunderstruck." Their logo stands as one of the most recognisable symbols in rock music. The bold, lightning bolt-inspired font perfectly captures the band’s raw power and energy, sparking the idea for this unique turntable design. Key Features: Special 8,6” acrylic tonearm AC/DC plinth design made of 28mm MDF LED lighting Pre-adjusted Ortofon 2M Red cartridge Heavy red 10 mm glass platter Precision acrylic sub platter Precision belt drive Semi-symmetrical phono cable included Gold plated RCA connectors Handmade in Europe    

Rega Planar 3 Turntable - Light Oak/Exact

Replacing the multi award winning What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took Rega's team of designers headed up by Roy Gandy, two years to develop the all new ‘Planar 3’ following the biggest re-design of the iconic ‘Three’ model ever seen. The ‘Planar 3’ is a completely new turntable carrying over just two components from the previous RP model.  Key Features: What Hi-Fi? Product of the year 2016, 2017, 2018, 2019, 2020, 2021 RB330 precision tonearm Exact Cartridge Double brace technology 24 V low noise, low vibration motor 12 mm float glass opti-white polished platter Supplied with clear dust cover as standard. Compatible with Rega Neo turntable power supply (sold separately) Advanced EBLT drive belt fitted as standard from March 2021 Lifetime warranty against manufacture defects

Michell Apollo Phono Stage & Muse Power Supply

For discerning audiophiles, the true allure of vinyl lies in the richness and warmth of analogue sound. To fully appreciate every detail and nuance, the right equipment is essential. While a premium turntable, tonearm, and cartridge are vital, the quality of your phono stage is what ensures the integrity of the music.  Crafted in the UK and meticulously designed by the Michell Audio team, the Apollo incorporates cutting-edge technology to deliver outstanding audio performance with any turntable and cartridge. This two-box design is engineered to minimise unwanted RF noise, as such interference is the most damaging external factor to the delicate circuits of a phono stage, ensuring pristine audio reproduction. Key Features: The inbuilt power supply circuitry works in harmony with the MUSE power supply to further refine and regulate the DC power High-Quality class A preamplifiers ensure precise signal handling Passive RIAA Circuit Class A Gain Stages Customisable loading and gain settings. MUSE uses a high-quality low noise toroidal transformer, advanced capacitance multiplier technology and very high-quality voltage regulators, to reduce ripple and noise, delivering two highly filtered and regulated DC outputs. Dual Filtration: It works in harmony with APOLLO's internal power supply for superior filtering and regulation. Noise Isolation: By housing the transformer separately in MUSE, any noise generation is isolated from the amplification circuits.

Thorens TD 1601 Turntable with TP160 Tonearm

The Thorens TD 1601 builds on everything the TD 1600 offers, adding enhanced features for improved comfort and amplifier connectivity. It retains the classic wooden plinth, two-part platter with inner belt, thick rubber mat, powerful motor control unit, arm board, and acrylic dust cover, now complemented by balanced outputs and added conveniences for easier operation. The conical springs for the sub-chassis are now mounted at the bottom rather than on the top board. Additionally, a small but strong steel thread connects the sub-chassis to a steel pin at the base, preventing any lateral movement and allowing only vertical motion.   Key Features: Stabilized sub chassis on three conical springs Polished precision belt Two part platter Adjustable belt tension Electronical controlled motor Electrical lift Contactless auto shut off Balanced (XLR) and unbalanced (RCA) output Thorens precision tonearm TP 92 9"

Thorens TD1600 Turntable with TP160 Tonearm

The Thorens TD 1600 blends the brand's classic heritage with modern 21st-century technology. While it closely resembles the iconic 160 series with its traditional wooden plinth, two-part platter with an inner belt, thick rubber mat, arm board, and acrylic dust cover, it incorporates numerous innovations under the surface. This is supplied with the Thorens TP 160 9" radial tonearm. Key Features: Stabilized sub chassis on three conical springs Precision pivot bearing tonearm TP 160 with SME headshell connector Polished precision belt Two-part machined aluminium platter Adjustable belt tension Electronical controlled motor Manual lift True balanced (XLR) and (RCA) outputs External linear power supply TPN 1600

Rega Nd7 Moving Magnet Cartridge - Rebuild

This product requires your old Rega Nd7 Moving Magnet Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ The Nd7 moving magnet cartridge represents over a decade of development, offering unparalleled performance in moving magnet technology. This innovative design features ultra-high powered Neodymium magnets, a world-first in moving magnet cartridges, delivering a unique and advanced audio experience. Key Features: Fine line nude diamond profile Aluminium cantilever Neodymium magnet Unique generator Rega 3 point mounting system Highly rigid lightweight PPS body Handmade stereo cartridge 100% recyclable packaging Available factory fitted on the Planar 6 and Planar 8 turntables Lifetime warranty against manufacture defects

Rega Nd5 Moving Magnet Cartridge - Rebuild

This product requires your old Rega Nd5 Moving Magnet Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ The replacement to the Rega Exact, the Nd5 moving magnet cartridge has been over a decade in development and offers superior performance with innovative moving magnet technology. The Nd range (patent pending) is the first in the world to utilise an ultra-high powered Neodymium magnet, enabling a truly unique design. Key Features: Perfect elliptical nude diamond profile stylus Aluminium cantilever Neodymium magnet Unique generator Rega 3 point mounting system Highly rigid lightweight PPS body Handmade stereo cartridge 100% recyclable packaging Lifetime warranty against manufacture defects

Rega Nd3 Moving Magnet Cartridge - Rebuild

This product requires your old Rega Nd3 Moving Magnet Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ The all-new Nd3 moving magnet cartridge, after 10 years of development, promises to deliver 'next level' performance in moving magnet technology. The Nd range (patent pending) is believed to be the world's first to utilise ultra-high powered Neodymium magnets, enabling the creation of this completely unique design. Key Features: Moving Magnet Cartridge Elliptical profile stylus Neodymium Magnet Unique Generator Rega 3 point mounting system Glass filled PPS body Aluminium cantilever

Pro-Ject T1 EVO BT Turntable

The T1 EVO is designed to offer authentic high-fidelity sound without breaking the bank. Featuring premium materials, a sleek design, and a vibrant, dynamic sound, its extensive development ensures that exceptional audio performance was maintained, even at such an accessible price point. Key Features: BT 5.0, aptX HD for wireless streaming NEW electronic speed change for all models NEW pre-adjusted Ortofon OM10 cartridge Anti-resonant sub-platter design Heavy 8mm, zero-resonance blasted-glass platter Precision CNC‘d heavy full chassis 8.6" highly precise and light aluminium tonearm Low friction, vibration free tonearm bearing One-piece tonearm design with integrated headshell Low-capacitance Connect it Phono E RCA cable incl. Vibration absorbing feet Elegant dustcover with adjustable hinges Available in High-Gloss Black, Satin

Pro-Ject T1 EVO Phono Turntable

The T1 EVO is designed to offer authentic high-fidelity sound without breaking the bank. Featuring premium materials, a sleek design, and a vibrant, dynamic sound, its extensive development ensures that exceptional audio performance was maintained, even at such an accessible price point. Key Features: Switchable phono preamp NEW electronic speed change for all models NEW pre-adjusted Ortofon OM10 cartridge Anti-resonant sub-platter design Heavy 8mm, zero-resonance blasted-glass platter Precision CNC‘d heavy full chassis 8.6" highly precise and light aluminium tonearm Low friction, vibration free tonearm bearing One-piece tonearm design with integrated headshell Low-capacitance Connect it Phono E RCA cable incl. Vibration absorbing feet Elegant dustcover with adjustable hinges Available in High-Gloss Black, Satin

Pro-Ject T1 EVO Turntable

The T1 EVO is designed to offer authentic high-fidelity sound without breaking the bank. Featuring premium materials, a sleek design, and a vibrant, dynamic sound, its extensive development ensures that exceptional audio performance was maintained, even at such an accessible price point. Key Features: NEW electronic speed change for all models NEW pre-adjusted Ortofon OM10 cartridge Anti-resonant sub-platter design Heavy 8mm, zero-resonance blasted-glass platter Precision CNC‘d heavy full chassis 8.6" highly precise and light aluminium tonearm Low friction, vibration free tonearm bearing One-piece tonearm design with integrated headshell Low-capacitance Connect it Phono E RCA cable incl. Vibration absorbing feet Elegant dustcover with adjustable hinges Available in High-Gloss Black, Satin  

