Audio-Technica AT-VM95EBK/H Moving Magnet Cartridge on AT-HS6 Headshell

VM95 series Elliptical stereo cartridge on AT-HS6 Headshell.   AT-VM95EBK/H VM95 series Elliptical stereo cartridge on AT-HS6 Headshell - AT-VM95E mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

Audio-Technica AT-VM95EBK Moving Magnet Cartridge

AT-VM95EBK VM95 series Elliptical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT95E and AT95EX.   Key Features: Aluminium cantilever 4.0mV output voltage Compatible body with all VM95 Series stylus assemblies Replacement for AT95E and AT95EX 20 to 22,000Hz frequency response

Grado Prestige Gold 3 T4P Moving Magnet Cartridge

The Gold3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.   Key Features: Hand-Built in Brooklyn Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Ultra High Purity Copper Coil Four Coil Unison De-Stressed Chasis Swiss Screw Machined

Shelter Model 201 Moving Magnet Cartridge

The Model 201 is MM (moving magnet) cartridge. Designed for affordability, the weight and output are matched for a wide selection of tone arms and tables. Unlike many MM cartridges, there is no “peak” so it is a pleasing and robust performer.

Ortofon 2M Mono Moving Magnet Cartridge

The 2M 78 and 2M Mono offer users of older, rare vinyl a higher-quality playback medium than had previously been available. Key Features: Optimised sound reproduction and high level of sonic accuracy R 18µm Nude Spherical stylus that is an optimal solution for playing mono microgroove LP vinyl records Uses a strapped output to deliver the same output signal from both sets of pole pins Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Also available with integrated headshell or verso version Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M 78 Moving Magnet Cartridge

The 2M 78 and 2M Mono offer users of older, rare vinyl a higher-quality playback medium than had previously been available. Key Features: Optimised sound reproduction and high level of sonic accuracy Spherical diamond that is perfect for playback of 78 rpm shellac records, which require a larger stylus profile Uses a strapped output to deliver the same output signal from both sets of pole pins Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Also available with integrated headshell or verso version Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M Black Moving Magnet Cartridge

The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus - the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high-frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear, and reduced distortion and phase error as a result of the diamond’s improved tracking geometry. Key Features: Improved engine, which provides an output of 5.5mV Optimised sound reproduction and high level of sonic accuracy Nude Shibata diamond, which is particularly suited for demanding applications Special upgraded 2M cartridge body, featuring split pole pins with a silver plated copper wire Split pole pins with a copper wire All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M Bronze Moving Magnet Cartridge

The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear. Key Features: Improved engine, which provides an output of 5.5mV Optimised sound reproduction and high level of sonic accuracy Nude Fine Line diamond, which is particularly suited for demanding applications Special upgraded 2M cartridge body, featuring split pole pins with a silver plated copper wire Split pole pins with a copper wire All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M Red Moving Magnet Cartridge

The 2M Red is designed for precise and accurate retrieval of the information in the record groove. Indeed, it is Ortofon's lasting philosophy to only ever play the recorded sound, without colouration. To obtain a flat frequency response, as with a Moving Coil cartridge, Ortofon are using split pole pins in the 2M design, to reduce the eddy current. The split pole pins are an Ortofon invention which was originally presented in the 500 and Super OM series, to great effect. Key Features: Improved engine, which provides an output of 5.5mV Optimised sound reproduction and high level of sonic accuracy Tipped Elliptical diamond Split pole pins with a copper wire All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Ortofon 2M Blue Moving Magnet Cartridge

The 2M Red and 2M Blue are designed for precise and accurate retrieval of the information in the record groove. Indeed, it is Ortofon's lasting philosophy to only ever play the recorded sound, without colouration. To obtain a flat frequency response, as with a Moving Coil cartridge, Ortofon are using split pole pins in the 2M design, to reduce the eddy current. The split pole pins are an Ortofon invention which was originally presented in the 500 and Super OM series, to great effect. Key Features: Improved engine, which provides an output of 5.5mV Optimised sound reproduction and high level of sonic accuracy Nude Elliptical diamond Split pole pins with a copper wire All-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7) Stylus brush included Premounted version is mounted on our popular SH-4 Black headshell Premounted version is easily and directly mountable on S-shaped tonearms with universal mount. Correct Baerwald alignment with tonearms with universal mount. 2M Verso: The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Audio-Technica AT-XP5/H Moving Magnet Cartridge on HS6 Headshell

