Van den Hul The Isis RCA-RCA Tonearm Interconnect

The ISIS is a twin line RCA to RCA coaxial interconnect, especially designed to provide superior signal transfer quality between your high-end turntable and pre-amplifier at a very affordable price.   Where high-end turntables often are supplied with meagre interconnects, significant improvements in sound quality, resolution and imaging can be achieved by upgrading to The Isis.

Van den Hul The Special Turntable Spindle Oil

Key Features: 30ml No mechanical contact between the spindle and the bearing bush. This flotation property minimises bearing noise and noticeable increases audio quality. Ø 1 micron microscopic spheres of zirconium oxide carry oxygen ions. This creates an actual physical separation between the spindle and the bearing bush. The oil viscosity alone reduces the friction between metal parts (spindle and bearing bush). It offers temperature stability and remains unadulterated through time and use. Perfect for higher clearance type platter spindle bearings. (For tighter clearances use Van Den Hul's TLF Type II)

Van den Hul The Lower Friction Oil II

VDH's 'The Lower Friction' (TLF) is a broad spectrum applicable super oil, especially intended to reduce bearing friction by forming an extremely stable lubrication layer between mechanical parts. Their TLF oil types are particularly suitable for close fitting - tight clearance bearings. The oils offer a superior combination of high performance properties, like for instance a very high resistance against breaking or penetration of the oil film: they can handle a pressure of around 180 - 200 kg/cm² at around 350 degrees Celsius (662 °F) without breaking away. The oils have a viscosity of just one third to one quarter of that of water: they easily spread and build a steady nano-thin layer on each surface. They don't contain Teflon, graphite or any other particles, don't oxidize and don't age. The normal operating temperature ranges up to 175 degrees Celsius (347 °F).