Pro-Ject Record Puck DS

Stabilise your records with this optimised record puck, perfectly suited for Pro-Ject X-Line models and other premium turntables. The Record Puck DS ensures a secure connection between the vinyl record and turntable, enhancing stability and sound quality. Offered in two stylish finishes—painted black or polished "silver"—it complements the design of our turntables perfectly. By using weight to hold the record firmly against the platter, the Record Puck DS improves timing, sound clarity, and depth of playback. Weighing 915g, this stainless steel puck is an ideal high-mass solution for turntables with a high-quality main bearing capable of supporting the added weight. Key Features: Ensures a firm fit of the record Reduces unwanted vibrations Optimises playback of warped records Felt mat on the underside to protect the label Sound improvement for all turntables  

Pro-Ject Record Puck RS

Stabilise your records with this premium record puck, available in a luxury chrome finish. The Record Puck RS provides a secure connection between the vinyl record and turntable, enhancing overall sound quality. Available in two elegant finishes—black painted or chrome—it seamlessly complements the design of our premium turntables. By using weight to firmly press the vinyl against the platter, the Record Puck RS improves sound performance, offering greater timing precision and enhanced depth. Weighing in at 1,030g, this solid brass puck is ideal for high-end turntables like our Xtension and Signature models, ensuring optimal playback and sonic clarity. Key Features: Ensures a firm fit of the record Reduces unwanted vibrations Optimises playback of warped records Felt mat on the underside to protect the label Sound improvement for all turntables

Pro-Ject Pick it MC1 Moving Coil Cartridge

In their extensive research and development of True Balanced turntables and phono stages, Pro-Ject recognised the crucial role that Moving Coil (MC) cartridges play in achieving both sonic and mechanical excellence. Only with MC cartridges can you fully experience the technical advantages of a balanced connection, especially in terms of dynamics, soundstage, and, most notably, the quietness of the sound. However, manufacturing MC cartridges is more complex and costly compared to Moving Magnet (MM) cartridges. As part of Pro-Ject’s commitment to making high-quality HiFi stereo systems more accessible, they set out to create a more affordable MC cartridge—resulting in the Pick It MC1. The ultra-light stylus and coil assembly of an MC cartridge offer a wider frequency range and superior transient response. This translates to better detail, enhanced resolution of low-level signals, and improved overall clarity. The lower source impedance also reduces susceptibility to external interference, minimising hum. However, due to its lower output (typically around 20dB less than MM cartridges), it’s recommended to pair the MC1 with a high-quality phono stage for optimal performance. With the Pick It MC1, you’ll enjoy greater audio clarity, improved stereo imaging, and superior transparency compared to MM cartridges. The cartridge features a resonance-optimised ABS housing, weighing in at just 5 grams, and its medium compliance makes it an ideal match for most entry-level to mid-range turntables.

Pro-Ject Pick it MC2 Moving Coil Cartridge

During their in-depth research and development of True Balanced turntables and phono stages, Pro-Ject recognised the pivotal role that Moving Coil (MC) cartridges play in achieving both sonic and mechanical perfection. Only with MC cartridges can you fully take advantage of the technical benefits of a balanced connection—improving dynamics, expanding the soundstage, and, most notably, enhancing the quietness of the sound. However, the production of MC cartridges is far more intricate and costly than that of Moving Magnet (MM) cartridges. Staying true to their mission of making high-quality HiFi stereo systems more accessible, Pro-Ject introduced the Pick It MC2. The lightweight stylus and coil assembly of the MC cartridge enables a much wider frequency response and improved transient performance. This results in more detailed sound reproduction and a greater resolution of low-level signals. The lower source impedance of the MC cartridge also makes it less susceptible to external interference, resulting in reduced hum. However, because MC cartridges generally have a lower output—around 20dB less than MM cartridges—a high-quality phono stage is recommended to achieve the best performance. Fresh, Lively Sound Reproduction The new Pick It MC2 features an elliptical diamond mounted on an aluminium cantilever, delivering a richer tone and more nuanced details than the Pick It MC1. With an MC cartridge, you'll experience superior audio clarity, enhanced stereo imaging, and greater transparency compared to MM cartridges. The cartridge housing is made from resonance-optimised ABS, keeping the total weight at just 5 grams. With its medium compliance, the MC2 is a perfect match for most entry-level to mid-range turntables.  Pro-Ject also sought out the finest Japanese components for the most critical parts, including the diamond and cantilever. By combining these with an affordable, high-performance motor, all housed in a specially designed, resonance-free cabinet, the Pick It MC2 offers exceptional sound at an attractive price point.

Pro-Ject Lead it C

Upgraded headhsell cables for your SME headhsell. Pro-ject Lead it C headshell leads are made from high-purity copper, making it an ideal upgrade for enhancing the performance of your headhsell cabling. Copper is chosen for its exceptional conductivity and superior signal quality. The cable's cartridge tags feature advanced spring technology in the connectors, ensuring a secure and reliable connection to the cartridge pins for optimal signal transfer. Additionally, the use of gold-plated beryllium copper in the cartridge tags provides multiple benefits, including outstanding conductivity, enhanced signal integrity, and improved durability.

Pro-Ject Lead it Premium

Upgraded headhsell cables for your SME headhsell. The Headhsell cable, crafted from high-purity silver, is the perfect upgrade to enhance the cabling of your headshell. Silver’s superior conductivity makes it the ideal choice for transmitting signals, and its interaction with impedance helps deliver a more accurate and faithful reproduction of the source material. Additionally, the cartridge tags are engineered with advanced spring technology in the connectors, ensuring a secure and stable connection to the cartridge pins for optimal signal transfer. The use of gold-plated beryllium copper in the cartridge tags further improves the cable's performance, offering exceptional conductivity, enhanced signal integrity, and increased durability.

Pro-Ject Pin It (Set of 8)

The Pro-Ject Pin It utilises a precise spring technology in the connector to provide secure fastening to the cartridge pins, ensuring improved transfer of signal from the cartridge. Furthermore, the use of gold-plated beryllium copper in the cartridge tags, offering several advantages including excellent conductivity, improved signal integrity, and improved durability.

Pro-Ject Pick it MM EVO Moving Magnet Cartridge

The Pick It MM EVO cartridge from Pro-Ject Audio Systems is a high-performance model designed to deliver exceptional sound quality with a powerful 7mV output. Expertly developed by Ortofon’s phono cartridge specialists and finely tuned by Pro-Ject's design team, it offers an outstanding listening experience. Equipped with a precision elliptical stylus, the Pick It MM EVO enhances sound reproduction, creating a wide, immersive soundstage. Built on a robust cantilever—commonly found in DJ cartridges—it offers not only superior sound but also remarkable durability, ensuring long-lasting performance. Incorporating Ortofon’s acclaimed split pole pins, the cartridge achieves a flat frequency response that rivals the performance of moving coil (MC) cartridges, providing exceptional musical fidelity across the entire frequency range. Key Features: All-purpose cartridge that delivers an open, dynamic sound Overhead mounting cartridge for installing into a headshell Utilises Ortofon's split-pole pin technology to reduce the eddy current and to get a flat frequency response, like with an MC cartridge Elliptical diamond stylus Made by the experts at Ortofon A/S

Pro-Ject 6PerspeX Balanced UK SuperPack

The 6PerspeX Balanced is a high-end turntable that seamlessly combines luxurious components with advanced technology to deliver an exceptionally detailed, noise-free sound. Featuring a sophisticated magnetically-isolated sub-chassis atop a clear acrylic plinth, it stands out as both a visually stunning and distinctive model within the Pro-Ject lineup. Key Features: Luxury acrylic plinth is both striking in looks and functional with its improved resonance characteristics Isolating coned feet Fully decoupled motor stands in its own heavy base for reduced resonance transfer Built-in speed control brings added convenience for easy changing between 33 and 45 RPM Dust cover included Made in Europe

Pro-Ject Debut Pro S Balanced

The Pro-Ject Debut PRO S Balanced takes the highly regarded PRO series of turntables to new heights, blending exceptional craftsmanship with a refined, hands-on approach to music listening. True to Pro-Ject's philosophy, this turntable is designed to foster a deeper, more mindful connection with your vinyl collection. The Debut PRO S Balanced enhances this experience by offering manual controls that encourage interaction, amplifying the joy and satisfaction of playing records. Key features include: Motor Suspension System Built-in Speed Control Precision Machined MDF Plinth Aluminium Die-Cast Platter S-Shape" Tonearm ensures improved tracking and reduced distortion. Factory-Mounted Pro-Ject Pick It S2 C Cartridge With the Debut PRO S Balanced, Pro-Ject continues to offer a turntable that prioritises both performance and the tactile pleasure of listening to vinyl.

