Audio-Technica AT-VM520xEB/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM520xEB/H combo kit features the AT-VM520xEB elliptical bonded dual moving magnet cartridge, which comes pre-mounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM520xEB is an updated model from the AT-VMx series, now featuring refined materials and design elements. These enhancements further improve the VM sound, delivering responsive playback that captures the full dynamism of musical expression. Ease of use is also enhanced with threaded inserts for simpler mounting and a V-cut stylus protector for precise stylus positioning. The 0.3 x 0.7 mil elliptical bonded stylus of the AT-VM520xEB tracks the record groove with accuracy for outstanding audio reproduction. AT-VM520xEB/H Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus 0.3 x 0.7 mil elliptical bonded stylus Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli AT-LT10 Universal Headshell Key Features Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record Mounting screws included

Audio-Technica AT-VM740xML/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM740xML/H combo kit features the AT-VM740xML microlinear dual moving magnet cartridge, which comes pre-mounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM740xML is part of the updated AT-VMx series, boasting new materials and design tweaks that enhance the VM sound. This results in highly responsive playback that's particularly adept at capturing the full dynamism of musical expression. AT-VM740xML Key Features AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils Centre shield plate between the left and right channels reduces crosstalk for clear stereo sound Die-cast aluminum housing reduces vibrations and resonance Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Aluminum tapered cantilever reduces mass near the stylus tip for quicker signal transmission Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models AT-LT10 Universal Headshell Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record

Audio-Technica AT-VM750xSH/H Dual Moving Magnet Stereo Cartridge with LT10 Headshell

The AT-VM750xSH/H combo kit features the AT-VM750xSH Shibata dual moving magnet cartridge, pre-mounted on the AT-LT10 universal 1/2"-mount headshell. As part of the updated AT-VMx series, the AT-VM750xSH incorporates material and design improvements that further enhance the VM sound**. This delivers responsive playback that's particularly sensitive to the dynamism of musical expression. AT-VM750xSH Key Features AT-VMx dual moving magnet cartridge with Shibata stylus Shibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortion Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminum housing reduces vibrations and resonance. Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application   AT-LT10 Universal Headshell Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record

Audio-Technica AT-VM740xML Dual Moving Magnet Stereo Cartridge

All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. The lightweight microlinear stylus of the AT-VM740xML precisely traces the record groove with incredible accuracy, delivering nuanced audio reproduction that elliptical and conical styli simply can't match. Key Features: AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Die-cast aluminum housing reduces vibrations and resonance Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Aluminum tapered cantilever reduces mass near the stylus tip for quicker signal transmission Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM745xML Dual Moving Magnet Stereo Cartridge

The new, lightweight microlinear stylus of the AT-VM745xML traces the record groove with incredible accuracy, delivering audio reproduction that elliptical and conical styli simply can't match. This nuanced reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminium pipe, leading to more accurate reproduction of dynamic musical passages. All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. Key Features: AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminium housing reduces vibrations and resonance Paratoroidal coils improve generating efficiency for enhanced channel separation,channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models

Audio-Technica AT-VM750xSH Dual Moving Magnet Stereo Cartridge

All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for greatly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. The new, lightweight Shibata stylus of the AT-VM750xSH provides greater surface contact with the record groove than an elliptical stylus. This results in the pickup of ultra-high frequencies with minimal abrasion and distortion. This nuanced audio reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminum pipe, leading to more accurate reproduction of dynamic musical passages. Key Features: AT-VMx dual moving magnet cartridge with Shibata stylus Shibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortion Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminum housing reduces vibrations and resonance. Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM760xSL Dual Moving Magnet Stereo Cartridge

The AT-VM760xSL is equipped with an ultra-lightweight special line contact stylus that traces the record groove with incredible accuracy and minimal abrasion. This nuanced audio reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminum pipe, leading to more accurate reproduction of dynamic musical passages. All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. Key Features: AT-VMx dual moving magnet cartridge with special line contact stylus Special line contact stylus traces the record groove with extreme accuracy, delivering premium high-frequency response and detailed spatial expression Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminium body reduces vibrations and resonance Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM520xEB Dual Moving Magnet Stereo Cartridge

Audio-Technica's new AT-VMx series premium dual moving magnet (MM) cartridges deliver a rich, detailed, and expansive sound. Designed to closely mirror the vinyl cutting head, they feature dual magnets for exceptional channel separation and extended frequency response. The VMx series incorporates material and design upgrades for refined sound. A paratoroidal coil generator with two coils per channel and a center shield plate reduces crosstalk, while PCUHD® copper wire enhances audio reproduction. Reduced coil turns improve transient response for remarkably clear and immediate sound. Ease of use is also enhanced with threaded inserts for simpler mounting and a V-cut stylus protector for precise stylus positioning. The 0.3 x 0.7 mil elliptical bonded stylus of the AT-VM520xEB tracks the record groove with accuracy for outstanding audio reproduction. Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with accuracy for outstanding audio reproduction Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models  

