Hana EL MK II Moving Coil Cartridge

Building upon a decade of critical acclaim, the Hana E Series MK II elevates both value and performance by integrating trickled-down technological advancements from Hana’s flagship Umami and M Series cartridges. Handcrafted in Yokohama, Japan, by the master artisans at Excel Sound, the MK II represents the next step in analog refinement, delivering exceptional trackability, vibrant musicality, and effortless setup.

The EH (Elliptical High output) offers 2.0mv/1KHz output, if you require a lower output please see the EL MK II offers 0.4mV/1KHz.

Key Features:

• High-output (2mV/1KHz) moving coil generator, wired for direct use with a standard MM phono stage
• Brass cap body with threaded mounting holes, shared with the Hana M Series, for a more rigid tonearm fit
• Elastomeric body coating for additional mechanical resonance control
• Cryogenically treated yoke, pole pieces and gold-plated terminal pins for improved signal transfer
• Classic Alnico magnet and aluminium cantilever construction
• Synthetic elliptical diamond stylus

Hana EH MK II Moving Coil Cartridge

Building upon a decade of critical acclaim, the Hana E Series MK II elevates both value and performance by integrating trickled-down technological advancements from Hana’s flagship Umami and M Series cartridges. Handcrafted in Yokohama, Japan, by the master artisans at Excel Sound, the MK II represents the next step in analog refinement, delivering exceptional trackability, vibrant musicality, and effortless setup.

The EH (Elliptical High output) offers 2.0mv/1KHz output, if you require a lower output please see the EL MK II offers 0.4mV/1KHz.

Key Features:

• High-output (2mV/1KHz) moving coil generator, wired for direct use with a standard MM phono stage
• Brass cap body with threaded mounting holes, shared with the Hana M Series, for a more rigid tonearm fit
• Elastomeric body coating for additional mechanical resonance control
• Cryogenically treated yoke, pole pieces and gold-plated terminal pins for improved signal transfer
• Classic Alnico magnet and aluminium cantilever construction
• Synthetic elliptical diamond stylus

Dual CS 718Q Manual Turntable

The Dual CS 718Q continues the legendary tradition of Dual’s iconic 7 Series, combining reference-grade analog performance with German precision engineering and leading autolift convenience. Built with a completely vibration-free direct drive motor, dynamic mass-less tracking force, and a carbon-aluminum sandwich tonearm, the CS 718Q delivers incredible audio fidelity, stability, and ease of use. Developed in Dual’s dedicated Design Centre in Germany and backed by a 5-year warranty, it stands as a modern flagship designed to last for generations.

Key Features:

• Silent Direct Drive: Brushless motor with ironless air-core coils eliminates cogging and motor resonance completely.
• Classic Twin Gimbal Tonearm: Precision pivot ball bearings and twin gimbal mounting minimise micro-vibrations and tilting.
• Dynamic Tracking Force: High-precision German-made spiral spring ensures gravity-independent tracking, even on warped or off-level records.
• Carbon–Aluminum Sandwich Tonearm Tube: Offers maximum rigidity and resonance control with integrated precise height adjustment (+5 mm / -2 mm).
• Autolift & Auto-Stop Comfort: Preserves stylus life with automated tonearm lifting at the end of playback.
• Interchangeable Headshell: Features a screw-lock mechanism and azimuth adjustment for cartridge swaps in under a minute.
• Heavy Anti-Resonance Platter: 2.2 kg precision die-cast aluminum platter with a 4 mm heavy rubber mat and underside dampening coating.
• Premium Heavy MDF Plinth: Mounted on height-adjustable elastomer feet with integrated resonance absorbers; available in Satin Black or Real Walnut Veneer.
• 5-Year Warranty: Developed and engineered in Germany for long-term reliability and peace of mind.

Rega Turntable Wall Bracket Adaptors 2012 - Customer Return

Please Note: This listing is for a customer return meaning that the product has been opened.

Aluminium push fit adaptors for the Rega turntable wall bracket allowing both the RP8 and RP10 to be used with the bracket.

Please note : These adaptors only fit the older style Rega wallbracket - new adaptors are available for the current 2016 wall bracket.

Ortofon MC X50 Moving Coil Cartridge

Engineered for absolute audio perfection, the MC X50 stands as the crown jewel of the MC X Series. At its core is a nude Micro Ridge diamond stylus, precision-crafted with an exceptionally narrow side radius to deliver flawless tracking accuracy, reduced inner-groove distortion, and unmatched longevity.