Pro-Ject Record Puck S

Stabilise your records with this optimised record puck, perfectly suited for Debut, RPM 1 and X-Line models. The Record Puck S ensures a secure and stable connection between your vinyl record and the turntable platter. Available in two finishes—black painted or polished "silver"—it complements the design of our turntables seamlessly. By using weight to press the record firmly onto the platter, the Record Puck S enhances sound performance, improving both timing and depth. Weighing 315g, this solid aluminium puck is ideal for smaller turntables. Its lighter weight, compared to our DS and RS-level pucks, reduces stress on the turntable bearing, helping to minimise the risk of rumble and preserving optimal sound clarity. Key Features: Ensures a firm fit of the record Reduces unwanted vibrations Optimises playback of warped records Felt mat on the underside to protect the label Sound improvement for all turntables

Pro-Ject VC-S Self-Adhesive Strip - Grey

Replacement self adhesive strip (quanity of one single strip, as you no longer need two due to design changes) for the Pro-Ject VC-S vacuum arm. This strip creates a soft buffer between the metal vacuum arm and the vinyl record.   This strip should be replaced at regular intervals, in order to protect your records.   The Grey Strip - for VC-S MK II, but compatible with all models (thicker)

Ortofon SPU GTX E Moving Coil Cartridge

The Ortofon SPU GTX E cartridge offers the perfect fusion of classic musicality and cutting-edge audio technology. Building on the legacy of Ortofon’s renowned SPU series, it combines the signature warmth and rich tonal character with modern advancements for an unparalleled listening experience.  Featuring a newly designed elliptical stylus, the SPU GTX E delivers enhanced precision and detail. The elliptical shape, with its narrower front radius and wider side radius, increases the contact area with the groove walls, improving tracking and delivering superior fidelity. With its blend of vintage charm and modern engineering, the SPU GTX E brings exceptional clarity and depth to your music. Its built-in MC step-up transformer ensures high-output, low-noise performance, eliminating the need for additional amplification. Key Features: Glass-Fibre Reinforced Co-Polymer Cartridge Housing Built-in transformer allows you to connect the cartridge to an MM input Moving Coil cartridge design Elliptical diamond stylus  

Ortofon SPU GTX S Moving Coil Cartridge

The SPU GTX S delivers the best of both worlds, blending the musicality and rich tonal character that have defined Ortofon’s SPU series for decades with the latest innovations in audio technology. Rediscover the rich, vintage warmth of vinyl with the Ortofon SPU GTX S, featuring a spherical stylus. The spherical stylus is the most common stylus shape and has a rounded tip that contacts the groove walls of the record, offering a balanced, smooth sound.  The built-in MC step-up transformer provides high-output, low-noise performance, preserving the classic SPU audio fidelity. Key Features: Glass-Fibre Reinforced Co-Polymer Cartridge Housing Built-in transformer allows you to connect the cartridge to an MM input Moving Coil cartridge design Spherical diamond stylus

Rega Planar 3 RS Turntable

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation. The Rega Planar 3 RS Edition (Rega Special) features a newly designed aluminium metal skin HPL laminate plinth, delivering the stiffest, most rigid platform ever created at the Planar 3 level. The sleek, dark brushed metallic finish, complemented by a high-gloss black edge, creates an eye-catching foundation for the iconic Planar 3. Included with the RS Edition is a custom-matched Neo MK2 PSU, with each motor's vibration circuit individually tuned for optimal performance. The low-noise 24V motor powers the sub-platter via Rega's Reference EBLT drive belt, ensuring unparalleled speed accuracy. To complete the setup, the legendary handmade RB330 tonearm is paired with the all-new, award-winning Nd5 moving magnet cartridge for an exceptional listening experience. Key Features: Brushed metal dark aluminium HPL laminated plinth RB330 Precision tonearm Nd5 MM cartridge factory fitted Neo turntable PSU MK2 included (speed control + anti vibration circuit) 24 V low noise, low vibration motor, hand tuned to the custom Neo PSU Mk2 CNC machined custom pulley Reference EBLT drive belt fitted as standard Double brace technology 12 mm float glass opti-white polished platter Supplied with a smoked dust cover as standard

Pro-Ject Stereo Set E1

The Stereo Set E1 is an affordable choice for music lovers who value both style and outstanding sound quality. This set includes three well-respected audio components, the E1 Turntable, Stereo Box E & Speaker Box 5E carefully paired to deliver an exceptional listening experience. Available in two sophisticated colour finishes, it effortlessly complements any space. E1 Turntable Key Features: Anti-resonant ABS polymer main platter Pre-Set 8.6" tonearm Aluminium tonearm tube Stereo Box E Key Features:   Remote control included Compact and stylish build Wireless Bluetooth streaming input Built-in Moving Magnet (MM) phono stage for direct turntable connection Connect headphones via mini-jack input Speaker Box 5E Key Features: Includes removable speaker grille High-excursion carbon fibre cone woofer Bass-Reflex speaker cabinet via rear-firing port for clean and controlled bass

Michell LEVIS Magnetic Levitation Feet

LEVIS feet use opposing magnets to support your turntable, allowing it to float on a cushion of air. This innovative design adds an extra layer of structural isolation between your turntable's sensitive components and the surface it rests on. Structural vibrations can be caused by dynamic forces from loudspeakers, foot traffic, nearby traffic, electrical transformers, and even turntable motors. Even the smallest vibrations can transfer to your turntable and impact its performance. LEVIS feet effectively eliminate these vibrations before they become an issue. When designing a magnetic levitation device, it's crucial to control the levitation mechanism and ensure the assembly remains intact. After exploring existing solutions, we decided on a fully enclosed design with minimal contact points. In operation, each foot features only three tiny, unloaded contact points—almost pinpoints—made from high-rigidity, low-mass polymer. These contact points do not bear weight and are isolated from the metal components by a polymer housing and spring. Their sole purpose is to prevent metal parts from touching, resulting in an exceptionally low level of contact and maximising contact-free support. LEVIS feet are sold in sets of three and come in two weight ranges: LEVIS (for full-size turntables with hinged lids, 13kg-30kg) LEVIS SE (for SE model turntables, 9.5kg-14kg)

Pro-Ject VC-E2 7" Records Cleaning Set

A dedicated clamp and vacuum arm, along with cleaning fluid is perfect for reconditioning your 7” classics designed for the VC-E2 cleaning machine. The standard record clamp and vacuum arm on the VC-E2 cleaning machine are designed for 12 inch records only, this specially designed 7” kit allows you to attach 7” singles. The Pro-Ject 7” VC-E2 kit contains a record clamp to fit your 7” record, a vacuum arm to brush/wash the record and 100ml of cleaning fluid.

Hana SL MKII Moving Coil Cartridge - Exchange

This product requires your old Hana SL MKII Moving Coil Cartridge to be sent to us for exchange. Please send your cartridge with your order web reference to: HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Hana SH MKII Moving Coil Cartridge - Exchange

This product requires your old Hana SH MKII Moving Coil Cartridge to be sent to us for exchange. Please send your cartridge with your order web reference to: HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Hana SLM Mono MKII Moving Coil Cartridge - Exchange

This product requires your old Hana SLM Mono MKII Moving Coil Cartridge to be sent to us for exchange. Please send your cartridge with your order web reference to: HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Hana SL MK II Moving Coil Cartridge

The SL MK II features enhancements designed to improve musical performance while delivering exceptional value within the S Series price range. A newly designed tapered aluminium cantilever with increased rigidity significantly boosts the transfer of groove modulation from vinyl records to the cartridge generator. The S Series Mk II includes many high-spec components, advanced materials, and innovative technical processes inspired by Hana’s premium elite cartridge models, contributing to their renowned “brilliant and gorgeous” sound. Key Features - New MKII:  A new tapered aluminium cantilever with increased rigidity and effective mass reduction at the nude diamond Shibata stylus tip.  Non-resonant body shape, modelled after the Hana M series. Damped with a matte soft feel black elastomeric resin paint. Brass top to body for resonance reduction. Internally threaded cartridge mounting.  Essential components such as the yoke, pole pieces, and gold terminal pins undergo cryogenic treatment to enhance sound quality. The non-resonant body shape, inspired by the Hana M Series, is coated with a matte Soft Feel Black elastomeric resin and features a brass top cap with integrated threaded mounting for the cartridge. The heavier Mk II cartridge ensures better coupling, enhancing bass and dynamics while expanding compatibility across a wider range of tonearms. The SL MK II generator, also found in the Umami Blue and ML models, utilises an Alnico magnet and cross-coil design. It employs high-purity 30-micron copper wire with an 8Ω impedance, resulting in improved signal-to-noise ratio and reduced moving mass. These refined design features provide greater resolution and accuracy, optimising performance for a wider array of phono stages.

