Thorens TD 1601 Turntable with TP160 Tonearm

The Thorens TD 1601 builds on everything the TD 1600 offers, adding enhanced features for improved comfort and amplifier connectivity. It retains the classic wooden plinth, two-part platter with inner belt, thick rubber mat, powerful motor control unit, arm board, and acrylic dust cover, now complemented by balanced outputs and added conveniences for easier operation. The conical springs for the sub-chassis are now mounted at the bottom rather than on the top board. Additionally, a small but strong steel thread connects the sub-chassis to a steel pin at the base, preventing any lateral movement and allowing only vertical motion.   Key Features: Stabilized sub chassis on three conical springs Polished precision belt Two part platter Adjustable belt tension Electronical controlled motor Electrical lift Contactless auto shut off Balanced (XLR) and unbalanced (RCA) output Thorens precision tonearm TP 92 9"

Thorens TD1600 Turntable with TP160 Tonearm

The Thorens TD 1600 blends the brand's classic heritage with modern 21st-century technology. While it closely resembles the iconic 160 series with its traditional wooden plinth, two-part platter with an inner belt, thick rubber mat, arm board, and acrylic dust cover, it incorporates numerous innovations under the surface. This is supplied with the Thorens TP 160 9" radial tonearm. Key Features: Stabilized sub chassis on three conical springs Precision pivot bearing tonearm TP 160 with SME headshell connector Polished precision belt Two-part machined aluminium platter Adjustable belt tension Electronical controlled motor Manual lift True balanced (XLR) and (RCA) outputs External linear power supply TPN 1600

Thorens TD 1500 Turntable

In 1965, the Thorens TD 150, an inconspicuous little turntable, came on the market and thus started a technical revolution in record player manufacturing. For the first time, a spring-suspended sub-chassis with an inner platter driven by a flat belt was used in a mass-produced unit. The principle proved to be very successful and found many imitators in the years since. Like its famous predecessor, the new Thorens TD 1500, which will be operated purely manually, features a sub-chassis that decouples the turntable and tonearm shelf from the motor and frame by means of three conical springs. In contrast to the TD 150, these springs can be adjusted from above through corresponding holes in the platter, which makes correct adjustment much easier.Key Features: Sub chassis with three conical springs Belt drive with polished precision belt Massive 1.4 kg and 22mm-thick Die-cast aluminum platter Pre-installed cartridge Ortofon 2 M Bronze Electronical controlled motor balanced (XLR) and unbalanced (RCA) output Thorens precision tonearm TP 150

Thorens TD 403 DD Direct Drive Turntable

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model. Key Features: Stable and super silent direct drive THORENS TP 150 tonearm Detachable SME Headshell Massive 1.4 kg and 22mm-thick Die-cast aluminum platter Pre installed cartridge Ortofon 2 M Blue

Thorens TD 124 DD Direct Drive Turntable

With the new TD 124 DD, Thorens is reviving one of the most legendary turntables in the brand’s history. The original concept of the TD 124 has been massively improved upon, using modern approaches, and now offers an unparalleled playback quality. The original TD 124 was introduced in 1957 and has been used for decades in countless broadcast studios around the world. Ambitious music lovers also quickly discovered the highly precise turntable for themselves; a dedicated fan base has remained loyal to the TD 124 to this day. Key Features: High Precision Direct Drive Motor Electrical Lift TP124 Tonearm Removable Headshell (SME connector) Prepared for SPU Cartridge Balanced (XLR) and unbalanced (RCA) outputs External power supply