Van den Hul Cartridge Tip Saver

The TIP SAVER protects your valuable sensitive cartridge from accidental damage during storage, transport… and domestic cleaning!  Suitable for our models:  DDT - II SpecialMC - TWO SpecialMC - 10 SpecialMC - One SpecialMC - One Super SpecialThe FrogThe Frog GoldThe Frog HO  

Van den Hul Cartridge Mounting Set

Van den Hul Cartridge Mounting Set: A small brush, specially designed for cleaning the tip. A very precise non-magnetic small screwdriver for cartridge mounting and alignment purposes. Dimensions: Blade / H / W / D = 3.0 / 58.5 / 6.5 / 6.5 mm. 4 non-magnetic stainless steel screws: 2 pcs. M2.5 x 5 mm + 2 pcs. M2.5 x 8 mm 2 nylon washers: Ø inside / Ø outside / D = 2.7 / 5.0 / 0.5 mm

Van den Hul Wooden Cartridge Box

A luxurious and robust wooden box intended for safe storage and transport of phono cartridges.

Van den Hul The Black Crimson Cartridge

The Crimson is a top performance custom handbuilt moving coil phono cartridge.  Specific characteristics for this great cartridge are a relatively high (0,65mV) output, gold coils, a Samarium-Cobalt magnet, extended channel separation and superb tracking ability. As the popularity of vinyl is reviving again, many requests came in to develop a High-end phono cartridge for a more affordable price than The Colibri. The Crimson is the result and probably one of the cartridges with the best value for money available. It is completely hand built by the Master himself and comes with a 200 hour service check-up, free of charge (for the original owner).

Van den Hul Spirit Level

Small accurate spirit level by dutch high end cable, phono cartridge manufacture Van Den Hul intended for tonearm and platter levelling purpose. Dimensions: H/W/D: 16/9/12.7 mm

Van den Hul The Bleep

Van Den Hul The Bleep is useful tool to help set up your audio equipment. Point it towards your equipment and listen for a Bleep which will tell you if there is any RF problems, The Bleep features adjustable sensitivity to help detect radio frequencies in your audio system.

Van den Hul Polarity Checker

The Polarity Checker is an unique device that will come in handy when fine-tuning your audio installation to minimise its residual ground currents. It is also a voltage, phase and cable-interruption checker that can be use-full with all kinds of other electrical appliances around the house as it has both direct and inductance test modes. No batteries!

Van den Hul A Tribute To Analog - LP

Beets Brothers – Lils Mackintosh – Hans Dulfer: A Tribute to Analogue This one of a kind LP is a top reference quality analogue recording. Its title reveals the true nature of this very special project: paying a respectful tribute to analogue Perfectly suited to demonstrate Van den Hul phono cartridges qualities It’s a live recording of jazz standards with excellent and devoted musicians doing what they do best with jazz standards. Hans Dulfer on sax, Lils Mackintosh on vocals and the Beets Brothers invite you to: Body and soul (J.Green) 6.57 Side AI remember Clifford (B. Golson) 6.05 Side ALike someone in love (J. van Heusen) 6.36 Side AA foggy day (G. Gershwin) 4.33 Side BLover man (R. Ramirez) 6.34 Side BOn a clear day (B. Lane) 6.06 Side BHow high the moon (N. Hamilton/M. Lewis) 4.03 Side B

Van den Hul The D-502 Hybrid RCA-RCA Interconnect

The D–502 Hybrid's sound quality is extremely detailed without any metallic character. The D–502 Hybrid is equipped with a centre steel wire to provide extra mechanical reinforcement and strain relief. This coated steel wire, can be soldered and used as an extra ground-lead. The total pulling force handling of just this centre wire is already more than 30 kg. RCA-RCA Pair

Van den Hul The Grasshopper III Moving Coil Cartridge

The GRASSHOPPER III is available in two versions: SLA Version: S = matched crystal Silver coils L = Low output (0.6 mV/channel) A = Alnico magnet GLA Version: G = matched crystal Gold coils L = Low output (0.6 mV/channel) A = Alnico magnet

Van den Hul The Frog Moving Coil Cartridge

Custom handbuilt moving coil cartridges with the coil of a GRASSHOPPER III and the frontpole and suspension of the GRASSHOPPER IV: the best cartridge available for its price. The FROG ® is available in three versions.

Van den Hul The MC-One Special Moving Coil Cartridge

A custom handbuilt moving coil cartridge; Special selected version of the MC – 10 Special with 0.65 mV/channel.

Van den Hul The MC-10 Special Moving Coil Cartridge

A custom handbuilt moving coil cartridge with VDH-type 1 tip, boron cantilever, matched crystal silver-wire coils and 0.65 mV/channel.

Van den Hul The D-501 RCA-RCA Tonearm Interconnect

Balanced Hybrid conductor, shielded, extremely flexible tonearm connection cable in metal and LSC (carbon) construction. With durable black HULLIFLEX outer jacket.