AT-XP5 cartridge pre-mounted on the AT-HS6BK headshell and VM dual magnet construction. Key Features: Durable design for high-quality specialist DJ playback Cartridges designed for DJ venue applications for their Hi Fi audio Performance VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards Carbon ABS cantilever Great visibility of stylus tip for DJ use High-rigidity and Low-resonance cartridge housing Durable design for high-quality DJ playback Replacement Stylus: ATN-XP5

Audio-Technica AT-XP7 Moving Magnet Cartridge

Dual Moving Magnet Stereo DJ Cartridge. Key Features: Durable robust design for high-quality specialist DJ playback Cartridges designed for DJ venue applications for their Hi Fi audio Performance Great visibility of stylus tip for instant positioning in dark environments Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus Tapered aluminium cantilever Stainless wire suspension enables expressive higher frequency for clearer sound High-rigidity and Low-resonance cartridge housing Replacement Stylus: ATN-XP7

Audio-Technica AT-XP5 Moving Magnet Cartridge

Dual Moving Magnet Stereo DJ Cartridge. Key Features: Durable design for high-quality specialist DJ playback Cartridges designed for DJ venue applications for their Hi Fi audio Performance VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards Carbon ABS cantilever Great visibility of stylus tip for DJ use High-rigidity and Low-resonance cartridge housing Durable design for high-quality DJ playback Replacement Stylus: ATN-XP5

Grado Prestige Green 3 T4P Moving Magnet Cartridge

Both the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.   The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.   Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.   Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

Grado Prestige Green 3 Moving Magnet Cartridge

The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.   Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado Prestige Silver 3 Moving Magnet Cartridge

The Silver3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency.   Key Features: Hand-Built in Brooklyn Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Ultra High Purity Copper Coil Four Coil Unison De-Stressed Chasis Swiss Screw Machined

Ortofon 2M Black LVB 250 Moving Magnet Cartridge

The 2M Black LVB 250 builds on the concept of the original 2M Black cartridge design to take one step further toward true high-end sound. Redefining what is possible from a moving magnet (MM) cartridge, the 2M Black LVB 250 is truly an exercise in technical excellence. Key Features: Exclusive version of the 2M Black, built to celebrate the 250th anniversary of Ludwig Van Beethoven Nude Shibata diamond stylus, mounted on a boron cantilever Special upgraded engine, featuring split pole pins with a silver plated copper wire Detailed sound reproduction throughout the spectrum, including even the most high frequency groove information Reduced distortion and record wear Cartridge body made from highly rigid and resonance eliminating materials Remarkable transparency, speed and responsiveness New MWCNT-based compound, ensures better damping and improves the overall performance More environmentally-friendly production Easily compatible with an array of modern High-End equipment Exclusive LVB 250 design printed on the cartridge and stylus Replacement stylus available 2M Premounted: The 2M Premounted is a practical and elegant solution for those who require direct and easy mounting on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasises a slim and delicate form factor with a long finger lift that is easy to pick up. 2MR (Reduced): The "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, to achieve the correct VTA. 

Grado Prestige Gold 3 Moving Magnet Cartridge

The Gold3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.   Key Features: Hand-Built in Brooklyn Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Ultra High Purity Copper Coil Four Coil Unison De-Stressed Chasis Swiss Screw Machined

Sumiko Oyster Moving Magnet Cartridge

The bonded spherical stylus and rugged generator assembly of the Oyster makes it perfect for those seeking a cost-effective moving magnet cartridge that can be used in a wide range of applications. Our most affordable offering will still elevate the performance of nearly any entry-level turntable it adorns.

Sumiko Black Pearl Moving Magnet Cartridge

The Black Pearl incorporates a tried and reliable cartridge body with an improved cantilever and the same spherical stylus as the Oyster. This combination gives an overall richer output, including greater channel separation and a wider frequency response that pushes the listening experience to the next level.

Sumiko Rainier Moving Magnet Cartridge

Sumiko's first offering in the new Oyster line-up is the venerable Rainier, which continues the Pearl’s legacy for smooth, natural sound reproduction. After years of development, we are proud to introduce an all-new integrated body and generator system that significantly reduces internal resonances. With the ability to change to the Olympia or Moonstone stylus allows for upgrades with out replacing the entire cartridge.

Sumiko Olympia Moving Magnet Cartridge

The Olympia brings another level of acoustic refinement to the mix with an upgraded stylus and cantilever assembly, allowing for more dynamic punch and improved frequency response during playback. Due to its improved tracking capabilities, the Olympia is an excellent return on investment when upgrading from the Rainier cartridge, and can even be upgraded to the capable Moonstone stylus further on down the line.

