Michell GyroDec Suspension Springs and Adjuster Kit

Upgrade kit for original specification GyroDecs with single-piece steel suspension pillars, This kit now includes rubber-coated suspension springs. This upgrade simplifies adjusting the chassis height and spring position, enabling you to perfectly set up your turntable. With the turntable now effectively supported on three pin points, performance is also enhanced. Unlike the original design, the suspension pillar consists of three parts: a suspension spindle, thrust ball, and hollow pillar. The spindle is fixed to the base of the turntable, with the thrust ball at its top. The hollow pillar encases this assembly and supports the spring, which in turn holds the chassis. This configuration provides a three-position, high-pressure, point contact suspension system, minimising structural vibrations from reaching the sensitive components of the turntable.

VPI Magic Lube Grease

1Oz. Plastic bottle of bearing lubricant for VPI turntables. You should re-lube your turntable bearing at least once a year to decrease wear. It also helps with speed regulation.

Pro-Ject Pulley 50Hz

The pulley is a precision-engineered component aimed at taking the rotating force of the motor and transferring it to the sub-platter or platter of the turntable - making the record spin at either 33 1/3 or 45 RPM. Almost all replaceable Pro-Ject pulleys are secured in place with a small grub screw, for fixing to the motor shaft - others need to be glued into place.

Pro-Ject Box Design Vinyl NRS Box S3

The Vinyl NRS Box S3 is designed with the sole purpose of bringing enjoyment back to older vinyl records that may have worn to a point where they are now impeded by high surface noise and audible crackling, even when clean. With its sophisticated digital signal processing, you can listen to those records again like new. Key Features:   NEW De-Crackling function to reduce clicks NEW noise reduction for vinyl records NEW reduces noise of the turntable drive Processing based on DSP with 24 bits 96 kHz sampling rate for precise processing Galvanic pure bypass if switched OFF Ideal transfer characteristics and linearity De-Crackling with adjustable sensitivity Line-level operation Compact design in standard S3-line case Full aluminium housing Available in silver or black

Pro-Ject Debut Alu Sub-Platter Upgrade

The Debut Alu Sub-Platter lifts the performance of any Debut turntable to the next level. The diamond cut aluminium sub-platter is machined to the highest tolerances, for greater performance and reliability over the standard supplied sub-platter. Key Features: Suitable for all Pro-Ject Debut turntables Precision machined out of aluminium to the highest tolerances Adds more mass and further dampens unwanted resonances Increases speed accuracy and speed stability (Wow & Flutter)

Pro-Ject X1/X2 Aluminium Upgrade Sub Platter

The Alu Upgrade Sub Platter transforms your turntable to the next level. The diamond cut aluminium sub-platter can be machined to much improved and higher tolerances and is a substantial upgrade to regular sub-platters. Key Features: Precision machined out of aluminium to the highest tolerances Adds more mass and further damps unwanted resonances Increases speed accuracy and short-term speed stability (Wow & Flutter)

Pro-Ject Grease-IT Inverted Bearing Lubricating Grease

A turntable is a delicate thing and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time, this is caused by many factors, such as climate and humidity.  Key Features: Lubricating grease for inverted bearing systems Keeps your turntable platter spinning smoothly Supplied as a pre-filled syringe

Pro-Ject The Classic Evo Sub-Platter

The Classic Evo sub-platter upgrades all older The Classic and The Classic SB SuperPack turntables to the same standard as The Classic Evo. Key Features: Suitable for The Classic turntables with standard sub-platter Precision machined out of aluminium to the finest tolerances Adds more mass and further damps unwanted resonances Increases speed accuracy and short term speed stability (Wow & Flutter)

Pro-Ject S/B Pulley For Speedbox 50Hz

The 78RPM pulley has been designed for Pro-Ject turntables which can rotate at 78RPM when combined with the Pro-Ject Speedbox.

Pro-Ject Acryl-IT E Platter For Elemental / Primary and Essential II Turntables

The perfect upgrade for any owner of the Elemental, Primary or Essential II turntable. The use of acrylic reduces tinny frequencies and helps accentuate the mid-range better.

Pro-Ject Anti-Skate Weight

Please Note: This weight is supplied pre-attached to the fishing wire.   The anti-skate weight is attached to a thin fishing wire that hooks onto the rear of most Pro-Ject tonearms and hangs over the anti-skate hoop. This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination for the arm to 'skip' or 'skate' across the record.