Hana SH MKII Moving Coil Cartridge

The heavier S Series Mk II offers better tone-arm coupling, with expanded compatibility to a wider range of tone-arms. The high output SH MK II MC cartridge has upgrades to enhance both the musical performance, and also to offer greater value at the S Series price point. Featuring a new tapered aluminium cantilever with increased rigidity, it significantly improves the transfer of groove modulation from vinyl to the cartridge generator. The S Series Mk II is equipped with higher-quality components, advanced materials, and innovative technical processes drawn from Hana's more premium elite cartridge models, enhancing the brand's signature "brilliant and gorgeous" sound. Key Features - New MKII:  A new tapered aluminium cantilever with increased rigidity and effective mass reduction at the nude diamond Shibata stylus tip.  Non-resonant body shape, modelled after the Hana M series. Damped with a matte soft feel black elastomeric resin paint. Brass top to body for resonance reduction. Internally threaded cartridge mounting.  Key components like the yoke, pole pieces, and gold terminal pins undergo cryogenic treatment to achieve a more natural audio experience. The redesigned non-resonant body, inspired by the Hana M Series, is coated with a matte Soft Feel Black elastomeric resin and equipped with a brass top cap and integrated threaded cartridge mounting. The heavier Mk II offers better coupling, leading to improved bass and overall dynamics, along with expanded compatibility with a wider variety of tonearms. The SL MK II generator, found in the Umami Blue and ML models, incorporates an Alnico magnet and cross-coil design. It utilises high-purity 30-micron copper wire with an 8Ω impedance, resulting in enhanced signal-to-noise ratio and reduced moving mass. These refined design elements provide greater resolution and precision, optimising performance across a broader range of phono stages.

Hana SLM Mono MKII Moving Coil Cartridge

The new mono SLM MK II low output MC cartridge features upgrades that enhance musical performance while providing greater value within the S Series price range. It includes a new tapered aluminum cantilever with increased rigidity, significantly improving the transfer of groove modulation from vinyl records to the cartridge generator. The S Series Mk II showcases many higher-spec components, advanced materials, and innovative technical processes sourced from Hana's premium cartridge models. Key parts such as the yoke, pole pieces, and gold terminal pins undergo cryogenic treatment to achieve a more natural sound. The design benefits from an enhanced non-resonant body shape, inspired by the Hana M Series, which is damped with a matte soft-feel black elastomeric resin paint and includes a brass top cap along with integral threaded mounting for the cartridge.  The heavier Mk II cartridge improves coupling, enhancing bass and dynamics, while also offering broader compatibility with a variety of tonearms. The SLM MK II generator takes cues from the Umami Blue and M Series designs, utilising an Alnico magnet and a cross-coil setup made with high-purity 30-micron copper wire and a 23Ω impedance. These design enhancements deliver higher resolution and traceability, optimising performance when paired with MM phono stages.

Audio-Technica AT-LT10 Universal Headshell

The AT-LT10 is a versatile ½"-mount headshell designed for 4-pin turntable cartridges, whether they have threaded inserts or not. Its elongated through holes enable precise cartridge positioning to ensure correct overhang and optimal tonearm length. Crafted from lightweight aluminum die-cast, the body effectively minimises vibrations, while the slip-resistant finger lift allows for precise stylus placement. The AT-LT10 features OFC (oxygen-free copper) lead wires and includes mounting screws, catering to professional needs. Key Features Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record Includes mounting screws

Audio-Technica ATN3600LE Elliptical Stylus

Introducing the ATN3600LE stylus: Upgrade your AT-LP60X series turntable with this elliptical bonded stylus, enhancing sound quality over the ATN3600L conical stylus. Modelled after the trusted ATN3600L, the ATN3600LE features a 0.3 x 0.7 elliptical stylus, combining reliability with improved audio performance. The ATN3600LE styli is compatible with the following Audio-Technica Turntables: AT-LP60X seriesAT-LP60 series AT-SB727and AT-SB2022

Pro-Ject VC-S Self Adhesive Strips for 7" Kit - Grey

Replacement self-adhesive strip for the Pro-Ject VC-S vacuum arm. This strip serves as a soft buffer between the metal vacuum arm and your vinyl records, and should be replaced regularly to ensure record protection. This is designed for the VC-S MK II, but compatible with all models (thicker).

Pro-Ject Sweep it E Replacement Brush

Audio-Technica ATN3600LC Stylus

The ATN3600L conical bonded stylus has been updated with a modern design and will be re-released as the ATN3600LC. It retains the same ease of use, quality, and sound performance, with a stylus that ensures proper contact even if the cartridge is slightly tilted. Compatible with the AT3600L, it offers a seamless cartridge replacement. The ATN3600LC styli is compatible with the following cartridges: AT3600AT3600LAT3601AT3651AT3650LAT3650CAT3650AT3626

Pro-Ject Debut EVO 2 Turntable

The Debut EVO 2 prioritises essential elements for exceptional sound, featuring precise engineering, expert craftsmanship, and handmade quality from the EU. Built for lifelong durability. New for the Pro-ject Debut EVO 2 Turntable: Special Platter - The heavy aluminum platter features a TPE ring for damping and anti-magnetic properties, minimising unwanted resonances. Bearing Block- A precision CNC-milled aluminum tonearm bearing block effectively absorbs resonances from the cartridge. Pick it MM EVO - The new cartridge delivers lively and robust sound for the Debut EVO 2. Counterweight - A TPE damping ring enhances the counterweight, similar to Pro-Ject’s high-end models. Key Features: 8.6" one-piece conical carbon tonearm Motor suspension with better damping Height-adjustable metal feet Electronic speed switch Precision belt drive with electronic speed control 8x hand-painted MDF chassis Premium semi-symmetrical phono cable Gold plated RCA connectors Dust cover included Handmade in Europe

Dynavector 20X2A Moving Coil Cartridge

The DV 20X2A is the base model in the Dynavector MC cartridge series, sharing the same core design as the higher-end XX-2A and Te Kaitora Rua models. It features a solid aluminum alloy body, hard aluminum cantilever, and Micro-Ridge stylus tip. You can choose between two types: the 20X2A-L (low output) for standard MC setups, or the 20X2A-H (high output) for most MM inputs. It's perfect for those who want the MC cartridge experience without needing an MC step-up transformer. High & Low Output Versions The 20X2A-H delivers a 2.8mV output thanks to Dynavector's renowned coil winding tech, making it compatible with MM inputs on your PHONO terminal without needing a head amp or step-up transformer. The 20X2A-L, with a 0.3mV output, uses the same high-quality PCOCC wires and works well with head amps and MC step-up transformers that have a load impedance of 30Ω or more. Special Annealing Magnetic Circuit The core of the MC cartridge, the magnetic circuit, is made from pure iron with stable, low-distortion magnetic properties. By fine-tuning the annealing process—adjusting temperature, environment, and heating/cooling times—we’ve achieved rich, resonant sound with exceptional clarity and minimal distortion. Neodymium magnets and soft magnets This series uses patented softened magnets to minimise distortion and harshness typically caused by rare earth magnets, while still delivering high output through powerful neodymium magnets. By harnessing neodymium's strong magnetic force, the cartridge ensures clear sound separation. Micro-Ridge Stylus The stylus tip features a Micro-Ridge design with a contact radius of just 2 microns. Its band-like shape makes it highly resistant to wear, ensuring optimal performance for an extended period. Compliance The 20X2A series, with a compliance of 12mm/N and a weight of 9.2g, works well with most light to medium-weight tonearms (lighter headshells are recommended). 

Pro-Ject Debut PRO B Turntable

The Debut PRO B is a genuine audiophile-grade turntable that combines advanced technologies with elegant design. Equipped with a premium Pick it PRO Balanced moving magnet cartridge and a high-quality MiniXLR connector, this turntable is True Balanced-ready, allowing users to enhance their system's performance to an even higher level. Key Features: Pre-adjusted Pick it PRO balanced MM Cartridge Mini-XLR balanced phono output 8.6" one-piece carbon-aluminium tonearm Aluminium platter with TPE damping Connect it Phono E RCA included Compatible with the optional Power Box S3 Phono Power Supply   

Rega Nd7 Moving Magnet Cartridge

The Nd7 moving magnet cartridge represents over a decade of development, offering unparalleled performance in moving magnet technology. This innovative design features ultra-high powered Neodymium magnets, a world-first in moving magnet cartridges, delivering a unique and advanced audio experience. Key Features: Fine line nude diamond profile Aluminium cantilever Neodymium magnet Unique generator Rega 3 point mounting system Highly rigid lightweight PPS body Handmade stereo cartridge 100% recyclable packaging Available factory fitted on the Planar 6 and Planar 8 turntables Lifetime warranty against manufacture defects

Pro-Ject VC-E MkII 7" Records Cleaning Set

A dedicated clamp and vacuum arm, along with cleaning fluid is perfect for reconditioning your 7” classics designed for use with the VC-E machine.  Note that this arm and kit is NOT compatible with the newer VC-E2 model of vinyl cleaner. The standard screw record clamp and vacuum arm on the VC-E Alu cleaning machines are designed for 12 inch records only, this specially designed 7” kit allows you to attach 7” singles.  This Pro-Ject kit contains a record clamp to fit your 7” record, a vacuum arm to brush/wash the record and 100ml of cleaning fluid.

