Tonar 1229 replacement stylus for ADC R-SQ 30 cartridge.
Tonar replacement stylus for Cosmo Cosmos, G-30, G-62, M-23,Conver B-60 and B-100.
The record adaptor has been designed to be used with your 45rpm records that no longer have the centres, enabling you to play your old favourites. The adaptor is simply fitted over the spindle of your turntable and the record will fit the outside of the adaptor. Then simply sit back, switch on and enjoy the music.
4613 Gold Plated Cartridge Terminal Pins
Tonar 4613. Gold Plated Cartridge Terminal Pins.
6175-DS Ricatech ND-1801 Stylus
Tonar 6175DS. This is a Ricatech ND-1801 stylus copy.
6259DN Sanyo ST-09D 78rpm Stylus
Tonar 6259DS replacement 78rpm stylus for Sanyo MG 09. This is a Sanyo ST-09D stylus copy.
Tonar 6259DS replacement stylus for Sanyo MG 09. This is a Sanyo ST-09D stylus copy.
Dynavector's top quality 6N headshell links, made with very high purity copper wire, with tags that are Rhodium plated for high conductivity.
Pulley Kit for playing 78 RPM records. The 78 RPM kit contains a different belt and pulley (but does not include an alternative stylus or cartridge), in order to play 78 RPM records on Pro-ject turntables. Please note that by using this kit you will lose the ability to play at 45 RPM. You will need a suitable stylus to play 78 RPM records.
940 DS National EPS-24 CS Stylus
Tonar replacement stylus for National, Panasonic, Technics EPS-24-CS, National, Panasonic, Technics EPC-P-24, Grundig, Schneider P-24.
The AC 16V / 500mA is a Pro-Ject replacement power supply and can be used on the following devices: All Pro-Ject Turntables with external power supply up to 2012 (except Genie MK 1, Debut Carbon Esprit SB & Xtension) Speed Box II The Phono Box (original) Phono Box II Phono Box USB
Adjust-IT Tonearm Bearing Adjustment Tool
Precision machined tonearm bearing fine adjustment tool. Fits all Pro-Ject tonearms and allows qualified personnel to optimise bearing adjustment, when bearings are misadjusted, because of unassured transport of a turntable.
Custom made high-quality Advanced EBLT drive belt.
Precision-milled aluminium clamp holds records securely in-place during cleanings.Please Note: This clamp is designed to be used on Okki Nokki record cleaning machines only and is not suitable for turntables.
Aluminium Stroboscope Disc 10cm
Records over the years have been cut at many different speeds. Originally, they were cut at '78 RPM' or speeds around that value. Later the industry decided to cut all records at 33 ½ or 45 RPM. For speech recordings even slower speeds were used in order to increase the amount of time recorded on each side of the record: 16 ½ and 8 ½ RPM. Of course you want to enjoy a recording at the correct tempo, but sometimes record players do not play at the proper speed and need adjusting. For that purpose Tonar now offers an Aluminium stroboscope disc of 10 cm diameter with the speeds 8 ½, 16 ½, 33 ½, 45 and 78 RPM.
Amplifier Binding Posts - Pack of 4
Please Note: This listing is for a pack of 4. Gold-plated ultra high quality speaker terminal, for amplifier.
Please Note: This weight is supplied pre-attached to the fishing wire. The anti-skate weight is attached to a thin fishing wire that hooks onto the rear of most Pro-Ject tonearms and hangs over the anti-skate hoop. This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination for the arm to 'skip' or 'skate' across the record.
Anti-Static Carbon Fibre Record Brush
Effortlessly removes unwanted dust, dirt, or small particles from your vinyl records, whilst effectively reducing any static charges. Simply use a circular motion around your record to get in the grooves.
Archival Record Outer Sleeves (Pack of 50)
Safeguard your vinyl LP jackets from wear, scuffs, and debris with archival-quality record outer sleeves: 4mil protective sleeves help keep album covers in pristine condition.
Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Black headshell design
Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Vivid red headshell design
The AT-HS4 is a universal ½"-mount headshell designed for use with straight 4-pin tonearms. Key Features: Universal ½"-mount headshell for 4-pin tonearms Ultra-lightweight aluminium die-cast body keeps vibration to the bare minimum Angled shape suitable for straight tonearms Finger lift enables precise stylus placement Includes lead wires and mounting screws
9g headshell aluminium die cast body. AT-HS6 9g headshell aluminium die cast body - Die-cast aluminium body, Integral finger lift, Includes terminals quad wire and 1 pair of 10mm screws and 1 pair of 8mm screws.
