VPI Stylus Tracking Force Gauge

This digital gauge is VPI's most accurate gauge for calculating tracking force. It is simple to use and mimics the height of where a record would sit on the platter.

VPI Felt Turntable Mat

VPI's black slipmat.

VPI Finger Lift

A metal finger lift to both serve as a washer for your cartridge and area to grab and cue your tonearm onto your record.

VPI Crosscheck Spirit Level

The VPI Crosscheck Turntable Level is an effective and easy to use level. The crosscheck level allows two axes to be checked simultaneously, making levelling a quick and simple task. The small form factor allows quick measurements to be taken anywhere.

VPI Magic Lube Grease

1Oz. Plastic bottle of bearing lubricant for VPI turntables. You should re-lube your turntable bearing at least once a year to decrease wear. It also helps with speed regulation.

VPI JMW-12 Alignment Jig

The JMW alignment jig is a simple to use, accurate alignment jig for setting cartridge measurements It addresses the three most important factors of alignment: Proper Offset, Tracking, and Overhang.

VPI JMW-10 Alignment Jig

The JMW alignment jig is a simple to use, accurate alignment jig for setting cartridge measurements It addresses the three most important factors of alignment: Proper Offset, Tracking, and Overhang.

VPI JMW-9 Alignment Jig

The JMW alignment jig is a simple to use, accurate alignment jig for setting cartridge measurements It addresses the three most important factors of alignment: Proper Offset, Tracking, and Overhang.

VPI Stainless Steel Center Weight

VPI's Stainless Steel Record Center Weight will work with all VPI turntable models and most other turntable brands. This record clamp flattens the vinyl effectively while dissipating vibrations. It is able to help stabilize slightly warped records.

VPI Deluxe Delrin and Stainless Steel Record Clamp

VPI's deluxe record clamp flattens the vinyl effectively while dissipating vibrations. It is able to help stabilize slightly warped records.

VPI Standard Black Delrin Record Clamp

VPI's standard record clamp flattens the vinyl effectively while dissipating vibrations. It is able to help stabilize slightly warped records.

VPI Counterweight for Fatboy Tonearms

Counterweight for Fatboy tonearms.

VPI Counterweight for JMW Tonearms

Counterweight for JMW tonearms with a 0.5" diameter.

VPI Standard Drive Belt

VPI's standard drive belt for single belt turntables.

VPI HW-40 Black Edition Turntable

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Harry Weisfeld's 2012 "Classic Direct" direct drive turntable was an outstanding technical achievement, earning Stereophile Magazine's Class A+ rating. This award-winning table was loosely based on the VPI Classic Series table technology and included a thick aluminum plinth and armboard and an inverted platter bearing riding on a PEEK thrust disc. Combined with a cutting-edge BLDC direct drive motor, the CLASSIC DIRECT was created. The Classic Direct provided a stable, solid foundation for the music, allowing the listener to hear deeply into the recorded grooves to the treasures buried with-in!

VPI JMW-9 Metal Uni-Pivot Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Effective Mass: 10.2 - g Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36%

VPI FB-12 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 300 - mm Effective length: 313.0 - mm Effective mass: 12.5 - g Overhang: 13 - mm Offset angle: 17.37 - degrees Average RMS distortion: 0.267% Please Note: VTA base not included.

VPI FB-12 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 300 - mm Effective length: 313 - mm Overhang: 13 - mm Offset angle: 17.37 - degrees Average RMS distortion: 0.27% Please Note: VTA base not included.

VPI FB-10 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 258 - mm Effective length: 273.4 - mm Overhang: 15.4 - mm Offset angle: 19.98 - degrees Average RMS distortion: 0.31% Please Note: VTA base not included.

VPI FB-10 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 258 - mm Effective length: 273.4 - mm Effective mass: 10.7 - g Overhang: 15.4 - mm Offset angle: 19.98 - degrees Average RMS distortion: 0.311% Please Note: VTA base not included.

VPI FB-9 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36% Please Note: VTA base not included.

VPI FB-9 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Effective Mass: 10.2 - g Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36% Please Note: VTA base not included.

VPI Avenger Direct Turntable

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Based on VPI's known design of the Avenger Tripod Chassis, the Avenger Direct takes their Direct Drive technology and marries it with the Avenger Series. The Avenger design has always been known as a "sandbox" type of design giving the owner the ability to mount up to 3 arms at any length or manufacturer model. In addition the Avenger Direct uses Isolation from the Titan turntable with Pneumatic Air Suspension feet. Key Features: Fatboy Tonearm. Nordost Reference Wire. Direct Drive Motor. VTA Base on the Fly. Internal Circuitry and Power. Made in the USA.

VPI Avenger Turntable

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The Avenger is the first stage in the Reference table line-up. Key Features: The Avenger chassis is three layers of bonded acrylic/aluminum/acrylic with damping material between layers. 3 stainless steel corner posts for both isolation and tonearm mounting and for mechanical grounding (up to 3 will fit). The 300 RPM, 24 pole, AC synchronous motor is capable of high torque and quiet operation. The motor is installed in a separate aluminum and steel machined assembly. The Inverted bearing features a hardened stainless steel shaft, 60 Rockwell chrome hardened ball, spinning in a phosphor bronze bushing and sits on a PEEK thrust disc. The belt side load is placed at the center of the spinning bearing for zero teeter-totter effects. The 20 pound 6061 aluminum platter has an accuracy of +/- .001” in a 39” circumference. The motor pulley has an accuracy of +/- .0005” when leaving factory. JMW 12-3D with VPI pure copper wire.