KEF Kube12 MIE Subwoofer

The Kube 12 MIE is engineered to produce deep, powerful bass, enhancing the immersive experience for music and movies alike. Boasting a 12-inch driver and a 300 Watts Class D amplifier, its Music Integrity Engine ensures exceptional depth and dynamic performance. Key Features: 12-inch front-firing active subwoofer 300W Class D RMS amplifier Effortless wireless integration with the optional KW1 KEF SmartConnect, LFE and speaker level inputs 3 room position EQ options Multiple power modes with "Auto wake up", "Always on", "12v Trigger"

KEF Kube15 MIE Subwoofer

The Kube 15 MIE, the flagship model in the Kube series, is designed to deliver unparalleled bass performance for music and movies, ensuring an immersive experience that resonates deeply. Tailored for larger spaces, its 15-inch driver and 300W (RMS) Class D amplifier work in harmony to produce a powerful, dynamic bass output. Enhanced by Music Integrity Engine¨ technology, the Kube 15 MIE optimises depth and fidelity, delivering exceptional audio performance. Key Features: 15-inch front-firing active subwoofer 300W Class D RMS amplifier Effortless wireless integration with the optional KW1 KEF SmartConnect, LFE and speaker level inputs 3 room position EQ options Multiple power modes with "Auto wake up", "Always on", "12v Trigger"

KEF Kube10 MIE Subwoofer

The Kube 10 MIE boasts a sealed cabinet housing a 10-inch bass driver and 300 Watts of power, ensuring exceptional bass extension and precise control. Enhanced by Music Integrity Engine technology, it dynamically enriches bass depth and dynamics, maximising its performance capability. Key Features: 10-inch front-firing active subwoofer 300W Class D RMS amplifier Effortless wireless integration with the optional KW1 KEF SmartConnect, LFE and speaker level inputs 3 room position EQ options Multiple power modes with "Auto wake up", "Always on", "12v Trigger"

Rega Nd5 Moving Magnet Cartridge

The replacement to the Rega Exact, the Nd5 moving magnet cartridge has been over a decade in development and offers superior performance with innovative moving magnet technology. The Nd range (patent pending) is the first in the world to utilise an ultra-high powered Neodymium magnet, enabling a truly unique design. Key Features: Perfect elliptical nude diamond profile stylus Aluminium cantilever Neodymium magnet Unique generator Rega 3 point mounting system Highly rigid lightweight PPS body Handmade stereo cartridge 100% recyclable packaging Lifetime warranty against manufacture defects

Rega Planar 2 Turntable

The Planar 2 was developed over two years alongside the latest Planar 3. Featuring the RB220 tonearm, a new 24 V, low noise motor, acrylic high gloss laminated plinth, newly designed central bearing and so much more. Every feature of this innovative new turntable is designed to extract the maximum amount of information and detail from your vinyl collection. Key Features: RB220 precision tonearm Rega Carbon cartridge factory fitted 24 V low noise, low vibration motor 10 mm float glass opti-white platter Supplied with clear dust cover as standard Lifetime warranty against manufacture defects

Ortofon Concorde Music Black LVB Stylus

The Stylus Concorde Music Black LVB 250, the pinnacle of the series, features a Nude Shibata stylus on a Boron cantilever. Serving as an upgrade from the Concorde Music Black and compatible with all Concorde Music cartridge models, it enables a seamless transition from the Concorde Music Red directly to the Concorde Music Black LVB 250. Developed by music lovers for music lovers, Concorde Music cartridges combine premium performance with iconic design. They reflect a dedication to the profound impact of music on our lives, transforming every listening session into a captivating journey.

Ortofon Concorde Music Black LVB Moving Magnet Cartridge

Experience unrivaled accuracy and fidelity with the Concorde Music Black LVB 250. The Concorde Music Black LVB 250 features a Nude Shibata stylus on a Boron cantilever making it the most premium Ortofon Moving Magnet cartridge on the market.  Key Features: All-purpose cartridge that delivers an open, dynamic sound Concorde cartridge for direct-mounting into SME-style tonearms Nude Shibata diamond stylus Superior boron cantilever

Ortofon Concorde Music Black Stylus

The Stylus Concorde Music Black features a Nude Shibata stylus on an Aluminum cantilever, offering an upgrade from the Concorde Music Bronze and serving as an replacement stylus for all Concorde Music cartridge models. Developed by music lovers for music lovers, Concorde Music cartridges combine premium performance with iconic design. They reflect a dedication to the profound impact of music on our lives, transforming every listening session into a captivating journey.

Ortofon Concorde Music Black Moving Magnet Cartridge

Experience transparent and articulate sound quality with the Concorde Music Black. Featuring a Nude Shibata stylus on an Aluminum cantilever, it offers an upgrade from the Concorde Music Bronze. Additionally, it can be further enhanced with the Stylus Concorde Music Black LVB 250. Key Features: All-purpose cartridge that delivers an open, dynamic sound Concorde cartridge for direct-mounting into SME-style tonearms Nude Shibata diamond stylus

Ortofon Concorde Music Bronze Stylus

The Concorde Music Bronze stylus features a Nude Fine Line stylus on an Aluminum cantilever, providing an upgrade from the Concorde Music Blue. It serves as a compatible replacement for all Concorde Music cartridge models. Developed by music lovers for music lovers, Concorde Music cartridges combine premium performance with iconic design. They reflect a dedication to the profound impact of music on our lives, transforming every listening session into a captivating journey.

Michell GyroDec Suspension Springs and Adjuster Kit

Upgrade kit for original specification GyroDecs with single-piece steel suspension pillars, This kit now includes rubber-coated suspension springs. This upgrade simplifies adjusting the chassis height and spring position, enabling you to perfectly set up your turntable. With the turntable now effectively supported on three pin points, performance is also enhanced. Unlike the original design, the suspension pillar consists of three parts: a suspension spindle, thrust ball, and hollow pillar. The spindle is fixed to the base of the turntable, with the thrust ball at its top. The hollow pillar encases this assembly and supports the spring, which in turn holds the chassis. This configuration provides a three-position, high-pressure, point contact suspension system, minimising structural vibrations from reaching the sensitive components of the turntable.

Ortofon Concorde Music Bronze Moving Magnet Cartridge

The Concorde Music Bronze features a Nude Fine Line stylus on an Aluminum cantilever, providing an upgrade from the Concorde Music Blue. Seamlessly upgrade throughout the series, from your Concorde Music Bronze to the Concorde Music Black LVB 250, simply by replacing the stylus. Experience insightful, high-resolution sound reproduction! Key Features: All-purpose cartridge that delivers an open, dynamic sound Concorde cartridge for direct-mounting into SME-style tonearms Nude Fine-Line diamond stylus

Ortofon Concorde Music Blue Stylus

The Concorde Music Blue stylus features a Nude Elliptical diamond on an Aluminum cantilever, offering an upgrade from the Concorde Music Red. It is compatible with all Concorde Music cartridge models, making it a versatile replacement option. Developed by music lovers for music lovers, Concorde Music cartridges combine premium performance with iconic design. They reflect a dedication to the profound impact of music on our lives, transforming every listening session into a captivating journey.

Ortofon Concorde Music Blue Moving Magnet Cartridge

Experience exceptional sound quality with the Concorde Music Blue, featuring a Nude Elliptical stylus on an Aluminum cantilever. This model is an upgrade from the Concorde Music Red, providing enhanced audio performance. Enjoy seamless transitions across the series—from the Concorde Music Blue to the Concorde Music Black LVB 250—by easily replacing the stylus. Key Features: All-purpose cartridge that delivers an open, dynamic sound Concorde cartridge for direct-mounting into SME-style tonearms Nude Elliptical diamond stylus profile

Ortofon Concorde Music Red Stylus

The Stylus Concorde Music Red, featuring an elliptical stylus on an aluminum cantilever, serves as a replacement stylus for all Concorde Music cartridge models. Designed by music lovers for music lovers, Concorde Music cartridges combine premium performance with iconic design. More than just cartridges, they represent a dedication to the profound impact of music, transforming every listening session into a captivating journey.

