Pro-Ject Pulley 50Hz

The pulley is a precision-engineered component aimed at taking the rotating force of the motor and transferring it to the sub-platter or platter of the turntable - making the record spin at either 33 1/3 or 45 RPM. Almost all replaceable Pro-Ject pulleys are secured in place with a small grub screw, for fixing to the motor shaft - others need to be glued into place.

Pro-Ject Box Design Vinyl NRS Box S3

The Vinyl NRS Box S3 is designed with the sole purpose of bringing enjoyment back to older vinyl records that may have worn to a point where they are now impeded by high surface noise and audible crackling, even when clean. With its sophisticated digital signal processing, you can listen to those records again like new. Key Features:   NEW De-Crackling function to reduce clicks NEW noise reduction for vinyl records NEW reduces noise of the turntable drive Processing based on DSP with 24 bits 96 kHz sampling rate for precise processing Galvanic pure bypass if switched OFF Ideal transfer characteristics and linearity De-Crackling with adjustable sensitivity Line-level operation Compact design in standard S3-line case Full aluminium housing Available in silver or black

Pro-Ject Debut Alu Sub-Platter Upgrade

The Debut Alu Sub-Platter lifts the performance of any Debut turntable to the next level. The diamond cut aluminium sub-platter is machined to the highest tolerances, for greater performance and reliability over the standard supplied sub-platter. Key Features: Suitable for all Pro-Ject Debut turntables Precision machined out of aluminium to the highest tolerances Adds more mass and further dampens unwanted resonances Increases speed accuracy and speed stability (Wow & Flutter)

Pro-Ject X1/X2 Aluminium Upgrade Sub Platter

The Alu Upgrade Sub Platter transforms your turntable to the next level. The diamond cut aluminium sub-platter can be machined to much improved and higher tolerances and is a substantial upgrade to regular sub-platters. Key Features: Precision machined out of aluminium to the highest tolerances Adds more mass and further damps unwanted resonances Increases speed accuracy and short-term speed stability (Wow & Flutter)

Pro-Ject Grease-IT Inverted Bearing Lubricating Grease

A turntable is a delicate thing and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time, this is caused by many factors, such as climate and humidity.  Key Features: Lubricating grease for inverted bearing systems Keeps your turntable platter spinning smoothly Supplied as a pre-filled syringe

Pro-Ject The Classic Evo Sub-Platter

The Classic Evo sub-platter upgrades all older The Classic and The Classic SB SuperPack turntables to the same standard as The Classic Evo. Key Features: Suitable for The Classic turntables with standard sub-platter Precision machined out of aluminium to the finest tolerances Adds more mass and further damps unwanted resonances Increases speed accuracy and short term speed stability (Wow & Flutter)

Pro-Ject S/B Pulley For Speedbox 50Hz

The 78RPM pulley has been designed for Pro-Ject turntables which can rotate at 78RPM when combined with the Pro-Ject Speedbox.

Pro-Ject Acryl-IT E Platter For Elemental / Primary and Essential II Turntables

The perfect upgrade for any owner of the Elemental, Primary or Essential II turntable. The use of acrylic reduces tinny frequencies and helps accentuate the mid-range better.

Pro-Ject Anti-Skate Weight

Please Note: This weight is supplied pre-attached to the fishing wire.   The anti-skate weight is attached to a thin fishing wire that hooks onto the rear of most Pro-Ject tonearms and hangs over the anti-skate hoop. This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination for the arm to 'skip' or 'skate' across the record.

Pro-Ject Lube-IT Turntable Spindle Oil

Formerly known as Grease-IT, this platter bearing oil is a high-tech lubricant, allowing for drastically reduced friction around the main bearing. Now your turntable can spin at a constant velocity, improving its performance.   All you need is a couple of drops, and the performance will be solid for years to come.

Pro-Ject 78 RPM Pulley Kit

Pulley Kit for playing 78 RPM records.   The 78 RPM kit contains a different belt and pulley (but does not include an alternative stylus or cartridge), in order to play 78 RPM records on Pro-ject turntables. Please note that by using this kit you will lose the ability to play at 45 RPM.   You will need a suitable stylus to play 78 RPM records.

Pro-Ject Acryl-IT Turntable Platter

Upgrade your Debut or 1Xpression turntable to Esprit-standards. Acryl it is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances. Key Features: Suitable for Debut and 1Xpression turntables Substitutes metal platter Inert material avoids resonances Dent for label implemented Ideal for use with Clamp it Audiophile sound tuning Optical upvaluation