Van den Hul The D-501 Silver RCA-RCA Tonearm Interconnect

Same construction as the D-501 HYBRID, however, the two inner multistrand conductors are made of the highest grade Matched Crystal Silver. With durable black HULLIFLEX outer jacket. This cable is terminated with RCA-RCA connections.

Van den Hul The MSS-7 Tonearm Cable

A 36 gauge, 7 strand extremely flexible interconnect wire, available in 4 colours: transparent, blue, red and green. Each of the strands is made of a very high grade of Matched Crystal (MC) OFC with a dense and very pure silver coating.   How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m.  We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.

Van den Hul The Tracking Force Meter

Van Den Hul's digital tracking force meter gets your settings right with utmost precision. It is a valuable tool for the devoted enthusiast. With superlative accuracy and an appropriate range, this little meter stands out among the competition. It's easily calibrated and features a switchable display backlight and an auto power-off. Operating instructions are included.  Place the meter on your turntable platter, lower the cartridge's stylus gently on the center of the meter's weighting platter and check if your tracking force needs to be set.

Van den Hul CC 1.0 Cartridge Tags (Set Of 4)

Gold plated headshell wire connecting clip for cartridges with 1.0 mm. connecting pins (the standard dimension).

Van den Hul Headshell Links

The headshell link set is a high quality four lead wire set for the cartridge-to-headshell connection. Four color coded leads (red, blue, green and white) made of Van Den Hul's MCS – 300 solid core Matched Crystal Silver wire. Each lead is fitted with their heavy 24 carat gold plated connecting clips: The CC-1.0 with Ø 1.0 mm for the tone arm side and the CC-1.2 with Ø1.2 mm for the cartridge side. The total length per lead, including the connecting clips, is 5.4 cm. The wire length is 4.3 cm. Total length per lead including clips is 5.4 cm; wire length is 4.3 cm.

Van den Hul The MCS-150M Tonearm Cable

The MCS 150M consists of 7 individually insulated very pure matched crystal silver strands each 80 micron in diameter incl. insulation. Being less susceptible to bending damage, its thinner extruded strands give this multi-strand version even a better sound quality compared to the MCS 150S.   How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m.  We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require.

Van den Hul The Special Turntable Spindle Oil

Key Features: 30ml No mechanical contact between the spindle and the bearing bush. This flotation property minimises bearing noise and noticeable increases audio quality. Ø 1 micron microscopic spheres of zirconium oxide carry oxygen ions. This creates an actual physical separation between the spindle and the bearing bush. The oil viscosity alone reduces the friction between metal parts (spindle and bearing bush). It offers temperature stability and remains unadulterated through time and use. Perfect for higher clearance type platter spindle bearings. (For tighter clearances use Van Den Hul's TLF Type II)

Van den Hul CC 1.2 Cartridge Tags (Set Of 4)

Gold plated headshell wire connecting clip for cartridges with 1.2 mm. connecting pins (the standard dimension).

Van den Hul The Lower Friction Oil II

VDH's 'The Lower Friction' (TLF) is a broad spectrum applicable super oil, especially intended to reduce bearing friction by forming an extremely stable lubrication layer between mechanical parts. Their TLF oil types are particularly suitable for close fitting - tight clearance bearings. The oils offer a superior combination of high performance properties, like for instance a very high resistance against breaking or penetration of the oil film: they can handle a pressure of around 180 - 200 kg/cm² at around 350 degrees Celsius (662 °F) without breaking away. The oils have a viscosity of just one third to one quarter of that of water: they easily spread and build a steady nano-thin layer on each surface. They don't contain Teflon, graphite or any other particles, don't oxidize and don't age. The normal operating temperature ranges up to 175 degrees Celsius (347 °F).

Van den Hul The TAC Tone Arm Connector

Van Den Hul The TAC - Tone Arm Connector The TAC, with optional 90º or 180º profiles and gold plated contacts, secure a very high quality connection for your tone arm.  Five contacts with 24 carat gold plating over silver plating over copper plating. The contacts have a standard 270º / 5 pin DIN configuration.  The contacts are based on an adjustable Teflon disc which is able to cover any angle related to the connector housing. This way the optimal position towards the tone arm is always assured.  The 90º profile of the connector housing is designed to combine vertical mounting and horizontal cable exit. Additionally, both profiles offer enough room to have the cable wires pushed in after soldering.  The TAC is a perfect match for our tone arm cables D-501 HYBRID, D-501 SILVER HYBRID and, because of its special shape, the flat twin cable D-502 HYBRID.  Cable clamping is done by tightening the rear-nut of the 3 part construction of the connector housing. (If the TAC doesn’t fit in the tone arm socket… use sandpaper to slim the outer dimensions).  The color is black and the cable entrance dimensions are. 10.0 x 4.0 mm (w x h). 

Van den Hul The Solution Contact Treatment Fluid

The Solution has been developed for audio applications. It cleans, lubricates and protects contacts with time stable results and sound improvement (Van Den Hul apply it to all their interconnects before packing).