Audio-Technica AT-LT10 Universal Headshell

The AT-LT10 is a versatile ½"-mount headshell designed for 4-pin turntable cartridges, whether they have threaded inserts or not. Its elongated through holes enable precise cartridge positioning to ensure correct overhang and optimal tonearm length. Crafted from lightweight aluminum die-cast, the body effectively minimises vibrations, while the slip-resistant finger lift allows for precise stylus placement. The AT-LT10 features OFC (oxygen-free copper) lead wires and includes mounting screws, catering to professional needs. Key Features Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record Includes mounting screws

Ortofon AS-309R 12" Inch Tonearm

The AS-309R 12" Inch Reference tonearm is the result of years of extensive experience and expertise in the audio engineering field. Each part and component of the tonearms has been carefully upgraded with materials selected to minimise unwanted vibration and distortion, thus ensuring a clear, precise, and accurate sound. The AS-309R has undergone meticulous attention to precision and durability of every part and assembly, guaranteeing lasting durability for many years to come.

Ortofon AS-212R 9" Inch Tonearm

The AS-212R 9" Inch Reference tonearm is the result of years of extensive experience and expertise in the audio engineering field. Each part and component of the tonearms has been carefully upgraded with materials selected to minimise unwanted vibration and distortion, thus ensuring a clear, precise, and accurate sound. The AS-212R has undergone meticulous attention to precision and durability of every part and assembly, guaranteeing lasting durability for many years to come.

Michell Coated Suspension Springs

Rubber-coated suspension springs bring a significant upgrade to all pre-2021 GyroDec / Gyro SE / Orbe / Orbe SE Turntables. By damping the spring's natural ability to resonate when exposed to airborne vibrations, the rubber coating prevents the music playing in the room from feeding vibrations back into the turntable. This small innovation gives a significant increase in performance. Bass response is tightened, and instruments and vocals are more defined within the sound stage.

Audio-Technica AT-HS3 Headshell - Black

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Black headshell design

Moth Group TA3 Tonearm

Key Features: Redesigned vertical bearing housing Integrated arm clip Improved spring housing Extreme stability and almost friction free movement Hand selected bearings

Moth Group TA2 Tonearm

The Moth TA2 tonearm uses a custom one piece aluminium arm tube, carefully manufactured to optimise performance and reduce stress on the precision bearings. Each tonearm is meticulously hand assembled using custom tools and precision torque settings to guarantee optimum performance. This level of care ensures perfect tracking and maximises the amount of information that the cartridge can extract from the record groove.

Ortofon SH-4 Headshell

The SH-4 headshell is a great, affordable upgrade option for audiophiles on a budget. A perfect partner for the 2m Series, the SH-4 is a high-quality, solid headshell option. Key Features: High-quality, solid headshell Ergonomic design with long finger lift

Dynavector 507 MKII Tonearm

The new MKII version of the Dynavector DV 507 tonearm has made its long-awaited debut, building on the strengths of the original DV 507 which has enjoyed the highest reputation among audiophiles world-wide since its appearance in 1984.

VPI Finger Lift

A metal finger lift to both serve as a washer for your cartridge and area to grab and cue your tonearm onto your record.

VPI Counterweight for Fatboy Tonearms

Counterweight for Fatboy tonearms.

VPI Counterweight for JMW Tonearms

Counterweight for JMW tonearms with a 0.5" diameter.

VPI JMW-9 Metal Uni-Pivot Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Effective Mass: 10.2 - g Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36%

VPI FB-12 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 300 - mm Effective length: 313.0 - mm Effective mass: 12.5 - g Overhang: 13 - mm Offset angle: 17.37 - degrees Average RMS distortion: 0.267% Please Note: VTA base not included.

VPI FB-12 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 300 - mm Effective length: 313 - mm Overhang: 13 - mm Offset angle: 17.37 - degrees Average RMS distortion: 0.27% Please Note: VTA base not included.

VPI FB-10 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 258 - mm Effective length: 273.4 - mm Overhang: 15.4 - mm Offset angle: 19.98 - degrees Average RMS distortion: 0.31% Please Note: VTA base not included.

VPI FB-10 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 258 - mm Effective length: 273.4 - mm Effective mass: 10.7 - g Overhang: 15.4 - mm Offset angle: 19.98 - degrees Average RMS distortion: 0.311% Please Note: VTA base not included.