Pro-Ject Lube-IT Turntable Spindle Oil

Formerly known as Grease-IT, this platter bearing oil is a high-tech lubricant, allowing for drastically reduced friction around the main bearing. Now your turntable can spin at a constant velocity, improving its performance.   All you need is a couple of drops, and the performance will be solid for years to come.

Roksan LX7 Turntable Main Bearing Oil Kit

This Turntable Main Bearing Oil Kit from Roksan ensures smooth running and pitch stability of your Roksan turntable platter.

Michell Silicone Well Fluid

For refilling the well on the Hydraulic Reference and Transcripitors turntables and for fluid damped tonearms such as SME V etc.

Michell Synthetic Turntable Bearing Oil

Michell use a proprietary synthetic oil to lubricate the main bearing in all their turntables. The oil has to be a precise viscosity to enable the inverted bearings to circulate the oil correctly.

Van den Hul The Special Turntable Spindle Oil

Key Features: 30ml No mechanical contact between the spindle and the bearing bush. This flotation property minimises bearing noise and noticeable increases audio quality. Ø 1 micron microscopic spheres of zirconium oxide carry oxygen ions. This creates an actual physical separation between the spindle and the bearing bush. The oil viscosity alone reduces the friction between metal parts (spindle and bearing bush). It offers temperature stability and remains unadulterated through time and use. Perfect for higher clearance type platter spindle bearings. (For tighter clearances use Van Den Hul's TLF Type II)

Van den Hul The Lower Friction Oil II

VDH's 'The Lower Friction' (TLF) is a broad spectrum applicable super oil, especially intended to reduce bearing friction by forming an extremely stable lubrication layer between mechanical parts. Their TLF oil types are particularly suitable for close fitting - tight clearance bearings. The oils offer a superior combination of high performance properties, like for instance a very high resistance against breaking or penetration of the oil film: they can handle a pressure of around 180 - 200 kg/cm² at around 350 degrees Celsius (662 °F) without breaking away. The oils have a viscosity of just one third to one quarter of that of water: they easily spread and build a steady nano-thin layer on each surface. They don't contain Teflon, graphite or any other particles, don't oxidize and don't age. The normal operating temperature ranges up to 175 degrees Celsius (347 °F).

Nottingham Analogue Spacedeck / Ace Spacedeck Upgrade Kit

The heavy kit is made up of a 1" thick graphite pad which makes up for the top mat of the Hyperspace, Dais and Deco. It also comes with the spacers needed to raise the arm height. The heavy kit increases the rotating mass and stability of the system and also improves resonance control.

Rega 45RPM Adaptor

The record adaptor has been designed to be used with your 45rpm records that no longer have the centres, enabling you to play your old favourites.   The adaptor is simply fitted over the spindle of your turntable and the record will fit the outside of the adaptor. Then simply sit back, switch on and enjoy the music.

Nottingham Analogue Space 294 Upgrade Kit

The heavy kit is made up of a 1" thick graphite pad which makes up for the top mat of the Hyperspace, Dais and Deco. It also comes with the spacers needed to raise the arm height. The Heavy kit increases the rotating mass and stability of the system and also improves resonance control.

Michell Orbe Platter Kit

The Orbe Platter Kit offers owners of GyroDecs and Gyro SE’s the opportunity to take their turntables to the next performance level.

Michell GyroDec/Orbe Arm Plate Decoupling Kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers.   The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer.

Michell Gyro Bearing

Please Note: This is not compatible with an original aluminium GyroDec platter, please upgrade to the impedance matched platter. Contrary to traditional designs, Michell's current main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows them to fully lubricate the inside of the entire bearing while the platter is turning.

Pro-Ject 78 RPM Pulley Kit

Pulley Kit for playing 78 RPM records.   The 78 RPM kit contains a different belt and pulley (but does not include an alternative stylus or cartridge), in order to play 78 RPM records on Pro-ject turntables. Please note that by using this kit you will lose the ability to play at 45 RPM.   You will need a suitable stylus to play 78 RPM records.

Pro-Ject Acryl-IT Turntable Platter

Upgrade your Debut or 1Xpression turntable to Esprit-standards. Acryl it is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances. Key Features: Suitable for Debut and 1Xpression turntables Substitutes metal platter Inert material avoids resonances Dent for label implemented Ideal for use with Clamp it Audiophile sound tuning Optical upvaluation