Audio-Technica AT-VM530xEN Dual Moving Magnet Stereo Cartridge

Audio-Technica's new AT-VMx series premium dual moving magnet (MM) cartridges deliver a rich, detailed, and expansive sound. Designed to mirror the vinyl cutting head, they use dual magnets for exceptional channel separation and extended frequency response. The VMx series features a paratoroidal coil generator with PCUHD® copper wire and reduced coil turns, resulting in improved efficiency, reduced crosstalk, and stunningly clear, immediate audio. The AT-VM530xEN model stands out with its lightweight 0.3 x 0.7 mil elliptical nude stylus, which reduces vibration system mass for better frequency response and less distortion than a bonded stylus. For user convenience, VMx cartridges include threaded inserts for easier mounting and a V-cut stylus protector for precise stylus positioning. Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus 0.3 x 0.7 mil elliptical nude stylus tracks the record groove with accuracy for outstanding audio reproduction Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM610xMONO Dual Moving Magnet Mono Cartridge

As its name suggests, the AT-VM610xMONO is specifically designed for playing mono records. Its dual magnets are internally connected to minimise record noise and produce a highly focused "centre" sound image, something stereo cartridges can't achieve. Like all VMx cartridges, the AT-VM610xMONO features PCUHD® (Pure Copper Ultra High Drawability), which results in richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to improve transient response. This allows the cartridge to react more quickly to signal changes, delivering stunningly clean music with lifelike immediacy. The AT-VM610xMONO's 0.6 mil conical bonded stylus precisely tracks the centre of the record groove for reliable performance and excellent fidelity. Key Features: AT-VMx dual moving magnet cartridge with 0.6 mil conical bonded stylus 0.6 mil conical bonded stylus tracks the centre of the record groove for reliable performance and excellent fidelity Paratoroidal coils improve generating efficiency for enhanced transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Mono body terminating left and right channels reduces surface noise Compatible with any turntable headshell that accepts 1/2" cartridges

Audio-Technica AT-VM670xSP Dual Moving Magnet Mono Cartridge

The AT-VM670xSP cartridge is specifically engineered for playing 78 RPM monaural records. Its dual magnets are internally connected to minimise record noise and produce a highly focused "centre" sound image, a distinct advantage over stereo cartridges. Like all VMx cartridges, the AT-VM670xSP utilises PCUHD® (Pure Copper Ultra High Drawability), which contributes to richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to enhance transient response, allowing the cartridge to react more quickly to signal changes. This delivers stunningly clean music with lifelike immediacy. The stylus's 3.0 mil curvature radius makes it an excellent choice for playing 78s from various eras. Key Features: AT-VMx dual moving magnet cartridge with 3.0 mil conical bonded stylus 3.0 mil conical bonded stylus designed for playing 78 RPM records Paratoroidal coils improve generating efficiency for enhanced transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three dimensional sound reproduction with excellent transient response Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Mono body terminating left and right channels reduces surface noise Compatible with any turntable headshell that accepts 1/2" cartridges

Audio-Technica AT-VM510xCB Dual Moving Magnet Stereo Cartridge

Audio-Technica's AT-VMx series of premium dual moving magnet (MM) cartridges offers enhanced warmth and realism, creating an expansive and detailed soundstage. The AT-VM510xCB model features a 0.6 mil conical bonded stylus for reliable tracking and durability. Mounting is simplified thanks to threaded inserts on each VMx cartridge body, requiring just two screws—ideal for integrated tonearms often found on high-end turntables. Additionally, a new V-cut in the stylus's flip-up protector provides a quick visual guide for precise stylus placement when lowering it onto a record. Key Features: AT-VMx dual moving magnet cartridge with 0.6 mil conical bonded stylus Conical stylus tracks the centre of the record groove for reliable performance and durability Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series

