Audio-Technica AT-VM520xEB/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM520xEB/H combo kit features the AT-VM520xEB elliptical bonded dual moving magnet cartridge, which comes pre-mounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM520xEB is an updated model from the AT-VMx series, now featuring refined materials and design elements. These enhancements further improve the VM sound, delivering responsive playback that captures the full dynamism of musical expression. Ease of use is also enhanced with threaded inserts for simpler mounting and a V-cut stylus protector for precise stylus positioning. The 0.3 x 0.7 mil elliptical bonded stylus of the AT-VM520xEB tracks the record groove with accuracy for outstanding audio reproduction. AT-VM520xEB/H Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus 0.3 x 0.7 mil elliptical bonded stylus Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli AT-LT10 Universal Headshell Key Features Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record Mounting screws included

Audio-Technica AT-VM740xML/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM740xML/H combo kit features the AT-VM740xML microlinear dual moving magnet cartridge, which comes pre-mounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM740xML is part of the updated AT-VMx series, boasting new materials and design tweaks that enhance the VM sound. This results in highly responsive playback that's particularly adept at capturing the full dynamism of musical expression. AT-VM740xML Key Features AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils Centre shield plate between the left and right channels reduces crosstalk for clear stereo sound Die-cast aluminum housing reduces vibrations and resonance Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Aluminum tapered cantilever reduces mass near the stylus tip for quicker signal transmission Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models AT-LT10 Universal Headshell Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record

Audio-Technica AT-VM750xSH/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM750xSH/H combo kit features the AT-VM750xSH Shibata dual moving magnet cartridge, pre-mounted on the AT-LT10 universal 1/2"-mount headshell. As part of the updated AT-VMx series, the AT-VM750xSH incorporates material and design improvements that further enhance the VM sound**. This delivers responsive playback that's particularly sensitive to the dynamism of musical expression. AT-VM750xSH Key Features AT-VMx dual moving magnet cartridge with Shibata stylus Shibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortion Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminum housing reduces vibrations and resonance. Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application   AT-LT10 Universal Headshell Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record

Audio-Technica AT-VM740xML Dual Moving Magnet Stereo Cartridge

All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. The lightweight microlinear stylus of the AT-VM740xML precisely traces the record groove with incredible accuracy, delivering nuanced audio reproduction that elliptical and conical styli simply can't match. Key Features: AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Die-cast aluminum housing reduces vibrations and resonance Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Aluminum tapered cantilever reduces mass near the stylus tip for quicker signal transmission Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM745xML Dual Moving Magnet Stereo Cartridge

The new, lightweight microlinear stylus of the AT-VM745xML traces the record groove with incredible accuracy, delivering audio reproduction that elliptical and conical styli simply can't match. This nuanced reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminium pipe, leading to more accurate reproduction of dynamic musical passages. All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. Key Features: AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminium housing reduces vibrations and resonance Paratoroidal coils improve generating efficiency for enhanced channel separation,channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models

Audio-Technica AT-VM750xSH Dual Moving Magnet Stereo Cartridge

All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for greatly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. The new, lightweight Shibata stylus of the AT-VM750xSH provides greater surface contact with the record groove than an elliptical stylus. This results in the pickup of ultra-high frequencies with minimal abrasion and distortion. This nuanced audio reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminum pipe, leading to more accurate reproduction of dynamic musical passages. Key Features: AT-VMx dual moving magnet cartridge with Shibata stylus Shibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortion Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminum housing reduces vibrations and resonance. Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM760xSL Dual Moving Magnet Stereo Cartridge

The AT-VM760xSL is equipped with an ultra-lightweight special line contact stylus that traces the record groove with incredible accuracy and minimal abrasion. This nuanced audio reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminum pipe, leading to more accurate reproduction of dynamic musical passages. All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. Key Features: AT-VMx dual moving magnet cartridge with special line contact stylus Special line contact stylus traces the record groove with extreme accuracy, delivering premium high-frequency response and detailed spatial expression Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminium body reduces vibrations and resonance Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM520xEB Dual Moving Magnet Stereo Cartridge