13g die cast aluminium body headshell.Key Features: Threaded headshell avoiding in use of nuts when fitting cartridge 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm) Includes gold plated terminals quad wire
AT-VM95C Moving Magnet Cartridge
AT-VM95C VM95 series Conical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT91, AT91R and CN5625AL. Key Features: Aluminium cantilever 4.0mV output voltage Compatible body with all VM95 Series stylus assemblies Replacement for AT91, AT91R and CN5625AL
AT-VMN95C VM95 series Conical replacement stylus. Key Features: Aluminium cantilever Conical stylus Bonded Round Shank
AT-VMN95E VM95 series Elliptical replacement stylus. Key Features: Aluminium cantilever Elliptical stylus Bonded Round Shank
AT-VMN95EBK Elliptical Stylus - Black
AT-VMN95EBK VM95 series Elliptical replacement stylus in black. Key Features: Aluminium cantilever Elliptical stylus Bonded Round Shank
AT6003R Cartridge Case - 3 sets of cartridges with headshells can be stored, Compatible with double pin lock headshells and Rubber feet for enhanced stability. Key Features: 3 sets of cartridges with headshells can be stored Compatible with double pin lock headshells Rubber feet for enhanced stability Slit capsules to fit the finger lift of the headshells
AT6011a Anti-Static Record Brush
AT6011a Anti-Static Record Brush. Key Features: Removes harmful dust and contaminants from your vinyl records. Conductive synthetic fibres help to dissipate static. Increases the lifetime of your cartridge and improves your listening experience by reducing surface noise.
AT6012 Record Cleaning Kit. Key Features: Velvet brush pad reaches into grooves. Inner reservoir directs AT634 Record Care Solution into brush pad’s leading edge. Records and styli last longer.
AT6013a Dual-Action Anti-Static Record Brush
AT6013a Dual-Action Anti-Static Record Cleaner. Key Features: Anti-static brush fibres remain straight for deep vinyl groove cleaning. Increase the lifetime of your cartridge and improve your listening experience by reducing surface loss.
AT607b EU Stylus Cleaning Fluid
AT607b stylus cleaning fluid - 12ml volume. The AT607 stylus cleaning fluid extends both stylus and record life. The special cleaning formula dissolves dust and dirt known to hinder proper tracking. An applicator brush is attached to the cap for ease of use. Key Features: Remove dust from stylus Contains quick-drying fluid Easy to use brush on the back side of the cap
AT6108 Cartridge To Headshell Lead Wires
AT6108 Cartridge To Headshell Leadwires. Key Features: 6N-OFC 99.99997% high-purity oxygen-free copper 0.12mm x 29 core strand construction Damping material used in wire sheath (titanium compounded sheath)
AT615a Turntable Bubble Leveller
AT615a Turntable Bubble Leveller. Key Features: Precise level for horizontal adjustment of turntable Machined aluminium housing Fits all Audio-Technica Turntables
AT617a Cartridge Stylus Cleaner
AT617a Cartridge Stylus Cleaner. Key Features: Specially formulated polyurethane gel removes dirt particles from stylus Gel remains tacky for years Surface is washable for repeated use
AT6180a Stroboscopic Disc. Key Features: (50 Hz / 60 Hz) 33 - 45 rpm Close fit for accuracy Spindle radius guide
AT634a Record care solution. Key Features: Prolongs record and stylus life Simple application Two ounces - 56ml
AT81CP P Mount Moving Magnet Cartridge
P-mount Dual Moving Magnet cartridge with conical bonded stylus. AT81CP P-mount Dual Moving Magnet cartridge with conical bonded stylus. 0.6 mil conical stylus, Bonded round shank diamond and Carbon Fibre Reinforced ABS cantilever.
AT85EP P Mount Moving Magnet Cartridge
P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. AT85EP P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. 0.3 x 0.7 mil elliptical stylus, Aluminium Pipe Cantilever and Elliptical bonded diamond stylus.