Paired with an ultra-rigid boron cantilever, the MC X50 achieves breathtaking transient response, surgical resolution, and near-zero distortion. Complete with a custom-formulated, newly developed rubber suspension system, this cartridge is meticulously tuned to bring out the absolute best in your vinyl collection.

Key Features:

• Pure Silver Coil System
• Newly developed rubber suspension
• Moving Coil cartridge design
• Nude Micro Ridge Stylus
• Superior boron cantilever

Rega Fono MC MK4 Moving Coil Phono Preamplifier - Customer Return

Please note: This is a one time listing for an ex-demonstration unit at a discounted price, please note there are substantial marks to the front of the unit.

The Fono MC MK4 is an exceptionally high quality MC phono stage designed to maximise the potential of any low output MC cartridge. Although specifically designed to compliment the latest Rega range of moving coils you will find full adjustability for gain and loading via dip switches conveniently placed on the rear panel making the Fono MC MK4 compatible with a wide range of third party low output MC cartridges. Now housed in a brand new redesigned case to match the new Fono MM MK5 and Neo MK2 and Rega’s latest range of electronic components offering a modern look guaranteed to integrate in to any hi-fi system.

Key Features:

• Dedicated moving coil phono stage
• Simple connectivity and operation
• Fully adjustable via DIP switches via rear panel
• MUSE operational amplifier used in RIAA equalization amplifer
• Two selectable gain settings
• Default factory settings matched for all Rega MC models
• Latest design custom casework
• Lifetime warranty against manufacture defects

Ortofon Premium Libelle Spirit Level

Accurate levelling is the critical starting point for high-fidelity vinyl playback, as even minor deviations can compromise tracking performance and channel balance. Developed by Ortofon, the Premium Libelle is engineered to deliver precise horizontal alignment for your turntable. It provides a full 360-degree overview with 1-degree precision, allowing you to fine-tune your setup with absolute confidence.

Precise levelling is essential for optimal tonearm performance; it ensures accurate tracking, reduces distortion, and minimises unnecessary record and stylus wear.

Shelter 501 III Moving Coil Cartridge - Ex-Demo

Please Note: This is a one time listing for an ex-demonstration unit at a discounted price, please note there maybe cosmetic imperfections.

The Shelter 501 III MC phono cartridge is the latest development of the 501 series. Through continued refinement, the 501 III is equally responsive to the most recent recordings or any of your most cherished albums. The 501 III has a combination of an aluminium-clad boron cantilever and an elliptical diamond stylus tip. The expressiveness, power and energy fare superbly balanced to the highest level.

Nagaoka Inner Sleeves

50-Pack Anti-Static Record Sleeves - Protect your vinyl collection from dust, dirt, and static buildup. Specially treated with an anti-static finish, these premium sleeves allow your records to slide in and out smoothly, preventing scratches and ensuring a seamless, friction-free experience every time you play.

Nagaoka JN-P700 Stylus

The Nagaoka JN-P700 is the genuine factory replacement stylus designed specifically for the flagship Nagaoka MP-700 phono cartridge. Crafted with meticulous Japanese precision, this replacement stylus restores your turntable to its peak performance, delivering the breathtaking clarity, warmth, and detail you fell in love with.

Stylus Specifications:

• Compatibility: Nagaoka MP-700 / MP-700H Cartridges
• Stylus Type: Precision Polished Diamond
• Tracking Force Range: 1.3g – 1.8g, Recommended: 1.5g

Nagaoka MP-500 Cartridge

As Nagaoka’s top-of-the-line cartridge, the MP-500 delivers unparalleled clarity and an immersive sound quality that makes you feel as though you are standing right on an orchestra's podium. Engineered to work best with superior Hi-Fi components, this cartridge features exclusive high-fidelity performance driven by a superfine polished line-contact diamond stylus tip and a low-mass, high-strength boron cantilever. Its premium construction is rounded out by a powerful samarium cobalt magnet, a carbon-fibre-reinforced plastic pole shoe, and an anti-ferro-magnetic permalloy shield casing, ensuring an elite, ultra-precise audio experience.

Technical Specifications

• Output voltage: 3 mV(5 cm/sec)
• Frequency response: 20-25,000 Hz
• Channel seperation: 27 dB(1 K Hz)
• Channel balance: 1.0 dB or less
• Load Impedance: 47 KΩ
• Load Capacitance: 100 pF
• Vertical Tracking Force: 1.3-1.8g
• Cantilever: Boron
• Stylus tip: line-contact naked diamond

Nagaoka JN-P500 Stylus

The Nagaoka JN-P500 is the genuine factory replacement stylus designed specifically for the critically acclaimed Nagaoka MP-500 phono cartridge. Precision-engineered in Japan, this stylus is the key to restoring your turntable's elite tracking capabilities, legendary warmth, and astonishing detail.