Audio-Technica's new AT-VMx series premium dual moving magnet (MM) cartridges deliver a rich, detailed, and expansive sound. Designed to closely mirror the vinyl cutting head, they feature dual magnets for exceptional channel separation and extended frequency response. The VMx series incorporates material and design upgrades for refined sound. A paratoroidal coil generator with two coils per channel and a center shield plate reduces crosstalk, while PCUHD® copper wire enhances audio reproduction. Reduced coil turns improve transient response for remarkably clear and immediate sound. Ease of use is also enhanced with threaded inserts for simpler mounting and a V-cut stylus protector for precise stylus positioning. The 0.3 x 0.7 mil elliptical bonded stylus of the AT-VM520xEB tracks the record groove with accuracy for outstanding audio reproduction. Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with accuracy for outstanding audio reproduction Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models  

Audio-Technica AT-VM530xEN Dual Moving Magnet Stereo Cartridge

Audio-Technica's new AT-VMx series premium dual moving magnet (MM) cartridges deliver a rich, detailed, and expansive sound. Designed to mirror the vinyl cutting head, they use dual magnets for exceptional channel separation and extended frequency response. The VMx series features a paratoroidal coil generator with PCUHD® copper wire and reduced coil turns, resulting in improved efficiency, reduced crosstalk, and stunningly clear, immediate audio. The AT-VM530xEN model stands out with its lightweight 0.3 x 0.7 mil elliptical nude stylus, which reduces vibration system mass for better frequency response and less distortion than a bonded stylus. For user convenience, VMx cartridges include threaded inserts for easier mounting and a V-cut stylus protector for precise stylus positioning. Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus 0.3 x 0.7 mil elliptical nude stylus tracks the record groove with accuracy for outstanding audio reproduction Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM610xMONO Dual Moving Magnet Mono Cartridge

As its name suggests, the AT-VM610xMONO is specifically designed for playing mono records. Its dual magnets are internally connected to minimise record noise and produce a highly focused "centre" sound image, something stereo cartridges can't achieve. Like all VMx cartridges, the AT-VM610xMONO features PCUHD® (Pure Copper Ultra High Drawability), which results in richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to improve transient response. This allows the cartridge to react more quickly to signal changes, delivering stunningly clean music with lifelike immediacy. The AT-VM610xMONO's 0.6 mil conical bonded stylus precisely tracks the centre of the record groove for reliable performance and excellent fidelity. Key Features: AT-VMx dual moving magnet cartridge with 0.6 mil conical bonded stylus 0.6 mil conical bonded stylus tracks the centre of the record groove for reliable performance and excellent fidelity Paratoroidal coils improve generating efficiency for enhanced transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Mono body terminating left and right channels reduces surface noise Compatible with any turntable headshell that accepts 1/2" cartridges

Audio-Technica AT-VM670xSP Dual Moving Magnet Mono Cartridge

The AT-VM670xSP cartridge is specifically engineered for playing 78 RPM monaural records. Its dual magnets are internally connected to minimise record noise and produce a highly focused "centre" sound image, a distinct advantage over stereo cartridges. Like all VMx cartridges, the AT-VM670xSP utilises PCUHD® (Pure Copper Ultra High Drawability), which contributes to richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to enhance transient response, allowing the cartridge to react more quickly to signal changes. This delivers stunningly clean music with lifelike immediacy. The stylus's 3.0 mil curvature radius makes it an excellent choice for playing 78s from various eras. Key Features: AT-VMx dual moving magnet cartridge with 3.0 mil conical bonded stylus 3.0 mil conical bonded stylus designed for playing 78 RPM records Paratoroidal coils improve generating efficiency for enhanced transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three dimensional sound reproduction with excellent transient response Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Mono body terminating left and right channels reduces surface noise Compatible with any turntable headshell that accepts 1/2" cartridges