Ortofon Concorde Music Red Moving Magnet Cartridge

Enjoy balanced and dynamic sound with the Concorde Music Red. Featuring an elliptical stylus on an aluminum cantilever, it can be upgraded to the Concorde Music Black LVB 250 by simply replacing the stylus. Key Features: All-purpose cartridge that delivers an open, dynamic sound Concorde cartridge for direct-mounting into SME-style tonearms Tipped Elliptical diamond stylus profile

Rega Nd3 Moving Magnet Cartridge

The all-new Nd3 moving magnet cartridge, after 10 years of development, promises to deliver 'next level' performance in moving magnet technology. The Nd range (patent pending) is believed to be the world's first to utilise ultra-high powered Neodymium magnets, enabling the creation of this completely unique design. Key Features: Moving Magnet Cartridge Elliptical profile stylus Neodymium Magnet Unique Generator Rega 3 point mounting system Glass filled PPS body Aluminium cantilever

Pro-Ject T2 Super Phono Turntable

The Pro-Ject T2 Super Phono stands as a comprehensive turntable handmade in Europe, featuring a meticulously crafted aluminum tonearm complemented by a pre-mounted Sumiko Rainier cartridge and a substantial glass platter. The T2 sensibly enhances Pro-jects critically acclaimed T1 formula, introducing many new audiophile features, setting new standards in its new price-range. The T2 Super Phono adds a Switchable high-quality dual-stage split-passive MM phono preamp.  Key Features: Switchable high-quality dual-stage split-passive MM phono preamp taken from the acclaimed T2 W 9" highly precise and light aluminium tonearm Spring based anti-skating system Counterweight with nickel finish Pre-adjusted Sumiko Rainier (MSRP £159) 10mm, 1.7kg zero-resonance glass platter Speed control with electronic speed switch One-piece tonearm with integrated headshell Belt-driven No hollow spaces for optimal sonic performance Vibration absorbing feet Semi-symmetrical phono cable with metal connectors Acrylic dustcover with adjustable hinges

Pro-Ject T2 Turntable

The Pro-Ject T2 stands as a comprehensive turntable handmade in Europe, featuring a meticulously crafted aluminum tonearm complemented by a pre-mounted Sumiko Rainier cartridge and a substantial glass platter. The T2 sensibly enhances our critically acclaimed T1 formula, introducing many new audiophile features, setting new standards in its new price-range Key Features: 9" highly precise and light aluminium tonearm Spring based anti-skating system Counterweight with nickel finish Pre-adjusted Sumiko Rainier (MSRP £159) 10mm, 1.7kg zero-resonance glass platter Speed control with electronic speed switch One-piece tonearm with integrated headshell Belt-driven No hollow spaces for optimal sonic performance Vibration absorbing feet Semi-symmetrical phono cable with metal connectors Acrylic dustcover with adjustable hinges

Rega White Turntable Mat for PL10/RP1

Replacement White Turntable Mat for Rega PL10/RP1

Dynavector XX-2A Moving Coil Cartridge

The XX-2A is Dynavectors latest low output moving coil cartridge which features a flux damper and alnico magnet. The sound quality of the Dynavector XX-2A cartridge has been drastically improved with the development of a new ideal magnetic circuit. The result is top-notch resolution without distortion, smooth wide-range expression, and great spaciousness in the sound field. Experience the more natural and dynamic sound created by an excellent vibration system and an optimum magnetic circuit, and enjoy true harmony with the XX-2A MC cartridge. Key Features: Alnico magnet and Flux Damping High Rigidity Magnetic Circuit Low-Output MC Cartridge Solid Boron Cantilever

Pro-Ject Record Clamp - Customer Return

Please Note: This listing is for a customer return meaning that the product has been opened and used and maybe some small cosmetic imperfections. This record clamp uses a screw-thread on the spindle of a compliant turntable to fasten itself, and solidly hold the playing vinyl in place. The use of a clamp allows for a great reduction in any resonance or 'slip' associated with an ill-fitting record. Clamps are often preferred to pucks, as they use less weight to achieve the same goal.

Pro-Ject Juke Box E1 Turntable & Speaker Set

Experience the ultimate convenience while enjoying your vinyl collection by creating your listening system around the Juke Box E1. This turntable comes with a built-in 50W per-channel integrated amplifier, allowing you to simply add speakers for an exceptional stereo playback experience. If you're unsure about which speakers to choose, we can help you with that too. Key Features: Built-in speed control brings added convenience for easy changing between 33 and 45 RPM Pre-Set 8.6" tonearm Factory-mounted Ortofon OM 5E cartridge with elliptical diamond stylus Isolating non-slip turntable feet Built-in Bluetooth receiver and additional Line Level input for traditional sources 50W per-channel Class D integrated amplifier built-in

Pro-Ject Juke Box E1 Turntable

Enter a whole world of convenient audio enjoyment with our latest promotion! For a limited time you can receive a free WiiM Mini with each purchase of a Juke Box E1 turntable. The Juke Box E1 combines all of the necessary electronics within its chassis, so you can spin your beloved vinyl records by just adding your favourite passive speakers.  Experience the ultimate convenience while enjoying your vinyl collection by creating your listening system around the Juke Box E1. This turntable comes with a built-in 50W per-channel integrated amplifier, allowing you to simply add speakers for an exceptional stereo playback experience. If you're unsure about which speakers to choose, we can help you with that too. Key Features: Built-in speed control brings added convenience for easy changing between 33 and 45 RPM Pre-Set 8.6" tonearm Factory-mounted Ortofon OM 5E cartridge with elliptical diamond stylus Isolating non-slip turntable feet Built-in Bluetooth receiver and additional Line Level input for traditional sources 50W per-channel Class D integrated amplifier built-in

Dual CS 529 Fully Automatic Bluetooth Turntable

The state-of-the-art technology and top-notch quality of fully automatic turntables in the 21st century set new standards in the industry. Experience the ultimate listening pleasure with the CS 529 turntable, featuring a twin gimbal tonearm bearing and high-quality pivot ball bearings to ensure maximum record tracking. This classic turntable features a dual tonearm that operates autonomously with just the touch of a button. Simply place your record on the turntable and press start for seamless operation. You can easily control the device via the terminal on the device or through Bluetooth connectivity to your smartphone or tablet. The CS 529 from Dual offers unparalleled convenience and first-rate sound quality. Key Features: Fully Automatic Turntable Ortofon 2M Red cartridge included Bluetooth audio to speakers, headphones or integrated systems Remote control of functions via app 5 Year warranty 

Rega RP3 Hub Bearing Assembly

Original replacement part for Rega RP3, Hub bearing assembly kit for a worn hub or bearing.

Nottingham Analogue Dais Drive Belt original (V1)

Replacement drive belt for Nottingham Analogue DAIS, this is for the original Dais Turntable only.

Goldring Ethos SE Moving Coil Cartridge - Exchange

This product requires your old Goldring Ethos SE Moving Coil Cartridge to be sent to us for exchange. Please send your cartridge with your order web reference to: HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Goldring Ethos SE Moving Coil Cartridge

Goldring has recently launched the Ethos SE - a special edition of its award-winning Ethos model that delivers an exquisite sound reproduction experience. As a top-of-the-range moving coil cartridge, Ethos SE combines uncompromised engineering with unique and exclusive features such as pure silver coils, low reluctance pole shoes, and a black anodized, aircraft-grade aluminum body to produce a cartridge of unparalleled detail retrieval, channel separation, and low coloration. With this new release, Goldring has set entirely new standards by providing a totally immersive, thrillingly complete musical experience that rivals even the most expensive cartridges on the market. Key Features: New pure silver coils feature fewer high conductivity windings, reducing the effective tip mass and internal impedance of the pick-up for improved tracking and greater transient response. Low-mass cross-armature core made from Swedish iron improves channel separation and produces a more realistic soundstage. A Vital line-contact diamond stylus features a narrow, low tip-mass, large contact-area that enhances high-frequency response and minimises distortion and colouration. New low-reluctance pole shoes ensure a smooth and extended frequency response. Low-resonance, aircraft-grade aluminium body is selected for its low density and superior rigidity.

Ortofon Record Stabiliser Heavy

Improve your vinyl listening experience with ease by using the Ortofon Record Stabiliser - a perfect blend of style and functionality for unmatched sound performance. This stabiliser ensures a secure fit of the record, minimises unwanted vibrations, and optimises the playback of warped records.

Ortofon Record Stabiliser

Improve your vinyl listening experience with ease by using the Ortofon Record Stabiliser - a perfect blend of style and functionality for unmatched sound performance. This stabiliser ensures a secure fit of the record, minimises unwanted vibrations, and optimises the playback of warped records.