Sumiko Moonstone Moving Magnet Cartridge

The Moonstone is an affordable high-performance moving magnet cartridge that utilises the powerful mechanically-generated electromotive forces of the moving magnet to help give your playback extra punch and convincing realism. Exceptionally well-balanced and dimensionally dense, the breathtaking dynamics of the Moonstone outperform many comparably priced moving coil cartridges without requiring the huge investment in preampfification.

Sumiko Amethyst Moving Magnet Cartridge

Easily Sumiko's most ambitious moving magnet cartridge to date, the Amethyst features a nude Line-Contact stylus and an upgraded generator assembly providing ultra-low noise, hair-raising dynamics, and superior tracking. This unique setup benefits from the same physically-generated electromotive forces fundamental to MM designs which accurately recreate the original sound of any recording. The Amethyst is an easy choice when looking for the most performance possible along with the versatility to pair well with nearly any phono stage on the market.

Ortofon OM 5 Super Moving Magnet Cartridge

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Ortofon OM 5S Moving Magnet Cartridge

The OM 5S features a spherical stylus, a robust and economic solution for play back of vinyl records.

Pro-Ject Pick-IT S2 Moving Magnet Cartridge

The Pro-Ject Pick it S2 MM is manufactured by the cartridge experts at Ortofon and voiced by the design team at Pro-Ject. Key Features: Moving Magnet principle Split pole pins enables frequency responses that compares very well to MC cartridges Strong cantilever based in high-end DJ cantilevers Suitable for low to medium tonearm masses 1/2 inch mounting standard High trackability Pick it S2 MM should be connected to phono MM inputs As with most MM cartridges, stylus may be exchanged

Audio-Technica AT-VM95SP/H 78RPM SP Moving Magnet Cartridge on AT-HS6 Headshell

VM95 series 78rpm SP cartridge on AT-HS6 Headshell.   AT-VM95SP/H VM95 series 78rpm SP cartridge on AT-HS6 Headshell - AT-VM95SP mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

Audio-Technica AT-VM95SH/H Shibata Moving Magnet Cartridge on AT-HS6 Headshell

VM95 series Shibata stereo cartridge on AT-HS6 Headshell.   AT-VM95SH/H VM95 series Shibata stereo cartridge on AT-HS6 Headshell - AT-VM95SH mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

Audio-Technica AT-VM95ML/H Moving Magnet Cartridge on AT-HS6 Headshell

VM95 series Microlinear stereo cartridge on AT-HS6 Headshell.   AT-VM95ML/H VM95 series Microlinear stereo cartridge on AT-HS6 Headshell - AT-VM95ML mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

Audio-Technica AT-VM95EN/H Moving Magnet Cartridge on AT-HS6 Headshell

VM95 series Elliptical Nude stereo cartridge on AT-HS6.   AT-VM95EN/H VM95 series Elliptical Nude stereo cartridge on AT-HS6 - AT-VM95EN mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

Audio-Technica AT-VM95E/H Moving Magnet Cartridge on AT-HS6 Headshell

VM95 series Elliptical stereo cartridge on AT-HS6 Headshell.   AT-VM95E/H VM95 series Elliptical stereo cartridge on AT-HS6 Headshell - AT-VM95E mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

Audio-Technica AT-VM95C/H Moving Magnet Cartridge on AT-HS6 Headshell

VM95 series Conical stereo cartridge on AT-HS6 Headshell.   AT-VM95C/H VM95 series Conical stereo cartridge on AT-HS6 Headshell - AT-VM95C mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

Audio-Technica AT-VM95SP 78RPM SP Moving Magnet Cartridge

AT-VM95SP VM95 series 78rpm SP cartridge - 3mil SP stylus for reduced record surface noise, Aluminium cantilever, 2.7mV output voltage and Compatible body with all VM95 Series stylus assemblies.   Key Features: 3mil SP stylus for reduced record surface noise Aluminium cantilever 2.7mV output voltage Compatible body with all VM95 Series stylus assemblies

Audio-Technica AT-VM95SH Shibata Moving Magnet Cartridge

AT-VM95SH VM95 series Shibata stereo cartridge - Aluminium cantilever, 3.5mV output voltage and Compatible body with all VM95 Series stylus assemblies.   Key Features: Aluminium cantilever 3.5mV output voltage Compatible body with all VM95 Series stylus assemblies 20 to 25,000Hz frequency response