Ortofon MC 90X Moving Coil Cartridge

The Ortofon MC 90X is a premium, high-performance cartridge that elevates the quality and depth of your vinyl listening experience. Drawing from the iconic MC A90 design, it incorporates cutting-edge technologies such as the Wide Range Damping system, Replicant 100 diamond stylus, and a groundbreaking stainless-steel structure created through Selective Laser Melting. The outcome? Outstanding tracking precision, superb clarity, and an immersive sound with a rich midrange and extended frequency range. Finished in a striking blue, this limited-edition cartridge blends timeless craftsmanship with modern innovation. Key Features: Overhead-mount design for easy installation into a headshell Moving Coil (MC) cartridge configuration Premium nude Ortofon Replicant 100 diamond stylus High-quality boron cantilever State-of-the-art Selective Laser Sintering manufacturing technique

Ortofon 2M Mono Moving Magnet Cartridge

The 2M 78 and 2M Mono offer users of older, rare vinyl a higher-quality playback medium than had previously been available. Key Features: Optimised sound reproduction and high level of sonic accuracy R 18µm Nude Spherical stylus that is an optimal solution for playing mono microgroove LP vinyl records Uses a strapped output to deliver the same output signal from both sets of pole pins Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Also available with integrated headshell or verso version Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M 78 Moving Magnet Cartridge

The 2M 78 and 2M Mono offer users of older, rare vinyl a higher-quality playback medium than had previously been available. Key Features: Optimised sound reproduction and high level of sonic accuracy Spherical diamond that is perfect for playback of 78 rpm shellac records, which require a larger stylus profile Uses a strapped output to deliver the same output signal from both sets of pole pins Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Also available with integrated headshell or verso version Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M Black Moving Magnet Cartridge

The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus - the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high-frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear, and reduced distortion and phase error as a result of the diamond’s improved tracking geometry. Key Features: Improved engine, which provides an output of 5.5mV Optimised sound reproduction and high level of sonic accuracy Nude Shibata diamond, which is particularly suited for demanding applications Special upgraded 2M cartridge body, featuring split pole pins with a silver plated copper wire Split pole pins with a copper wire All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M Bronze Moving Magnet Cartridge

The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear. Key Features: Improved engine, which provides an output of 5.5mV Optimised sound reproduction and high level of sonic accuracy Nude Fine Line diamond, which is particularly suited for demanding applications Special upgraded 2M cartridge body, featuring split pole pins with a silver plated copper wire Split pole pins with a copper wire All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M Red Moving Magnet Cartridge

The 2M Red is designed for precise and accurate retrieval of the information in the record groove. Indeed, it is Ortofon's lasting philosophy to only ever play the recorded sound, without colouration. To obtain a flat frequency response, as with a Moving Coil cartridge, Ortofon are using split pole pins in the 2M design, to reduce the eddy current. The split pole pins are an Ortofon invention which was originally presented in the 500 and Super OM series, to great effect. Key Features: Improved engine, which provides an output of 5.5mV Optimised sound reproduction and high level of sonic accuracy Tipped Elliptical diamond Split pole pins with a copper wire All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M Blue Moving Magnet Cartridge

The 2M Red and 2M Blue are designed for precise and accurate retrieval of the information in the record groove. Indeed, it is Ortofon's lasting philosophy to only ever play the recorded sound, without colouration. To obtain a flat frequency response, as with a Moving Coil cartridge, Ortofon are using split pole pins in the 2M design, to reduce the eddy current. The split pole pins are an Ortofon invention which was originally presented in the 500 and Super OM series, to great effect. Key Features: Improved engine, which provides an output of 5.5mV Optimised sound reproduction and high level of sonic accuracy Nude Elliptical diamond Split pole pins with a copper wire All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Michell Cusis M Moving Coil Cartridge

The Cusis M offers the audiophile an ultra high-end listening experience at a cost which belies its ability. It's quite simply one of the most accurate and musical moving coil cartridges available at any price. All of Michell's Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge.

Michell Cusis S Moving Coil Cartridge

The Cusis S offers extended frequency response and incredible detail retrieval whilst retaining a level of musicality that is second to none.  All of Michell's Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge.

Michell Cusis E Moving Coil Cartridge

The Cusis E is the entry point of Michell's moving coil cartridge range, giving great detail and musicality, and never detracting from the music. All of Michell's Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge.

Lyra Etna SL Lambda Moving Coil Cartridge

Lyra again turns the analog world on its ear with the introduction of the Etna λ Lambda phono cartridge. Sharing its name with Sicily’s majestic Mount Etna, Etna λ Lambda the cartridge is an impressive monument in its own right, one that melds tried and true Lyra design tenets with designer Jonathan Carr’s very latest thinking on phono cartridges. Etna λ Lambda was designed with a strong emphasis on engineering efficiency, so that its performance would be as far beyond the sum of its parts as possible. For this reason, although it shares some of its design philosophy with Atlas λ Lambda, the concepts are executed rather differently.

