Van den Hul Cartridge Tip Saver

The TIP SAVER protects your valuable sensitive cartridge from accidental damage during storage, transport… and domestic cleaning!  Suitable for our models:  DDT - II SpecialMC - TWO SpecialMC - 10 SpecialMC - One SpecialMC - One Super SpecialThe FrogThe Frog GoldThe Frog HO  

Van den Hul Cartridge Mounting Set

Van den Hul Cartridge Mounting Set: A small brush, specially designed for cleaning the tip. A very precise non-magnetic small screwdriver for cartridge mounting and alignment purposes. Dimensions: Blade / H / W / D = 3.0 / 58.5 / 6.5 / 6.5 mm. 4 non-magnetic stainless steel screws: 2 pcs. M2.5 x 5 mm + 2 pcs. M2.5 x 8 mm 2 nylon washers: Ø inside / Ø outside / D = 2.7 / 5.0 / 0.5 mm

Van den Hul Wooden Cartridge Box

A luxurious and robust wooden box intended for safe storage and transport of phono cartridges.

Van den Hul The Black Crimson Cartridge

The Crimson is a top performance custom handbuilt moving coil phono cartridge.  Specific characteristics for this great cartridge are a relatively high (0,65mV) output, gold coils, a Samarium-Cobalt magnet, extended channel separation and superb tracking ability. As the popularity of vinyl is reviving again, many requests came in to develop a High-end phono cartridge for a more affordable price than The Colibri. The Crimson is the result and probably one of the cartridges with the best value for money available. It is completely hand built by the Master himself and comes with a 200 hour service check-up, free of charge (for the original owner).

Van den Hul Spirit Level

Small accurate spirit level by dutch high end cable, phono cartridge manufacture Van Den Hul intended for tonearm and platter levelling purpose. Dimensions: H/W/D: 16/9/12.7 mm

Van den Hul The Isis RCA-RCA Tonearm Interconnect

The ISIS is a twin line RCA to RCA coaxial interconnect, especially designed to provide superior signal transfer quality between your high-end turntable and pre-amplifier at a very affordable price.   Where high-end turntables often are supplied with meagre interconnects, significant improvements in sound quality, resolution and imaging can be achieved by upgrading to The Isis.

Van den Hul The Grasshopper III Moving Coil Cartridge

The GRASSHOPPER III is available in two versions: SLA Version: S = matched crystal Silver coils L = Low output (0.6 mV/channel) A = Alnico magnet GLA Version: G = matched crystal Gold coils L = Low output (0.6 mV/channel) A = Alnico magnet

Van den Hul The Frog Moving Coil Cartridge

Custom handbuilt moving coil cartridges with the coil of a GRASSHOPPER III and the frontpole and suspension of the GRASSHOPPER IV: the best cartridge available for its price. The FROG ® is available in three versions.

Van den Hul The MC-One Special Moving Coil Cartridge

A custom handbuilt moving coil cartridge; Special selected version of the MC – 10 Special with 0.65 mV/channel.

Van den Hul The MC-10 Special Moving Coil Cartridge

A custom handbuilt moving coil cartridge with VDH-type 1 tip, boron cantilever, matched crystal silver-wire coils and 0.65 mV/channel.

Van den Hul The Tracking Force Meter

Van Den Hul's digital tracking force meter gets your settings right with utmost precision. It is a valuable tool for the devoted enthusiast. With superlative accuracy and an appropriate range, this little meter stands out among the competition. It's easily calibrated and features a switchable display backlight and an auto power-off. Operating instructions are included.  Place the meter on your turntable platter, lower the cartridge's stylus gently on the center of the meter's weighting platter and check if your tracking force needs to be set.

Van den Hul CC 1.0 Cartridge Tags (Set Of 4)

Gold plated headshell wire connecting clip for cartridges with 1.0 mm. connecting pins (the standard dimension).

Van den Hul Headshell Links

The headshell link set is a high quality four lead wire set for the cartridge-to-headshell connection. Four color coded leads (red, blue, green and white) made of Van Den Hul's MCS – 300 solid core Matched Crystal Silver wire. Each lead is fitted with their heavy 24 carat gold plated connecting clips: The CC-1.0 with Ø 1.0 mm for the tone arm side and the CC-1.2 with Ø1.2 mm for the cartridge side. The total length per lead, including the connecting clips, is 5.4 cm. The wire length is 4.3 cm. Total length per lead including clips is 5.4 cm; wire length is 4.3 cm.

Van den Hul CC 1.2 Cartridge Tags (Set Of 4)

Gold plated headshell wire connecting clip for cartridges with 1.2 mm. connecting pins (the standard dimension).