Audio-Technica AT-VM95ML Microlinear Moving Magnet Cartridge

AT-VM95ML VM95 series Microlinear stereo cartridge - Aluminium cantilever, 3.5mV output voltage and Compatible body with all VM95 Series stylus assemblies.   Key Features: Aluminium cantilever 3.5mV output voltage Compatible body with all VM95 Series stylus assemblies 20 to 25,000Hz frequency response

Audio-Technica AT-VM95EN Moving Magnet Cartridge

AT-VM95EN VM95 series Elliptical Nude stereo cartridge - Aluminium cantilever, 3.5mV output voltage and Compatible body with all VM95 Series stylus assemblies.   Key Features: Aluminium cantilever 3.5mV output voltage Compatible body with all VM95 Series stylus assemblies 20 to 23,000Hz frequency response

Audio-Technica AT-VM95E Moving Magnet Cartridge

AT-VM95E VM95 series Elliptical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT95E and AT95EX.   Key Features: Aluminium cantilever 4.0mV output voltage Compatible body with all VM95 Series stylus assemblies Replacement for AT95E and AT95EX 20 to 22,000Hz frequency response

Audio-Technica AT-VM95C Moving Magnet Cartridge

AT-VM95C VM95 series Conical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT91, AT91R and CN5625AL.   Key Features: Aluminium cantilever 4.0mV output voltage Compatible body with all VM95 Series stylus assemblies Replacement for AT91, AT91R and CN5625AL

Audio-Technica AT85EP P Mount Moving Magnet Cartridge

P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. AT85EP P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. 0.3 x 0.7 mil elliptical stylus, Aluminium Pipe Cantilever and Elliptical bonded diamond stylus.

Audio-Technica AT81CP P Mount Moving Magnet Cartridge

P-mount Dual Moving Magnet cartridge with conical bonded stylus. AT81CP P-mount Dual Moving Magnet cartridge with conical bonded stylus. 0.6 mil conical stylus, Bonded round shank diamond and Carbon Fibre Reinforced ABS cantilever.

Grado Prestige Blue 2 Moving Iron Cartridge

Both the Blue2 and Red2 use a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.   Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.   Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

Goldring E3 Moving Magnet Cartridge

The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings.

Goldring E2 Moving Magnet Cartridge

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Goldring E1 Moving Magnet Cartridge

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

Sumiko Pearl Moving Magnet Cartridge

The Sumiko Pearl is a truly unique and precious find within the sea of entry-level phono cartridges. With decades of accolades to its name, the Pearl’s smooth, natural sound reproduction breathes life into any recording with poise and transparency. Its diminutive price also belies its colossal ability to pull a complete sonic picture from each record it touches.   Rounding off the budget series with style and aplomb, the Pearl is an affordable audiophile marvel that's sure to delight.   Key Features: Moving Magnet cartridge with Elliptical stylus Smooth, natural sound reproduction Alloy tube cantilever Overhead mounting design High output for easy matching to a phono stage Easy to set-up and install

Grado DJ200i Moving Magnet DJ Cartridge

The Prestige model DJ200i is a superior quality DJ Cartridge from Grado. It uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing.

Ortofon OM 5E Moving Magnet Cartridge

The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.

Goldring G1022GX Moving Magnet Cartridge

The 1022GX cartridge is recommended for the discerning listener as it uses a vital-shank, nude, diamond stylus. This polyhedral, line-contact diamond profile was chosen because it has a very low tip-mass and a large contact area whilst being very narrow from front to back, even enabling the undistorted retrieval of ultrasonic frequencies in a recording. A large contact area means that stylus and record wear are reduced and because it plays lower down in the groove than spherical types, older records may well gain a new lease of life.

Goldring G1042 Moving Magnet Cartridge

This is a cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The 1042 uses a nude, natural-diamond stylus with a Gyger S profile. This is a revolutionary line-contact type which is shaped to more closely resemble the record cutting head than any previous design. The stylus profile is the main factor governing overall sound quality in a cartridge and the shape of the Gyger S with its 6 µm radius allows it to trace the smallest groove detail with complete fidelity. Mid-range tonality is incredibly accurate and precise with high frequency sibilance banished. The extended side wall contact of the Gyger-S diamond also gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.

Goldring G1006 Moving Magnet Cartridge

This hand-built cartridge features a nude elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The natural diamond shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.

Goldring G1012GX Moving Magnet Cartridge

This hand-built cartridge uses the acclaimed Gyger II nude diamond stylus. A fine-line elliptical type with a 6 µm small radius it gives smooth, extended highs, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. Because it fills the record groove more completely due to its larger major radius, the Gyger II represents a major upgrade over normal elliptical stylus types.