Ortofon Premium Cartridge Alignment Tool

Ortofon's Premium Cartridge Alignment Tool is designed to offer a simple yet sophisticated solution for aligning your cartridge to achieve optimal performance while playing a record. This tool is 75% more rigid than the standard version and features high-visibility printing for better ease of use. To get the best results, aim to align the cartridge's cantilever with the alignment protractor.

Pro-Ject Vinyl Essentials Test Record

Maximise your turntable's sound and performance with the Pro-Ject test record. This versatile tool optimises all aspects, including channel identification, tracking ability, azimuth, and VTA, making it the perfect adjustment tool for your turntable, tonearm, and cartridge configuration.  

Pro-Ject Brush-IT Premium Fibre Record Cleaning Brush

For all vinyl lovers out there, the Brush it Premium is an essential accessory to ensure a flawless playing experience. This product features fine carbon-fibre bristles that effectively remove even the smallest dust particles from your records. Additionally, an Earthing wire is attached to reduce electrostatic charging. With Brush it Premium, you can quickly and easily clean your vinyl before each play and enjoy clear music without any noise disturbance. The grounding cable included with the product can be attached to any Earth point within your system, keeping your vinyl records static-free and ensuring clear music playback without any interference.

Ortofon AS-309R 12" Inch Tonearm

The AS-309R 12" Inch Reference tonearm is the result of years of extensive experience and expertise in the audio engineering field. Each part and component of the tonearms has been carefully upgraded with materials selected to minimise unwanted vibration and distortion, thus ensuring a clear, precise, and accurate sound. The AS-309R has undergone meticulous attention to precision and durability of every part and assembly, guaranteeing lasting durability for many years to come.

Ortofon AS-212R 9" Inch Tonearm

The AS-212R 9" Inch Reference tonearm is the result of years of extensive experience and expertise in the audio engineering field. Each part and component of the tonearms has been carefully upgraded with materials selected to minimise unwanted vibration and distortion, thus ensuring a clear, precise, and accurate sound. The AS-212R has undergone meticulous attention to precision and durability of every part and assembly, guaranteeing lasting durability for many years to come.

Pro-Ject T2 W Turntable

The T2 W is a full-feature turntable, boasting a precision engineered aluminium tonearm with a Sumiko Rainier cartridge pre-mounted and a thick glass platter. However, it's also one of the 'smartest' turntables available today thanks to its built-in Wi-Fi technology, allowing you to playback your vinyl records throughout your home reliably and in high-quality. Key Features: Dust cover included High-quality, accurately machined wood plinth Built-in speed control brings added convenience for easy changing between 33 and 45 RPM Heavy zero-resonance glass platter Premium 9" tonearm Isolating non-slip turntable feet Factory-mounted Sumiko Rainier cartridge with elliptical diamond stylus Dual-stage, split-passive moving magnet phono stage built-in Class-leading wi-fi streaming output to play your vinyl around the house

Shelter 901 III Moving Coil Cartridge

The Shelter 901 III MC phono cartridge uses a hard aluminium cantilever with a line-contact diamond stylus chip same structure with Harmony. Unlike models 7000 and 9000, which pursue more information or detail of sound, 901III provides the comfort of analogue playback sound from the moment when the stylus chip falls into the groove.

Shelter 501 III Moving Coil Cartridge

The Shelter 501 III MC phono cartridge is the latest development of the 501 series. Through continued refinement, the 501 III is equally responsive to the most recent recordings or any of your most cherished albums. The 501 III has a combination of an aluminium-clad boron cantilever and an elliptical diamond stylus tip. The expressiveness, power and energy fare superbly balanced to the highest level.

Shelter 301 II Moving Coil Cartridge

The Shelter 301 II MC phono cartridge has an aluminium cantilever and conical stylus tip. The stylus tip is a moderate size of 0.65mil. It is a great choice for traditional analogue reproductions as well as with legacy albums of your favourite performers.

Shelter Model 201 Moving Magnet Cartridge

The Model 201 is MM (moving magnet) cartridge. Designed for affordability, the weight and output are matched for a wide selection of tone arms and tables. Unlike many MM cartridges, there is no “peak” so it is a pleasing and robust performer.

Pro-Ject Pick it MC 3 Moving Coil Cartridge

The Pick it MC3 moving coil pick-up cartridge has been designed by Pro-Ject to technically complement Pro-Ject's tonearms and turntable packages, all while achieving a powerful and dynamic sound character that is as suited to pop and rock as it is for big orchestral pieces.  Overhead mounting cartridge for installing into a headshell Moving Coil cartridge design Spherical diamond stylus Cryogenically-treated aluminium cantilever

Pro-Ject Pick it MC9 Moving Coil Cartridge

Pro-Ject's flagship moving coil cartridge makes use of a "Special-Elliptical" diamond stylus profile to produce a highly accurate, yet musical, sound performance. Overhead mounting cartridge for installing into a headshell Moving Coil cartridge design Elliptical diamond stylus Cryogenically-treated aluminium cantilever

Pro-Ject Pick it PRO Balanced Cartridge

Pro-Ject's first true-balanced moving magnet cartridge opens up the world of balanced audio connections to a whole new price category.

Pro-Ject MC Step Up Box S3

The output level of MC cartridges is very low, compared to a MM (Moving Magnet) one it is about 10x lower, which means, you need a special phono amplifier. A higher gain is needed to utilize the signals, which can result in a higher noise level and distortion. The MC Step-Up Box S3 is the solution. Key Features: Sound upgrade for your MC cartridge Fully passive signal path without power supply Superior sound quality 1:16 transformer ratio Transformer with mu metal shielding Input impedance matching 10 or 100 Ohms Dual mono design principle Highest channel separation Gold-plated RCA terminals Solid aluminium casing protects against interference Available in silver or black

Pro-Ject MC Step Up Box DS3 B

The output level of MC cartridges is very low, compared to a MM (Moving Magnet) one it is about 10x lower, which means, you need a special phono amplifier. A higher gain is needed to utilize the signals, which can result in a higher noise level and distortion. The MC Step Up Box DS3 B is the solution. Key Features: Lundahl LL1678 high quality audio transformer Balanced in- and outputs Fully passive signal path without power supply 1:16 or 1:32 selectable transformer ratio Superior sound quality Transformer with mu metal shielding Dual mono design principle Low noise Highest channel separation Gold-plated RCA terminals Solid aluminium casing protects against interference Available in silver or black

Pro-Ject Tube Box DS3 B Phono-Preamplifier

The Tube Boxes have been an integral part of the Pro-ject product portfolio for many years. The Tube Box DS3 B adds balanced inputs and outputs to the beloved tube amplification. Key Specifications: Balanced XLR in- & outputs More precise cartridge loading options Precise RIAA equalisation Ultra low noise circuitry MM & MC capable Balanced & single-ended in- & outputs Dual mono design Continuously variable input impedance loading Superior low noise / low distortion Subsonic filter Aluminium casing protects against interference Available in silver or black Magnetic wooden side panels available separately

Rega Naia Turntable

The Rega Naia turntable is the result of years of painstaking development which was used to create the now famous ‘Naiad’ test bed turntable. The Naia takes the best of this development and technology and transfers it into a production ready version without compromise. The Naia is packed with ground-breaking features, materials and technology developed by Rega over many years to reach new levels of vinyl replay. Key Features: Graphene impregnated Carbon Fibre skeletal plinth with Tancast 8 foam core ZTA Zirconium toughened alumina (ceramic) central bearing RB titanium tonearm : One piece titanium vertical bearing and Titanium vertical spindle assembly Tungsten balance weight shaft and weight Ceramic top and bottom braces Reference advanced fully adjustable power supply Resonance controlled ceramic platter with improved flywheel effect and complex profile Low mass skeletal aluminium feet Triple Reference drive belts for improved stability and drive characteristics. Optional Rega Aphelion 2 MC factory fitted. Lifetime warranty against manufacture defects

Michell Coated Suspension Springs

Rubber-coated suspension springs bring a significant upgrade to all pre-2021 GyroDec / Gyro SE / Orbe / Orbe SE Turntables. By damping the spring's natural ability to resonate when exposed to airborne vibrations, the rubber coating prevents the music playing in the room from feeding vibrations back into the turntable. This small innovation gives a significant increase in performance. Bass response is tightened, and instruments and vocals are more defined within the sound stage.