The ATN3600L conical bonded stylus has been updated with a modern design and will be re-released as the ATN3600LC. It retains the same ease of use, quality, and sound performance, with a stylus that ensures proper contact even if the cartridge is slightly tilted. Compatible with the AT3600L, it offers a seamless cartridge replacement. The ATN3600LC styli is compatible with the following cartridges: AT3600AT3600LAT3601AT3651AT3650LAT3650CAT3650AT3626
Introducing the ATN3600LE stylus: Upgrade your AT-LP60X series turntable with this elliptical bonded stylus, enhancing sound quality over the ATN3600L conical stylus. Modelled after the trusted ATN3600L, the ATN3600LE features a 0.3 x 0.7 elliptical stylus, combining reliability with improved audio performance. The ATN3600LE styli is compatible with the following Audio-Technica Turntables: AT-LP60X seriesAT-LP60 series AT-SB727and AT-SB2022
Replacement stylus for AT81CP cartridge. Conical Stylus Bonded Round Shank Construction Tracking force: 1.0 to 1.5 g (1.25 g standard) Please Note: The ATN81CP has replaced the AT3472P stylus.
Replacement stylus for AT85EP cartridge: AT85EP Elliptical bonded stylus Tracking force: 1.0 to 1.5 g (1.25 g standard)
Replacement stylus for AT91 cartridge. The ATN91 is a compatible stylus for CN5625AL and AT90 discontinued cartridges.
Replacement stylus for AT95E cartridge. The ATN95E is also compatible with discontinued models AT93 and AT95.
ATN95EX Replacement stylus for AT95EX. Elliptical diamond stylus with Bonded Round Shank, Replacement stylus for AT95EX in red.
Please Note: This listing is for a pack of 4. Michell's 4mm banana plugs are milled from brass and then gold plated. They are also colour coded.
Basic Level Gauge For Turntable Set Up
A lightweight budget version of the high precision gauge.
Brush-IT Carbon Fibre Record Cleaning Brush
Every vinyl lovers essential piece of kit; a brush specially designed to keep your precious vinyl in optimum playing condition; free of atmospheric and residue blemishes (unfortunately there is no total cure for scratches). Simply run this brush around your record to clean the groove out before playing.
Brush-IT Premium Fibre Record Cleaning Brush
For all vinyl lovers out there, the Brush it Premium is an essential accessory to ensure a flawless playing experience. This product features fine carbon-fibre bristles that effectively remove even the smallest dust particles from your records. Additionally, an Earthing wire is attached to reduce electrostatic charging. With Brush it Premium, you can quickly and easily clean your vinyl before each play and enjoy clear music without any noise disturbance. The grounding cable included with the product can be attached to any Earth point within your system, keeping your vinyl records static-free and ensuring clear music playback without any interference.
Carbon Moving Magnet Cartridge
The Rega Carbon is a high quality, moving magnet pick-up cartridge designed to be simple to set up, easy to install and above all, accurately reproduce music. Supplied as standard on the multi-award-winning Planar 1 and Planar 2 turntables, the Carbon performs far beyond its entry level price tag. Key Features: Carbon cantilever Conical profile Detachable stylus Tracking pressure 2-3 g Output 2.5 mV at 1 kHz Lifetime warranty against manufacture defects The Rega Carbon delivers a punchy performance with tight bass and balanced tonal control. Its wide tracking pressure range makes it a highly tolerant cartridge that is is easy to set-up and simple to use. It features a convenient removable stylus for simple and easy replacement. Technical Specifications: Output: 2.5 mV @ 1 kHz Stylus: User replaceable Fixing: Standard, two screws Cantilever: Carbon Colour: Black / White Tracking Pressure: 2-3 g
Please Note: This is for the STYLUS ONLY not the complete cartridge. Give your Rega Carbon cartridge an immediate, noticeable lift in performance with the Carbon Pro stylus. This is a simple, direct replacement and a significant upgrade over the standard stylus. The secret is the new Elliptical bonded stylus, which replaces the standard Carbon's conical profile. The result? You'll experience an instant boost in dynamics and detail from your records. Installation is literally a matter of seconds—no need to even remove the cartridge from the tonearm. It’s the perfect, affordable performance boost for all Planar 1, Planar 1 Plus, and Planar 2 owners using the standard Rega Carbon.
Replacement stylus for the Rega Carbon MM cartridge. PLEASE NOTE: This is for the STYLUS ONLY not the complete cartridge.
Cartridge Alignment Protractor
The Ortofon Cartridge Protractor is a simple yet sophisticated tool that allows you to properly align your cartridge for optimum performance throughout the length of a record. This useful device is ideal for anyone who is looking to change their cartridge or fit a new model for the first time. For best results aim to align the cartridge's cantilever with the alignment protractor.