Stylus Specifications:

• Compatibility: Nagaoka MP-500 / MP-500H Cartridges
• Stylus Type: Line-contact naked diamond
• Tracking Force Range: 1.3g – 1.8g

Nagaoka MP-300 Cartridge

The MP-300 is an advanced technology cartridge engineered for superior record groove recovery, featuring a superfine polished elliptical diamond stylus tip mounted on a low-mass, high-strength boron cantilever. Its sophisticated architecture includes a powerful samarium cobalt magnet, a carbon-fibre-reinforced plastic pole shoe, and an anti-ferro-magnetic permalloy shield casing. Together, these premium components deliver exceptional spatial imaging and acoustic accuracy, precisely replicating the positions of individual jazz players and orchestra instruments alike.

Technical Specifications

• Output voltage: 3 mV(5 cm/sec)
• Frequency response: 20-25,000 Hz
• Channel seperation: 25 dB(1 K Hz)
• Channel balance: 1.0 dB or less
• Load Impedance: 47 KΩ
• Load Capacitance: 100 pF
• Vertical Tracking Force: 1.3-1.8g
• Cantilever: Boron
• Stylus tip: 0.4 x 0.7 mil elliptical naked diamond

Nagaoka MP-200 Cartridge

The MP-200 delivers an organic, fluid presentation characterised by rich, mellow tones and a remarkably natural rendering of vocals and instruments. Boasting well-balanced fidelity across its entire dynamic range, it is the perfect companion for the intricate nuances of classical and jazz music.

Technical Specifications

• Output voltage: 4 mV(5 cm/sec)
• Frequency response: 20-23,000 Hz
• Channel seperation: 25 dB(1 K Hz)
• Channel balance: 1.5 dB or less
• Load Impedance: 47 KΩ
• Load Capacitance: 100 pF
• Vertical Tracking Force: 1.5-2.0g
• Cantilever: Boron
• Stylus tip: 0.4 x 0.7 mil elliptical naked diamond

Nagaoka JN-P200 Stylus

Rediscover the depth, warmth, and energy of your record collection. The Nagaoka JN-P200 is the genuine factory replacement stylus designed specifically for the highly acclaimed Nagaoka MP-200 phono cartridge. Precision-crafted in Japan, this stylus restores your cartridge to its original brilliance, delivering the vivid clarity and exceptional musicality that vinyl enthusiasts crave.

Stylus Specifications:

• Compatibility: Nagaoka MP-200 / MP-200H Cartridges
• Stylus Type: 0.4 x 0.7 mil elliptical naked diamond
• Tracking Force Range: 1.5g – 2.0g

Nagaoka JN-P110 Stylus

Bring the magic back to your turntable setup. The Nagaoka JN-P110 is the genuine factory replacement stylus designed specifically for the legendary Nagaoka MP-110 phono cartridge—widely considered the undisputed champion of price-to-performance audio. Precision-crafted in Japan, this stylus restores the warmth, punch, and musicality that made your cartridge an instant classic.

Stylus Specifications:

• Compatibility: Nagaoka MP-110 / MP-110H Cartridges
• Stylus Type: 0.4 x 0.7 mil elliptical bonded diamond
• Tracking Force Range: 1.5g – 2.0g

Pro-Ject Cover-IT Artist Dust Cover

The Cover-it-RS is an acrylic dust cover designed to fit over your record player with a cutout for cables on the back, protecting it from dust and other environmental risks when not in use.

Compatible Turntables:

• AC/DC Turntable
• The Dark Side Of The Moon Turntable
• Metallica Turntable
• Yellow Submarine Turntable

Technical Specifications:

• Material: Acrylic
• 636 x 180 x 476 mm (Outside Dimensions)
• 628 x 176 x 468 mm (Inside Dimensions)
• Weight: 3.2 kg

Please Note: This item may come with a protective plastic film both on the inside and outside of the lid that should be removed before use.

*Turntable not included

Pro-Ject Cover it RS Dust Cover

The Cover-it-RS is an acrylic dust cover designed to fit over your record player with a cutout for cables on the back, protecting it from dust and other environmental risks when not in use.