Pro-Ject VT-E BT Vertical Bluetooth Turntable

A turntable set-up does not need to be complicated like rocket-science, the VT-E turntable proves that. Key Features: Instant playback with super-easy setup Vertical standing or optional wall mount Built-in Bluetooth phono stage for wireless use Switchable on/off phonostage Belt drive with silicone belt Record clamp for secure record fixing Low vibration synchronous motor & DC power supply 8.6” aluminium tonearm Ortofon OM 5E cartridge, pre-mounted Pre-adjusted tracking force & anti-skating force Special mechanism for perfect tracking in vertical position Pre-mounted gold-plated RCA interconnect cable

Okki Nokki One Record Clamp

Stainless Steel clamp holds records securely in-place during cleanings. Please Note: This clamp is designed to be used on the Okki Nokki One record cleaning machine only and is not suitable for turntables.

Thorens CA800 Cleaning Arm

Thorens are excited to introduce the latest addition to vinyl record cleaning - the CA 800 Antistatic Vinyl Cleaning Arm with goat hair! This cleaning arm has been specially designed to improve the sound quality to your vinyl records. It features high-quality goat hair bristles that allows for the removal of dirt and dust particles from your records without damaging the delicate surface. In addition, the CA 800 is equipped with carbon fibres that minimise static charge and prevent crackling noises. The cleaning arm is easy to install and can be applied to all Thorens turntable models. With the use of premium materials and precise craftsmanship, the CA 800 is durable and consistently performs at a high level. Key Features: Goat Hair with carbon fibres to derive statics Solid all aluminium arm construction One point bearing Height adjustable Flexible positioning

Thorens TD 204 Turntable

The Thorens TD 204 was developed for the audiophile beginner. A turntable with sound expansion potential for audiophiles.  The surface finishes "black high gloss" and "walnut high gloss" fit seamlessly into the existing range with the typical THORENS design. The brand identity is underlined by the high processing quality and guarantees a long life like all Thorens turntables. Key Features: Smooth running belt drive  Thorens TP 120 9” tonearm with J shape  Detachable headshell with SME connector  Switchable MM phono preamplifier  Die-cast aluminum platter  Pre-installed Audio Technics AT95E cartridge

Van den Hul Cartridge Tip Saver

The TIP SAVER protects your valuable sensitive cartridge from accidental damage during storage, transport… and domestic cleaning!  Suitable for our models:  DDT - II SpecialMC - TWO SpecialMC - 10 SpecialMC - One SpecialMC - One Super SpecialThe FrogThe Frog GoldThe Frog HO  

Van den Hul Cartridge Mounting Set

Van den Hul Cartridge Mounting Set: A small brush, specially designed for cleaning the tip. A very precise non-magnetic small screwdriver for cartridge mounting and alignment purposes. Dimensions: Blade / H / W / D = 3.0 / 58.5 / 6.5 / 6.5 mm. 4 non-magnetic stainless steel screws: 2 pcs. M2.5 x 5 mm + 2 pcs. M2.5 x 8 mm 2 nylon washers: Ø inside / Ø outside / D = 2.7 / 5.0 / 0.5 mm

Van den Hul Wooden Cartridge Box

A luxurious and robust wooden box intended for safe storage and transport of phono cartridges.

Van den Hul The Black Crimson Cartridge

The Crimson is a top performance custom handbuilt moving coil phono cartridge.  Specific characteristics for this great cartridge are a relatively high (0,65mV) output, gold coils, a Samarium-Cobalt magnet, extended channel separation and superb tracking ability. As the popularity of vinyl is reviving again, many requests came in to develop a High-end phono cartridge for a more affordable price than The Colibri. The Crimson is the result and probably one of the cartridges with the best value for money available. It is completely hand built by the Master himself and comes with a 200 hour service check-up, free of charge (for the original owner).

Van den Hul Spirit Level

Small accurate spirit level by dutch high end cable, phono cartridge manufacture Van Den Hul intended for tonearm and platter levelling purpose. Dimensions: H/W/D: 16/9/12.7 mm

Van den Hul The Bleep

Van Den Hul The Bleep is useful tool to help set up your audio equipment. Point it towards your equipment and listen for a Bleep which will tell you if there is any RF problems, The Bleep features adjustable sensitivity to help detect radio frequencies in your audio system.

Van den Hul Polarity Checker

The Polarity Checker is an unique device that will come in handy when fine-tuning your audio installation to minimise its residual ground currents. It is also a voltage, phase and cable-interruption checker that can be use-full with all kinds of other electrical appliances around the house as it has both direct and inductance test modes. No batteries!

Van den Hul A Tribute To Analog - LP

Beets Brothers – Lils Mackintosh – Hans Dulfer: A Tribute to Analogue This one of a kind LP is a top reference quality analogue recording. Its title reveals the true nature of this very special project: paying a respectful tribute to analogue Perfectly suited to demonstrate Van den Hul phono cartridges qualities It’s a live recording of jazz standards with excellent and devoted musicians doing what they do best with jazz standards. Hans Dulfer on sax, Lils Mackintosh on vocals and the Beets Brothers invite you to: Body and soul (J.Green) 6.57 Side AI remember Clifford (B. Golson) 6.05 Side ALike someone in love (J. van Heusen) 6.36 Side AA foggy day (G. Gershwin) 4.33 Side BLover man (R. Ramirez) 6.34 Side BOn a clear day (B. Lane) 6.06 Side BHow high the moon (N. Hamilton/M. Lewis) 4.03 Side B

Pro-Ject Measure it DS Universal Stylus Tracking Gauge

Measure it DS is a lightweight precision tracking force gauge. It is designed to work with each and every possible cartridge and tonearm combination, independent of weight, shape or design. Other, cheaper scales can be quite unhandy and unnecessary difficult to use with certain cartridges. Especially as you go up a few levels, and reach heavier and bigger high-end pickups. Measure it DS makes your set-up life easier and is the perfect choice to be safe for the future. The scale comes factory calibrated for highly accurate tracking force measurements, and the non-magnetic scale surface is especially suitable for MC cartridges. Key Features: Pre-calibrated at factory for ultimate precision Scale design optimized to work with any cartridge and tonearm combination Non-magnetic scale surface especially important for MC cartridges Auto off after 60 seconds 2x AAA batteries included LCD screen with back lighting  

Last Power Cleaner 3/4oz

LAST Power Cleaner removes record pressing residues and contaminants left over from the manufacturing process. These sticky residues are tightly bound to the groove wall and hold dirt that cannot be removed by regular record cleaners.

Michell Amplifier Binding Posts - Pack of 4

Please Note: This listing is for a pack of 4. Gold-plated ultra high quality speaker terminal, for amplifier.

Audio-Technica AT-HS3 Headshell - Black

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Black headshell design

Kronos Audio Discovery Turntable

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Kronos developed a wholly new way to attach the chassis to the suspension system, using completely different soft clamping methods. This treats the chassis more like the soundbox of a guitar or a violin because in that case how it’s held dictates to some degree how it sounds.

Moth Group TA3 Tonearm

Key Features: Redesigned vertical bearing housing Integrated arm clip Improved spring housing Extreme stability and almost friction free movement Hand selected bearings

Moth Group TA2 Tonearm

The Moth TA2 tonearm uses a custom one piece aluminium arm tube, carefully manufactured to optimise performance and reduce stress on the precision bearings. Each tonearm is meticulously hand assembled using custom tools and precision torque settings to guarantee optimum performance. This level of care ensures perfect tracking and maximises the amount of information that the cartridge can extract from the record groove.

Goldring E4 Stylus

Replacement stylus for the Goldring E4 moving magnet cartridge.

Goldring E4 Moving Magnet Cartridge

Goldring introduces its flagship E Series moving magnet cartridge: E4. Designed as the ultimate upgrade for any modern budget or midrange turntable, E4 represents the pinnacle of E Series engineering and performance. Key Features: New super-elliptical nude diamond stylus features lower effective tip mass, improved rigidity and better high frequency detail retrieval than ‘bonded’ elliptical alternatives. The lightweight and superior stiffness of the hollow aluminium cantilever allows the stylus to trace medium-to-high frequencies with greater accuracy. Magnetic Duplex Technology™ allows a more accurate transcription of the stereo groove which results in a more accurate soundstage Expert adjustment facility: Unlike most designs, E4 allows micro-adjustments to be made during the production process, ensuring each cartridge leaves the Goldring factory with optimised channel balance and crosstalk settings

Atacama Elite Eco 24 Reference Vinyl Storage Module

The Atacama Elite Eco 24 Reference series modular hifi support is a premium, attractive, semi-enclosed all-bamboo design, perfect for supporting a quality high end hifi system. Featuring their new Three-Dimensional Advanced Vectored Resonance Deflection Channels (or 3D-A.V.R.D.C. for short!), the Elite Eco 24 Reference represents the pinnacle of Atacama furniture design.