Cartridge Alignment Protractor
Tonar 4208.This cartridge alignment protector allows the proper setting of the cartridge offset and overhang.
High quality nut and bolt kit for fitting and aligning Roksan cartridges.
Michell think that these are the ultimate cartridge tags and they come as standard on their TecnoArm 2.
The TIP SAVER protects your valuable sensitive cartridge from accidental damage during storage, transport… and domestic cleaning! Suitable for our models: DDT - II SpecialMC - TWO SpecialMC - 10 SpecialMC - One SpecialMC - One Super SpecialThe FrogThe Frog GoldThe Frog HO
CC 1.0 Cartridge Tags (Set Of 4)
Gold plated headshell wire connecting clip for cartridges with 1.0 mm. connecting pins (the standard dimension).
CC 1.2 Cartridge Tags (Set Of 4)
Gold plated headshell wire connecting clip for cartridges with 1.2 mm. connecting pins (the standard dimension).
This brush is made of ultra-fine pole very high quality velvet, specially selected for this purpose. The velvet reaches deep into the record grooves and removes even the finest dust particles. The brush itself can be easily cleaned using the two foam rubber scrapers located on both sides of the plastic brush base.
Clean Tip Carbon Fibre Stylus Cleaner
The Tonar Clean Tip is a premium carbon fibre stylus cleaning brush.
Clean-IT Carbon Fibre Stylus Brush
The Clean-IT is a Carbon Fibre Stylus Brush that is a simple but effective device that can help prolong the life of your precious cartridge and vinyl records. By using this brush, you can remove most dirt and deposits from the stylus tip, which stops the cartridge mis-reading the groove of the record wall, causing a sub-par performance. Continual cartridge and record maintenance is key to good audio performance.
Cork 'N Rubber Turntable Mat
Mats matter - During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound “muddy”. So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.
Cork & Rubber-IT Turntable Mat
Isolating the critical parts of your turntable is vitally important when trying to achieve true audiophile quality vinyl playback. A key step in this, which is often overlooked, is isolating the actual vinyl record from the turntable platter. Quality cartridges are extremely sensitive, and can easily detect interactions between your record and an imperfect platter surface. Key Features: Upgrade platter mat with improved sound characteristics Ideal replacement for felt mats Well-suited to metal platters, thanks to its enhanced damping properties Improves timing of audio performance Avoids static build up often associated with felt mats
Non-static platter mat consisting of fine granules (cork). Made to effectively suppress the typical resonance generated in vinyl records during playback as well as to provide a silent foundation.
This is a Cork mat designed to fit all Pro-Ject series turntables, except Debut II and III models (the Debut Carbon and Debut S/E 3 are compatible). The use of Cork gives the mat special sonic qualities, well-suited to certain deck/cartridge combinations, and also different room-types. A very cost effective way to improve the sound and have less noise by static and dust.
The VPI Crosscheck Turntable Level is an effective and easy to use level. The crosscheck level allows two axes to be checked simultaneously, making levelling a quick and simple task. The small form factor allows quick measurements to be taken anywhere.
Replacement drive belt for Nottingham Analogue DAIS, this is for the original Dais Turntable only.
All audio components can be sensitive to mechanical vibrations which can hinder performance. Pro-Ject's Damp-IT feet are a great solution to remove any unwanted vibration and aid in delivering optimal sound. Designed to work with speakers, CD players and tube amplifiers as well as other components that maybe sensitive to vibrations or positioned on glass, metal or thin wood platforms. Key Features: Special absorber feet for effective decoupling Made from hightech TPE (thermoplastic elastomers) Prevents transmission of mechanical vibration Optimised to absorb frequencies from 20-500 Hz Especially for bookshelf speakers, Disc players, turntables, tube amplifiers and more Extremely cost-effective sound upgrade! Available in pack of 4
Drive Belts are used on all Pro-Ject turntables as the method by which the turntable platter rotates. In many cases the belt turns a sub-platter, which sits underneath the main platter - like with the multi-award winning Debut record player. However, there are also other turntables that use a belt which reaches around the perimeter of the main platter itself - avoiding the need for a sub-platter. All Pro-Ject drive belts are made of the highest quality materials, and are optimised to work with certain turntables from the Pro-Ject range.
Double Matrix Professional Microfibre Strip Set
Set of 4 replacement adhesive microfibre strips for the Double Matrix Professional cleaning machine.
