Michell GyroDec Suspension Springs and Adjuster Kit

Upgrade kit for original specification GyroDecs with single-piece steel suspension pillars, This kit now includes rubber-coated suspension springs. This upgrade simplifies adjusting the chassis height and spring position, enabling you to perfectly set up your turntable. With the turntable now effectively supported on three pin points, performance is also enhanced. Unlike the original design, the suspension pillar consists of three parts: a suspension spindle, thrust ball, and hollow pillar. The spindle is fixed to the base of the turntable, with the thrust ball at its top. The hollow pillar encases this assembly and supports the spring, which in turn holds the chassis. This configuration provides a three-position, high-pressure, point contact suspension system, minimising structural vibrations from reaching the sensitive components of the turntable.

VPI Magic Lube Grease

1Oz. Plastic bottle of bearing lubricant for VPI turntables. You should re-lube your turntable bearing at least once a year to decrease wear. It also helps with speed regulation.

Roksan LX7 Turntable Main Bearing Oil Kit

This Turntable Main Bearing Oil Kit from Roksan ensures smooth running and pitch stability of your Roksan turntable platter.

Michell Silicone Well Fluid

For refilling the well on the Hydraulic Reference and Transcripitors turntables and for fluid damped tonearms such as SME V etc.

Michell Synthetic Turntable Bearing Oil

Michell use a proprietary synthetic oil to lubricate the main bearing in all their turntables. The oil has to be a precise viscosity to enable the inverted bearings to circulate the oil correctly.

Nottingham Analogue Spacedeck / Ace Spacedeck Upgrade Kit

The heavy kit is made up of a 1" thick graphite pad which makes up for the top mat of the Hyperspace, Dais and Deco. It also comes with the spacers needed to raise the arm height. The heavy kit increases the rotating mass and stability of the system and also improves resonance control.

Nottingham Analogue Space 294 Upgrade Kit

The heavy kit is made up of a 1" thick graphite pad which makes up for the top mat of the Hyperspace, Dais and Deco. It also comes with the spacers needed to raise the arm height. The Heavy kit increases the rotating mass and stability of the system and also improves resonance control.

Michell Orbe Platter Kit

The Orbe Platter Kit offers owners of GyroDecs and Gyro SE’s the opportunity to take their turntables to the next performance level.

Michell GyroDec/Orbe Arm Plate Decoupling Kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers.   The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer.

Michell Gyro Bearing

Please Note: This is not compatible with an original aluminium GyroDec platter, please upgrade to the impedance matched platter. Contrary to traditional designs, Michell's current main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows them to fully lubricate the inside of the entire bearing while the platter is turning.