Michell GyroDec Suspension Springs and Adjuster Kit

Upgrade kit for original specification GyroDecs with single-piece steel suspension pillars, This kit now includes rubber-coated suspension springs. This upgrade simplifies adjusting the chassis height and spring position, enabling you to perfectly set up your turntable. With the turntable now effectively supported on three pin points, performance is also enhanced. Unlike the original design, the suspension pillar consists of three parts: a suspension spindle, thrust ball, and hollow pillar. The spindle is fixed to the base of the turntable, with the thrust ball at its top. The hollow pillar encases this assembly and supports the spring, which in turn holds the chassis. This configuration provides a three-position, high-pressure, point contact suspension system, minimising structural vibrations from reaching the sensitive components of the turntable.

Michell Record Clamp

Michell record clamp for use on GyroDec, TecnoDec, or third-party turntables.   Available with a black or silver knob.

Michell R Record Clamp

Michell 'R' record clamp for use on Rega and similar third party turntables with short centre spindles. Available with a black or silver knob.

Michell Orbe Clamp Kit

To bring all of the added benefit of the Orbe screw-down record clamp to GyroDec and Gyro SE owners, the Orbe Clamp Kit contains a new, threaded record spindle that can be easily retro-fitted to the main bearing body.

Michell Silicone Well Fluid

For refilling the well on the Hydraulic Reference and Transcripitors turntables and for fluid damped tonearms such as SME V etc.

Michell Synthetic Turntable Bearing Oil

Michell use a proprietary synthetic oil to lubricate the main bearing in all their turntables. The oil has to be a precise viscosity to enable the inverted bearings to circulate the oil correctly.

Michell UniCover Dust Cover

The UniCover is a great solution for people who have an open style turntable with no hinged lid and want to keep the essential parts of their turntable dust free. Please Note: This is also compatible with the TecnoDec and SE model turntables.

Michell Hydraulic Reference Drive Belt

Please Note: This will only fit the Hydraulic Reference turntable. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.

Michell SEcure Cover Dust Cover

Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust.

Michell Drive Belt

Please Note: This is for all Michell turntable models except the Reference Hydraulic. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.

Michell Orbe Platter Kit

The Orbe Platter Kit offers owners of GyroDecs and Gyro SE’s the opportunity to take their turntables to the next performance level.

Michell GyroDec/Orbe Arm Plate Decoupling Kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers.   The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer.

Michell Gyro Bearing

Please Note: This is not compatible with an original aluminium GyroDec platter, please upgrade to the impedance matched platter. Contrary to traditional designs, Michell's current main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows them to fully lubricate the inside of the entire bearing while the platter is turning.