VPI FB-9 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36% Please Note: VTA base not included.

VPI FB-9 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Effective Mass: 10.2 - g Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36% Please Note: VTA base not included.

Michell Standard Gyro Arm Plate

Michell can supply a range of arm plates for use on their turntables. Standard patterns include Rega, SME, Linn, Hadcock and Graham.

Michell VTA Adjuster 3

Please Note: This is compatible with Rega tonearms using the redesigned three point fixing base such as the RB220, RB330. The Michell VTA adjuster 3 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell VTA Adjuster 2

Please Note: This is compatible with Rega tonearms and derivatives using the original three point fixing base such as the RB202, RB303. The Michell VTA adjuster 2 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell TecnoArm 2 Tonearm

The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price.

Audio-Technica AT-HS4 Headshell

The AT-HS4 is a universal ½"-mount headshell designed for use with straight 4-pin tonearms.    Key Features: Universal ½"-mount headshell for 4-pin tonearms Ultra-lightweight aluminium die-cast body keeps vibration to the bare minimum Angled shape suitable for straight tonearms Finger lift enables precise stylus placement Includes lead wires and mounting screws

Audio-Technica AT-LH18H Headshell

18g adjustable through hole type headshell with OFC lead-wires. Key Features: Aluminum headshell with hard anodized finish reduces unwanted vibration Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series. Adjustable cylinder enables precise azimuth and overhang setting Available in three weights: 13 g (AT-LH13H), 15 g (AT-LH15H), and 18 g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements

Audio-Technica AT-LH15H Headshell

15g adjustable through hole type headshell with OFC lead-wires.   Key Features: Aluminum headshell with hard anodized finish reduces unwanted vibration Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series. Adjustable cylinder enables precise azimuth and overhang setting Available in three weights: 13 g (AT-LH13H), 15 g (AT-LH15H), and 18 g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements

Audio-Technica AT-LH13H Headshell

13g adjustable through hole type headshell with OFC lead-wires.   Key Features: Aluminum headshell with hard anodized finish reduces unwanted vibration Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series. Adjustable cylinder enables precise azimuth and overhang setting Available in three weights: 13 g (AT-LH13H), 15 g (AT-LH15H), and 18 g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements

Audio-Technica AT-HS6 Headshell

9g headshell aluminium die cast body. AT-HS6 9g headshell aluminium die cast body - Die-cast aluminium body, Integral finger lift, Includes terminals quad wire and 1 pair of 10mm screws and 1 pair of 8mm screws.

Ortofon LH-4000 Headshell

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Audio-Technica AT6006R Tonearm Safety Raiser

AT6006R Tonearm Safety Raiser.   Key Features: Lifts tonearm automatically at the end of a record, protecting stylus tip Hydraulic lift with rubber lift bar operates safely and smoothly Can be mounted on a variety of turntables with different tonearm heights

Audio-Technica AT6108 Cartridge To Headshell Lead Wires

AT6108 Cartridge To Headshell Leadwires. Key Features: 6N-OFC 99.99997% high-purity oxygen-free copper 0.12mm x 29 core strand construction Damping material used in wire sheath (titanium compounded sheath)

Well Tempered Lab LTD Tonearm

LTD is a highly refined version of the Well Tempered Lab tonearm, featuring the new Symmetrex configuration.  

Audio-Technica AT-HS3 Headshell - Red

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Vivid red headshell design

Audio-Technica AT-LT13A Headshell

13g die cast aluminium body headshell.Key Features: Threaded headshell avoiding in use of nuts when fitting cartridge 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm) Includes gold plated terminals quad wire

Audio-Technica AT-LH18/OCC TechniHard Headshell

18g TechniHard™ adjustable headshell with AT6101 quad wire.Key Features: Adjustable overhang and adjustable azimuth (tilt) Threaded headshell avoiding in use of nuts when fitting cartridge 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm) 1 hexagon wrench (for overhanging and tilt adjustment)

Audio-Technica AT-LH15/OCC TechniHard Headshell

15g TechniHard™ adjustable headshell with AT6101 quad wire.   Key Features: Aluminum headshell with hard anodized finish reduces unwanted vibration Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series. Adjustable cylinder enables precise azimuth and overhang setting Available in three weights: 13 g (AT-LH13H), 15 g (AT-LH15H), and 18 g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements

Audio-Technica AT-LH13/OCC TechniHard Headshell

13g TechniHard™ adjustable headshell with AT6101 quad wire.Key Features: Adjustable overhang and adjustable azimuth (tilt) Threaded headshell avoiding in use of nuts when fitting cartridge 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm) 1 hexagon wrench (for overhanging and tilt adjustment)

Michell Locknut and VTA Adjuster Pack

Twin pack consisting of: Finger Locking nut (to suit Rega arms) A Vertical Tracking Angle adjustment sleeve for the Rega RB-250, RB-300 and RB-600 arms, to be used with the new-style Rega arm board Michell have been making since the beginning of 1999.  If used with other turntable brands, slight enlargement of the original Rega mounting hole will be necessary to accommodate the increased diameter of the VTA sleeve.

Michell Finger Locking Nut

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300.

Nottingham Analogue Ace Space Tonearm

The Ace Space Arm design uses side stabilizer bars and tiny ball bearing chases to maintain azimuth. Nottingham Analogue have also developed a proprietary damping material, the viscosity of which is such that it does not flow and does not require 'settling time'. This material is applied to the centre pivot and the stabilizer bars.

Ortofon APJ-1 Adaptor

The APJ-1 is a special adaptor for SPU-A houses that extends A-shell models to the standard GM-length.

Ortofon LH-10000 Headshell

The LH-10000 is a new exceptionally high quality headshell made using a high performance aluminium alloy with zinc as the primary alloying element. The Aluminium alloy is strong, with strength comparable to steel. The headshell has good fatigue strength and machinability, but offers more resistance to corrosion than many other Aluminium alloys.

Ortofon LH-2000 Headshell

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges.

Ortofon LH-6000 Headshell

The LH-6000 is a high quality headshell designed specifically for the Kontrapunkt series, Jubilee, MC Windfeld and Cadenza Series cartridges. Its rounded front portion facilitates proper mounting and compliments each of these cartridges.

Ortofon LH-9000 Headshell

Exceptionally high quality carbon fibre headshell, the LH-9000 is made using carbon fibre resin for the elimination of unwanted resonances. The LH-9000 is perfect for a variety of high-end cartridges.

Ortofon SPU N Adaptor

A headshell adaptor for SPU N Royal, SPU N Classic and SPU N Reference Gold.

Michell VTA Adjuster 1

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Ortofon LW-7N Headshell Cables

LW-7N is the hybrid lead wire made of Ultra high purity copper wire of 7N and 6 N. As there is no foreign particle other than copper 7N (99.99999 % purity) in the wire, music signal can be transmitted without any noise. The end of wire is fastened by rohdium plated terminal.

Ortofon LW-6N Headshell Cables

LW-6N is the 6N lead wire made of Ultra high purity copper wire, the configuration is very sophisticated with different diameter of wire strand, the inside strand is right windings, the outside strand is left winding. The tight winding against each other makes the clear transmission of music signals. Clear and crisp tonality. The end of wire is fastened by gold plated terminal.

Michell TecnoWeight

The TecnoWeight is a great upgrade for anyone with a compatible Rega tonearm. This easy to fit counter weight system is made from heavy stainless steel and aluminium.    Please Note: This is compatible with all Rega tonearms and derivatives, except RB100 series tonearms.

Ortofon LW-800S Headshell Cables

The LW-800S is the most sophisticated lead wires composed of pure silver and silver coated wire. The nature of silver wire, silver coated wire transmits the very clear high tone signals, it brings the brilliant tonality. The end of wire is fastened by rohdium plated terminal.

Nottingham Analogue Ace Anna Tonearm

The Ace Anna Arm design uses side stabilizer bars and tiny ball bearing chases to maintain azimuth. Nottingham Analogue have also developed a proprietory damping material, the viscosity of which is such that it does not flow and does not require 'settling time'. This material is applied to the centre pivot and the stabilizer bars.

Dynavector 6N Headshell Leads - Set Of 4

Dynavector's top quality 6N headshell links, made with very high purity copper wire, with tags that are Rhodium plated for high conductivity.

Nottingham Analogue Interspace Tonearm

The Interspace Tone Arm combines an ultra light weight carbon fibre arm tube with a damped uni-pivot bearing and is a scaled down version of the Ace Space arm.