Michell Coated Suspension Springs

Rubber-coated suspension springs bring a significant upgrade to all pre-2021 GyroDec / Gyro SE / Orbe / Orbe SE Turntables. By damping the spring's natural ability to resonate when exposed to airborne vibrations, the rubber coating prevents the music playing in the room from feeding vibrations back into the turntable. This small innovation gives a significant increase in performance. Bass response is tightened, and instruments and vocals are more defined within the sound stage.

Pro-Ject VTA-IT Tonearm Spacer

The VTA-IT is a 1.5mm tonearm spacer, allowing you to increase the vertical tracking angle of your turntables tonearm. With VTA-IT you will be able to install a larger variety of cartridge types on your tonearm or headshell.  Please Note: The installation of “VTA-IT“ should be done by an experienced technician.  Compatibility: Debut I-III Debut Carbon Debut Carbon EVO Essential I-III (only standard configurations) Required Tools: Philips #1 Screwdriver & 5.5mm Nut Driver Wrench

Michell VTA Adjuster 3

Please Note: This is compatible with Rega tonearms using the redesigned three point fixing base such as the RB220, RB330. The Michell VTA adjuster 3 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell VTA Adjuster 2

Please Note: This is compatible with Rega tonearms and derivatives using the original three point fixing base such as the RB202, RB303. The Michell VTA adjuster 2 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Pro-Ject Adjust-IT Tonearm Bearing Adjustment Tool

Precision machined tonearm bearing fine adjustment tool. Fits all Pro-Ject tonearms and allows qualified personnel to optimise bearing adjustment, when bearings are misadjusted, because of unassured transport of a turntable.

Michell Locknut and VTA Adjuster Pack

Twin pack consisting of: Finger Locking nut (to suit Rega arms) A Vertical Tracking Angle adjustment sleeve for the Rega RB-250, RB-300 and RB-600 arms, to be used with the new-style Rega arm board Michell have been making since the beginning of 1999.  If used with other turntable brands, slight enlargement of the original Rega mounting hole will be necessary to accommodate the increased diameter of the VTA sleeve.

Michell VTA Adjuster 1

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Rega Single Point Tonearm 2mm VTA Spacer

Arm Height Adjustment spacer for RB250 and RB300 - size 2mm.   When Rega arms are fitted to turntables from other manufacturers it may be necessary to add Rega arm spacers to achieve the correct arm height.   Circular spacers are available for the RB250 and RB300 in thickness' of 2mm. An arm 'Sleeve nut' is also available for circumstances where the arm base does not protrude below the arm mounting board.   Please Note: Turntable spacers are not necessary on all Rega turntables.