Audio-Technica AT-VM510xCB Dual Moving Magnet Stereo Cartridge

Audio-Technica's AT-VMx series of premium dual moving magnet (MM) cartridges offers enhanced warmth and realism, creating an expansive and detailed soundstage. The AT-VM510xCB model features a 0.6 mil conical bonded stylus for reliable tracking and durability. Mounting is simplified thanks to threaded inserts on each VMx cartridge body, requiring just two screws—ideal for integrated tonearms often found on high-end turntables. Additionally, a new V-cut in the stylus's flip-up protector provides a quick visual guide for precise stylus placement when lowering it onto a record. Key Features: AT-VMx dual moving magnet cartridge with 0.6 mil conical bonded stylus Conical stylus tracks the centre of the record groove for reliable performance and durability Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series

Audio-Technica AT-LT10 Universal Headshell

The AT-LT10 is a versatile ½"-mount headshell designed for 4-pin turntable cartridges, whether they have threaded inserts or not. Its elongated through holes enable precise cartridge positioning to ensure correct overhang and optimal tonearm length. Crafted from lightweight aluminum die-cast, the body effectively minimises vibrations, while the slip-resistant finger lift allows for precise stylus placement. The AT-LT10 features OFC (oxygen-free copper) lead wires and includes mounting screws, catering to professional needs. Key Features Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record Includes mounting screws

Audio-Technica AT-HS3 Headshell - Black

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Black headshell design

Audio-Technica AT-LPW50BTRW Wireless Manual Belt Drive Turntable

Audio-Technica’s AT-LPW50BT-RW wireless turntable provides optimal high-fidelity audio reproduction with the option of wired or Bluetooth® listening. The manual record player’s stunning rosewood-finished veneer adds to the turntable’s refined style, and also dampens low-frequency acoustic feedback to ensure you experience crystal clear, uninterrupted sound. Key Features: Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Motor features a speed-sensor system to maintain accurate platter rotation speed Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4(silver) universal 1/2"-mount headshell and AT-VM95E (black) Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus The AT-VM95Ecartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with rosewood-finished wood veneer Built-in switchable phono pre-amplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Audio-Technica AT-LPW50PB Manual Drive Belt Turntable

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM. Key Features: Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Motor features a speed-sensor system to maintain accurate platter rotation speed Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish High-isolation, height-adjustable feet Built-in switchable phono preamplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Audio-Technica AT-LPW40WN Manual Belt Drive Turntable

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM. Key Features: Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Motor features a speed-sensor system to maintain accurate platter rotation speed Fully manual operation Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer Built-in switchable phono pre-amplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Audio-Technica AT-HS4 Headshell

The AT-HS4 is a universal ½"-mount headshell designed for use with straight 4-pin tonearms.    Key Features: Universal ½"-mount headshell for 4-pin tonearms Ultra-lightweight aluminium die-cast body keeps vibration to the bare minimum Angled shape suitable for straight tonearms Finger lift enables precise stylus placement Includes lead wires and mounting screws

Audio-Technica AT-HS6 Headshell

9g headshell aluminium die cast body. AT-HS6 9g headshell aluminium die cast body - Die-cast aluminium body, Integral finger lift, Includes terminals quad wire and 1 pair of 10mm screws and 1 pair of 8mm screws.

Audio-Technica AT85EP P Mount Moving Magnet Cartridge

P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. AT85EP P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. 0.3 x 0.7 mil elliptical stylus, Aluminium Pipe Cantilever and Elliptical bonded diamond stylus.

Audio-Technica AT81CP P Mount Moving Magnet Cartridge

P-mount Dual Moving Magnet cartridge with conical bonded stylus. AT81CP P-mount Dual Moving Magnet cartridge with conical bonded stylus. 0.6 mil conical stylus, Bonded round shank diamond and Carbon Fibre Reinforced ABS cantilever.

Audio-Technica AT-HS3 Headshell - Red

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Vivid red headshell design