Ortofon SH-4 Headshell

The SH-4 headshell is a great, affordable upgrade option for audiophiles on a budget. A perfect partner for the 2m Series, the SH-4 is a high-quality, solid headshell option. Key Features: High-quality, solid headshell Ergonomic design with long finger lift

Dynavector 507 MKII Tonearm

The new MKII version of the Dynavector DV 507 tonearm has made its long-awaited debut, building on the strengths of the original DV 507 which has enjoyed the highest reputation among audiophiles world-wide since its appearance in 1984.

Pro-Ject 12CC Evolution Tonearm

The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing. Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre. Conical armtube avoids standing wave reflections. Inverted bearing design with four ABEC7 spec ballraces. Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances. Sorbothane® -damped counterweight effectively counteracts unwanted resonances. Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. Straight armtube reduces toe-in error. Silicone-damped armlift can be adjusted to suit arm height. The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw

Pro-Ject 10CC Evolution Tonearm

The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre. Conical armtube avoids standing wave reflections Inverted bearing design with four ABEC7 spec ballraces. Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances. Sorbothane® -damped counterweight effectively counteracts unwanted resonances. Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. Straight armtube reduces toe-in error. Silicone-damped armlift can be adjusted to suit arm height. The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets. Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.

Pro-Ject 9CC Evolution Tonearm

Pro-Ject's 9" precision tone arm with carbon-fibre armtube is efficiently designed to lead parasitic vibrations away from the cartridge into the mounting board which guarantees the precise tracking of the record grooves by the needle and also facilitates fine adjustment of vertical and horizontal tracing. Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre Conical armtube avoids standing wave reflections Inverted bearing design with four ABEC7 spec ballraces Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonance Sorbothane damped counterweight effectively counteracts unwanted resonances Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracking angle) Single Screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell Straight armtube reduces toe-in error Silicone damped armlift can be adjusted to suit arm height The internal wiring consists of flexible high purity copper from the headshell right through to the gold plated phono sockets Available with 5-pole standard socket, flying lead or terminal with phono sockets and earth screws

Michell TecnoArm 2 Tonearm

The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price.

Audio-Technica AT-HS4 Headshell

The AT-HS4 is a universal ½"-mount headshell designed for use with straight 4-pin tonearms.    Key Features: Universal ½"-mount headshell for 4-pin tonearms Ultra-lightweight aluminium die-cast body keeps vibration to the bare minimum Angled shape suitable for straight tonearms Finger lift enables precise stylus placement Includes lead wires and mounting screws

Pro-Ject Signature Tonearm

The Signature tonearms from Pro-Ject Audio Systems offer true audiophile sound and striking style. They represent the absolute best performance possible. Key Features: Single-pivot tonearm design with minimal friction Available in 10" and 12" length Stunning high-gloss finish Non-magnetic low resonance construction Accomodates a wide range of cartridges, including SPU models Aluminium headshell with built-in fingerlift included High-conductivity Oxygen-Free Copper (OFC) headshell cables included Built-in 5-pin DIN connector (tonearm cable not included) VTA, azimuth and overhang adjustment all easily accessible Selection of set-up tools included

Rega RB330 Stainless Steel Counterweight

Replacement counterweight for the RB330 tonearm.   Please Note: The RB330 tonearm comes as standard on the following turntables. Planar 3 - Mild Steel Planar 6 - Stainless Steel This counterweight is also compatible with the RB303 tonearm.

Audio-Technica AT-HS6 Headshell

9g headshell aluminium die cast body. AT-HS6 9g headshell aluminium die cast body - Die-cast aluminium body, Integral finger lift, Includes terminals quad wire and 1 pair of 10mm screws and 1 pair of 8mm screws.

Ortofon LH-4000 Headshell

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Rega RB110 Mild Steel Counterweight

Replacement counterweight for the RB110 tonearm.   Please Note: The RB110 tonearm comes as standard on the following turntables. Planar 1 Planar 1 Plus This counterweight is also compatible with the RB101 tonearm.

Rega Extra Heavy Tungsten Counterweight

Extra heavy counterweight.

Rega RB300/700 Tungsten Counterweight

Replacement counterweight for the RB300 and RB700 tonearms.

Rega RB220 Mild Steel Counterweight

Replacement counterweight for the RB220 tonearm. Please Note: The RB220 tonearm comes as standard on the following turntables. Planar 78 Planar 2 This counterweight is also compatible with the RB202 tonearm.

Rega RB880 Stainless Steel Counterweight

Replacement counterweight for the RB880 tonearm. Please Note: The RB880 tonearm comes as standard on the following turntables. Planar 8 This counterweight is also compatible with the RB808, RB330 and RB303 tonearms.

Rega RB3000 Tungsten Counterweight

Replacement counterweight for the RB3000 tonearm.   Please Note: The RB220 tonearm comes as standard on the following turntables. Planar 10 This counterweight is also compatible with the RB2000 and RB1000 tonearms.

Rega RB330 Tonearm

Rega's team have worked tirelessly to improve every aspect of this new tonearm. Offering improved ergonomics, usability and sonic performance. Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated arm clip and an improved spring housing with easier to read numbers. Other improvements include a Rega made, low capacitance phono cable terminated with high quality 'Neutrik' plugs, improved lower friction, precision horizontal and vertical bearings and a re-designed 100g mild steel balance weight.

Pro-Ject Signature Headshell

The Signature range of headshells are high quality headshells made by Pro-Ject designed for all standard SME mount tonearms. Each headshell is created from a different material giving it its own signature sound characteristic. Key Features: Fits all tonearms with SME mounting standard 1/2 inch cartridge mount 3 different headshell materials: Aluminium, Carbon, Wood High conductivity OFC headshell cables included High rigidity & low mass Low resonance construction Non magnetic Azimuth adjustment with screw on side Built-in fingerlift

Rega RB330 Mild Steel Counterweight

Replacement counterweight for the RB330 tonearm.   Please Note: The RB330 tonearm comes as standard on the following turntables. Planar 3 - Mild Steel Planar 6 - Stainless Steel This counterweight is also compatible with the RB303 tonearm.

Ortofon LH-10000 Headshell

The LH-10000 is a new exceptionally high quality headshell made using a high performance aluminium alloy with zinc as the primary alloying element. The Aluminium alloy is strong, with strength comparable to steel. The headshell has good fatigue strength and machinability, but offers more resistance to corrosion than many other Aluminium alloys.

Ortofon LH-2000 Headshell

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges.

Ortofon LH-6000 Headshell

The LH-6000 is a high quality headshell designed specifically for the Kontrapunkt series, Jubilee, MC Windfeld and Cadenza Series cartridges. Its rounded front portion facilitates proper mounting and compliments each of these cartridges.

Ortofon LH-9000 Headshell

Exceptionally high quality carbon fibre headshell, the LH-9000 is made using carbon fibre resin for the elimination of unwanted resonances. The LH-9000 is perfect for a variety of high-end cartridges.

Ortofon SPU N Adaptor

A headshell adaptor for SPU N Royal, SPU N Classic and SPU N Reference Gold.

Michell TecnoWeight

The TecnoWeight is a great upgrade for anyone with a compatible Rega tonearm. This easy to fit counter weight system is made from heavy stainless steel and aluminium.    Please Note: This is compatible with all Rega tonearms and derivatives, except RB100 series tonearms.

Nottingham Analogue Interspace Tonearm

The Interspace Tone Arm combines an ultra light weight carbon fibre arm tube with a damped uni-pivot bearing and is a scaled down version of the Ace Space arm.