Compatible Turntables:

• Signature 12.2

Technical Specifications:

• Material: Acrylic
• 620 x 240 x 525 mm (Outside Dimensions)
• 600 x 235 x 510 mm (Inside Dimensions)
• Weight: 4.3 kg

Please Note: This item may come with a protective plastic film both on the inside and outside of the lid that should be removed before use.

*Turntable not included

Pro-Ject Cover it DS Dust Cover

The Cover-it-DS is an acrylic dust cover designed to fit over your record player with a cutout for cables on the back, protecting it from dust and other environmental risks when not in use.

Compatible Turntables:

• Signature 10
• RPM 5 / 9 / 10 Carbon

Technical Specifications:

• Material: Acrylic
• 525 x 290 x 425 mm (Outside Dimensions)
• 465 x 130 x 380 mm (Inside Dimensions)
• Weight: 4.3 kg

Please Note: This item may come with a protective plastic film both on the inside and outside of the lid that should be removed before use.

*Turntable not included

Audio-Technica AT607b EU Stylus Cleaning Fluid

AT607b stylus cleaning fluid - 12ml volume.

The AT607 stylus cleaning fluid extends both stylus and record life. The special cleaning formula dissolves dust and dirt known to hinder proper tracking. An applicator brush is attached to the cap for ease of use.

Key Features:

• Remove dust from stylus
• Contains quick-drying fluid
• Easy to use brush on the back side of the cap

Audio-Technica AT-VMN20xEB Replacement Stylus Elliptical Bonded - Customer Return

Please Note: This listing is for a customer return meaning that the product has been opened and used.

VMNX20CB Replacement stylus for AT-VM520xEB.

Key Features:

• Elliptical Bonded Stylus
• Tracking force 1.8 to 2.2 g (2.0 g standard)

Rega Planar 6 RS Turntable

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation.

The Rega Planar 6 RS Edition represents a significant leap in performance, bridging the gap between the standard Planar 6 and the high-end Planar 8. This "Rega Special" edition retains the classic form factor and dustcover but incorporates elite engineering usually reserved for the tier above. Built on an ultra-lightweight Tancast 8 foam core plinth with a unique aluminum HP laminate skin, it provides a rigid, low-resonance foundation for its advanced components. The RS Edition comes factory-fitted with the precision RB880 tonearm and the multi-award-winning Nd9 moving magnet cartridge, both expertly aligned for immediate high-fidelity playback. Accuracy is further enhanced by a hand-tuned 24v motor driving an aluminum sub-platter via a CNC twin drive pulley and dual Reference EBLT drive belts, all governed by the included Neo MK2 PSU.

Key Features: 

• RB880 tonearm with custom stainless balance weight
• Nd9 Reference MM factory fitted as standard
• CNC Twin drive motor pulley
• Tancast 8 foam core plinth with HP laminate and metal skin
• Dual Layer float glass Opti-white clear glass platter
• Custom matched Neo Mk2 turntable power supply
• Twin Reference EBLT drive belts
• 24v low noise synchronous low voltage precision motor
• Double Brace Technology
• Smoked dustcover
• Lifetime warranty against manufacture defects

Sumiko Oriole Low Output Moving Coil Cartridge

The Oriole upholds the refined, fatigue-free tonal balance that has made Sumiko a global benchmark. By integrating a low-impedance generator with a nude Shibata line-contact stylus, the Oriole represents a significant evolution from the Songbird, rivaling the legendary performance of the Starling.

It delivers impeccable tracking and an emotionally charged dynamic range, characterised by lightning-fast transients and a sophisticated, "sweet" resolution. Wholly analog in nature, the Oriole renders music with a natural sense of ambiance and cohesion. Operating with near-silent groove noise, it allows music to emerge from a stark, "black" background, inviting the listener into an expansive and intimate soundstage.

Key Features:

• Low Output Moving Coil
• Nude Shibata Natural Diamond Stylus
• Output (3.54cm/sec @ 1kHz): 0.3mV
• Cartridge Mass: 7.3g

 

Dual CS 418 Manual Turntable - Customer Return

Please note: This is a customer return item, however the item has not been opened/used. There is slight damage on the box but this is only superficial. 

Emphasis on high component precision is a feature of the entire range of Dual products. This is the case for the entry model CS 418, which uses the same platform as the higher models in the product range.

Key Features:

• Switchable built-in MM phono stage
• Ortofon 2M Red Cartridge
• Folded MDF construction with a black vinyl veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platter bearing with a hardened steel spindle in a brass bushing
• Solid aluminium construction with ball-bearings
• Damped tonearm lift
• Adjustable tracking force and anti skating
• Low vibration DC-Servo-Motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter