Rega RB3000 Tonearm

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation. The RB3000 represents the pinnacle of Rega’s tonearm engineering, pushing the boundaries of analog design to achieve near-zero tolerances. Meticulously hand-built by a team of highly skilled technicians, the RB3000 is a masterclass in precision. It features an innovative, hand-polished aluminium arm tube designed to redistribute mass and eliminate resonance, ensuring the most stable platform possible for your cartridge. At its heart are improved, hand-selected bearings, each uniquely matched to its spindle as an interference fit. This Rega-developed method ensures there is no measurable "play" in the assembly, dramatically increasing the amount of detail retrieved from the record surface. Built without the use of adhesives to maintain maximum rigidity, the RB3000 is designed to maximise the performance of both the tonearm and your chosen cartridge (sold separately). Key Features: Meticulously hand built Hand selected bearings to be an interference fit with the paired spindle Near frictionless movement horizontally and vertically Designed for maximum performance Lifetime warranty against manufacture defects

Audio-Technica AT-LT10 Universal Headshell

The AT-LT10 is a versatile ½"-mount headshell designed for 4-pin turntable cartridges, whether they have threaded inserts or not. Its elongated through holes enable precise cartridge positioning to ensure correct overhang and optimal tonearm length. Crafted from lightweight aluminum die-cast, the body effectively minimises vibrations, while the slip-resistant finger lift allows for precise stylus placement. The AT-LT10 features OFC (oxygen-free copper) lead wires and includes mounting screws, catering to professional needs. Key Features Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record Includes mounting screws

Michell Coated Suspension Springs

Rubber-coated suspension springs bring a significant upgrade to all pre-2021 GyroDec / Gyro SE / Orbe / Orbe SE Turntables. By damping the spring's natural ability to resonate when exposed to airborne vibrations, the rubber coating prevents the music playing in the room from feeding vibrations back into the turntable. This small innovation gives a significant increase in performance. Bass response is tightened, and instruments and vocals are more defined within the sound stage.

Audio-Technica AT-HS3 Headshell - Black

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Black headshell design

Pro-Ject VTA-IT Tonearm Spacer

The VTA-IT is a 1.5mm tonearm spacer, allowing you to increase the vertical tracking angle of your turntables tonearm. With VTA-IT you will be able to install a larger variety of cartridge types on your tonearm or headshell.  Please Note: The installation of “VTA-IT“ should be done by an experienced technician.  Compatibility: Debut I-III Debut Carbon Debut Carbon EVO Essential I-III (only standard configurations) Required Tools: Philips #1 Screwdriver & 5.5mm Nut Driver Wrench

Pro-Ject 12CC Evolution Tonearm

The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing. Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre. Conical armtube avoids standing wave reflections. Inverted bearing design with four ABEC7 spec ballraces. Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances. Sorbothane® -damped counterweight effectively counteracts unwanted resonances. Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. Straight armtube reduces toe-in error. Silicone-damped armlift can be adjusted to suit arm height. The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw

Pro-Ject 10CC Evolution Tonearm

The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre. Conical armtube avoids standing wave reflections Inverted bearing design with four ABEC7 spec ballraces. Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances. Sorbothane® -damped counterweight effectively counteracts unwanted resonances. Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. Straight armtube reduces toe-in error. Silicone-damped armlift can be adjusted to suit arm height. The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets. Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.

Pro-Ject 9CC Evolution Tonearm

Pro-Ject's 9" precision tone arm with carbon-fibre armtube is efficiently designed to lead parasitic vibrations away from the cartridge into the mounting board which guarantees the precise tracking of the record grooves by the needle and also facilitates fine adjustment of vertical and horizontal tracing. Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre Conical armtube avoids standing wave reflections Inverted bearing design with four ABEC7 spec ballraces Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonance Sorbothane damped counterweight effectively counteracts unwanted resonances Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracking angle) Single Screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell Straight armtube reduces toe-in error Silicone damped armlift can be adjusted to suit arm height The internal wiring consists of flexible high purity copper from the headshell right through to the gold plated phono sockets Available with 5-pole standard socket, flying lead or terminal with phono sockets and earth screws

Michell VTA Adjuster 3

Please Note: This is compatible with Rega tonearms using the redesigned three point fixing base such as the RB220, RB330. The Michell VTA adjuster 3 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell VTA Adjuster 2

Please Note: This is compatible with Rega tonearms and derivatives using the original three point fixing base such as the RB202, RB303. The Michell VTA adjuster 2 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Rega RB880 Tonearm

Designed using the latest 3D CAD & CAM technology,the new RB880 is the culmination of almost 40 years of tonearm design experience. This tonearm features a new aluminium vertical bearing housing, a redesigned sleeve and vertical bearing shaft (both manufactured from stainless steel) to improve mounting stability and overall rigidity.

Audio-Technica AT-HS6 Headshell

9g headshell aluminium die cast body. AT-HS6 9g headshell aluminium die cast body - Die-cast aluminium body, Integral finger lift, Includes terminals quad wire and 1 pair of 10mm screws and 1 pair of 8mm screws.

Pro-Ject Replacement Counterweight

The purpose of a counterweight is to apply the optimum down force for your pick-up cartridge to read the most amount of detail within the record groove.

Audio-Technica AT-HS3 Headshell - Red

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Vivid red headshell design

Pro-Ject Adjust-IT Tonearm Bearing Adjustment Tool

Precision machined tonearm bearing fine adjustment tool. Fits all Pro-Ject tonearms and allows qualified personnel to optimise bearing adjustment, when bearings are misadjusted, because of unassured transport of a turntable.

Michell Locknut and VTA Adjuster Pack

Twin pack consisting of: Finger Locking nut (to suit Rega arms) A Vertical Tracking Angle adjustment sleeve for the Rega RB-250, RB-300 and RB-600 arms, to be used with the new-style Rega arm board Michell have been making since the beginning of 1999.  If used with other turntable brands, slight enlargement of the original Rega mounting hole will be necessary to accommodate the increased diameter of the VTA sleeve.

Michell VTA Adjuster 1

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Rega Single Point Tonearm 2mm VTA Spacer

Arm Height Adjustment spacer for RB250 and RB300 - size 2mm.   When Rega arms are fitted to turntables from other manufacturers it may be necessary to add Rega arm spacers to achieve the correct arm height.   Circular spacers are available for the RB250 and RB300 in thickness' of 2mm. An arm 'Sleeve nut' is also available for circumstances where the arm base does not protrude below the arm mounting board.   Please Note: Turntable spacers are not necessary on all Rega turntables.