Lyra Etna Lambda Moving Coil Cartridge

Lyra again turns the analog world on its ear with the introduction of the Etna λ Lambda phono cartridge. Sharing its name with Sicily’s majestic Mount Etna, Etna λ Lambda the cartridge is an impressive monument in its own right, one that melds tried and true Lyra design tenets with designer Jonathan Carr’s very latest thinking on phono cartridges. Etna λ Lambda was designed with a strong emphasis on engineering efficiency, so that its performance would be as far beyond the sum of its parts as possible. For this reason, although it shares some of its design philosophy with Atlas λ Lambda, the concepts are executed rather differently.

Lyra Atlas SL Lambda Moving Coil Cartridge

The Atlas λ Lambda is Lyra’s new flagship phono cartridge. Why asymmetric? By literally misplacing the “barriers” to great sound that are present in every other cartridge today, a number of important performance benefits are realized. First, different-shaped structures on the left and right sides of the cartridge body suppress the formation of standing waves within, resulting in a significant reduction of resonance-induced colorations. Second, the asymmetric construction offsets the front magnet carrier and its associated mounting system so that it is no longer in line with the cantilever assembly. This opens up a direct, solid path between the cantilever assembly and tonearm head shell so that vibrations from the cantilever can be quickly drained away once they have been converted into electrical signals, again suppressing induced resonances.

Lyra Atlas Lambda Moving Coil Cartridge

The Atlas λ Lambda is Lyra’s new flagship phono cartridge. Why asymmetric? By literally misplacing the “barriers” to great sound that are present in every other cartridge today, a number of important performance benefits are realized. First, different-shaped structures on the left and right sides of the cartridge body suppress the formation of standing waves within, resulting in a significant reduction of resonance-induced colorations. Second, the asymmetric construction offsets the front magnet carrier and its associated mounting system so that it is no longer in line with the cantilever assembly. This opens up a direct, solid path between the cantilever assembly and tonearm head shell so that vibrations from the cantilever can be quickly drained away once they have been converted into electrical signals, again suppressing induced resonances.

Ortofon MC Xpression Moving Coil Cartridge

The Xpression cartridge bridges the gap between SPU-type cartridges and High-End cartridges like the MC A90 and the MC Windfeld, which are designed for headshell mounting. The result is a high-performance moving coil cartridge with the convenience of a standard headshell connector. This method of connection provides a simple and elegant method of directly connecting the generator and tonearm via the Xpression’s one-piece body. The state of the art Ortofon Xpression cartridge represents the perfect combination of three distinct characteristics pioneered by Ortofon: Use of the cutting edge SLM materials, a technology pioneered on the MC A90 and SPU 90th Anniversary models. Modification of the all-new generator system introduced with the MC A90 and the MC Windfeld models. Ortofon's design tradition.

Audio-Technica AT85EP P Mount Moving Magnet Cartridge

P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. AT85EP P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. 0.3 x 0.7 mil elliptical stylus, Aluminium Pipe Cantilever and Elliptical bonded diamond stylus.

Audio-Technica AT81CP P Mount Moving Magnet Cartridge

P-mount Dual Moving Magnet cartridge with conical bonded stylus. AT81CP P-mount Dual Moving Magnet cartridge with conical bonded stylus. 0.6 mil conical stylus, Bonded round shank diamond and Carbon Fibre Reinforced ABS cantilever.

Grado Reference The Reference-2 High Output Moving Iron Cartridge

The Reference Series2 of wooden cartridges are hand-crafted at Grado Labs from a Australian Jarrah wood. An intricate procedure of curing is done between production steps to achieve optimal sonic quality. This series generator/stylus module is not replaceable allowing a redesigned one-piece magnetic circuit and a reduction of chassis resonances. The Reference Series2 utilizes manufacturing and assembly techniques that result is musical perfection. The Reference Series2 should be used with only the finest equipment. Recommended tracking force 1.5 to 1.9 grams.

Ortofon SPU Classic N E Moving Coil Cartridge

The SPU Classic N is a Moving Coil (MC) cartridge with an elliptical stylus profile and provides more detailed sound reproduction and expansive imaging.

Ortofon SPU Classic N Moving Coil Cartridge

The SPU Classic N is a Moving Coil (MC) cartridge with an 18µm spherical stylus profile.

Ortofon SPU Royal N Moving Coil Cartridge

The SPU Royal N provides a playback experience that embodies the essence of analog, with generous refinements which bring the legendary SPU cartridges into the realm of unrivaled perfection.