Pro-Ject Box Design Vinyl NRS Box S3

The Vinyl NRS Box S3 is designed with the sole purpose of bringing enjoyment back to older vinyl records that may have worn to a point where they are now impeded by high surface noise and audible crackling, even when clean. With its sophisticated digital signal processing, you can listen to those records again like new. Key Features:   NEW De-Crackling function to reduce clicks NEW noise reduction for vinyl records NEW reduces noise of the turntable drive Processing based on DSP with 24 bits 96 kHz sampling rate for precise processing Galvanic pure bypass if switched OFF Ideal transfer characteristics and linearity De-Crackling with adjustable sensitivity Line-level operation Compact design in standard S3-line case Full aluminium housing Available in silver or black

Pro-Ject Debut Alu Sub-Platter Upgrade

The Debut Alu Sub-Platter lifts the performance of any Debut turntable to the next level. The diamond cut aluminium sub-platter is machined to the highest tolerances, for greater performance and reliability over the standard supplied sub-platter. Key Features: Suitable for all Pro-Ject Debut turntables Precision machined out of aluminium to the highest tolerances Adds more mass and further dampens unwanted resonances Increases speed accuracy and speed stability (Wow & Flutter)

Pro-Ject X1/X2 Aluminium Upgrade Sub Platter

The Alu Upgrade Sub Platter transforms your turntable to the next level. The diamond cut aluminium sub-platter can be machined to much improved and higher tolerances and is a substantial upgrade to regular sub-platters. Key Features: Precision machined out of aluminium to the highest tolerances Adds more mass and further damps unwanted resonances Increases speed accuracy and short-term speed stability (Wow & Flutter)

Pro-Ject The Classic Evo Sub-Platter

The Classic Evo sub-platter upgrades all older The Classic and The Classic SB SuperPack turntables to the same standard as The Classic Evo. Key Features: Suitable for The Classic turntables with standard sub-platter Precision machined out of aluminium to the finest tolerances Adds more mass and further damps unwanted resonances Increases speed accuracy and short term speed stability (Wow & Flutter)

Pro-Ject Acryl-IT E Platter For Elemental / Primary and Essential II Turntables

The perfect upgrade for any owner of the Elemental, Primary or Essential II turntable. The use of acrylic reduces tinny frequencies and helps accentuate the mid-range better.

Pro-Ject Anti-Skate Weight

Please Note: This weight is supplied pre-attached to the fishing wire.   The anti-skate weight is attached to a thin fishing wire that hooks onto the rear of most Pro-Ject tonearms and hangs over the anti-skate hoop. This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination for the arm to 'skip' or 'skate' across the record.

Nottingham Analogue Spacedeck / Ace Spacedeck Upgrade Kit

The heavy kit is made up of a 1" thick graphite pad which makes up for the top mat of the Hyperspace, Dais and Deco. It also comes with the spacers needed to raise the arm height. The heavy kit increases the rotating mass and stability of the system and also improves resonance control.

Pro-Ject Acryl-IT Turntable Platter

Upgrade your Debut or 1Xpression turntable to Esprit-standards. Acryl it is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances. Key Features: Suitable for Debut and 1Xpression turntables Substitutes metal platter Inert material avoids resonances Dent for label implemented Ideal for use with Clamp it Audiophile sound tuning Optical upvaluation