Double Smart Matrix Microfibre Strip Set
Set of 4 replacement adhesive microfibre strips for the Double Smart Matrix record cleaning machine.
Please Note: This is for all Michell turntable models except the Reference Hydraulic. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.
Drive Belt for ASP 138 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 1254 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 1256 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 1257 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 1268 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 130 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 2110 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 2115 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 2120 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 2125 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 2210 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 2215 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 410 New Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 415 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 415-1 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 415-2 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 420 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 430 New Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 431 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 435 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 440 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 450 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 455 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 455-1 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 458 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 460 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 465 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 503-1 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 503-2 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 505 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 505-1 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 505-2 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 505-3 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 505-4 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 506-1 (not CS 506) Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 508 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 511 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 514 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 515 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 520 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 522 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 525 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 528 Turntable
Dimensions: (diameter 112.0mm) x 0.60 x 5.00 mm Original Dual Service Part suitable for following models: CS130, CS505, CS505-1, CS505-2, CS505-3, CS505-4, CS506-1 (not CS506!), CS508, CS522, CS528, CS1254, CS1256, CS1257, CS1268
Drive Belt for CS 530 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 540 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for CS 545 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for SP 120 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Drive Belt for SP 85 Turntable
Dimensions: (diameter 176.0mm) x 0.60 x 4.00 mm Original Dual Service Part suitable for following models: S461, CS481, CS502, CS504, CS506 (not CS506-1!), CS510, CS521, CS601, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Nottingham Analogue Drive Belt Standard fits all models except Space 294 & Deco
Dustaway Carbon Fibre & Velvet Record Brush
This state-of-the-art DJ record cleaning brush combines the properties of the Tonar Classic and the Nostatic into one brush. The centre part of the brush is made of ultra-fine pole high quality velvet. This velvet is flanked on both sides by a thick layer of very fine carbon fibres. The carbon fibres remove the static from the record so the dust lays loose and can be easily picked up by the velvet in the middle of the brush even from deep in the record grooves.
Please Note: Essential Drive Belt (Part Code: 1940 675 222 and/or 1940 675 302) Drive Belts are used on all Pro-Ject turntables as the method by which the turntable platter rotates. In many cases the belt turns a sub-platter, which sits underneath the main platter - like with the multi-award winning Debut record player. However, there are also other turntables that use a belt which reaches around the perimeter of the main platter itself - avoiding the need for a sub-platter. All Pro-Ject drive belts are made of the highest quality materials, and are optimised to work with certain turntables from the Pro-Ject range.
Most records are positively charged with static electricity. This positive charge attracts dust and grime to the disc groove, resulting in clicks, crackle and unwanted surface noises and also accelerates deterioration of the stylus. These sleeves safely protect the disc inside the outer sleeve, reducing the positive charge, thereby releasing the dust.
Non-static platter mat consisting of felt. Made to effectively suppress the typical resonance generated in vinyl records during playback as well as to provide a silent foundation.
The use of a felt mat helps ensure a smooth interface between your vinyl record and the turntable platter. As well as offering protection, Pro-Ject felt mats are designed to resist slip, so the audio performance does not suffer in use. On top of felt mats, Pro-Ject Audio Systems also make a cork mat and a leather mat, which offer an upgraded performance compared to the felt designs. The Standard 12" Felt Mat is for use with: Elemental Essential Essential II Genie (all varieties) RPM 1 Carbon Debut S/E3 Debut Carbon Xpression Xpression II Xpression Carbon UKX Pro-Ject 1.2 (all varieties) Pro-Ject 2 (all varieties) Pro-Ject 2.9 Pro-Ject 6.9
VPI's black slipmat.
A metal finger lift to both serve as a washer for your cartridge and area to grab and cue your tonearm onto your record.
Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300.
Fluid Concentrate For Record Cleaning Machine (3 x 50ml bottles)
Okki Nokki's proprietary formula brings dirt to the surface for easy removal. 50ml of concentrate makes 1L of cleaning fluid when added to distilled water.Please Note: This price is for three bottles.
Grease-IT Inverted Bearing Lubricating Grease
A turntable is a delicate thing and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time, this is caused by many factors, such as climate and humidity. Key Features: Lubricating grease for inverted bearing systems Keeps your turntable platter spinning smoothly Supplied as a pre-filled syringe
Replacement GS standard PSU
The High Power-IT 2 is a three pin power supply with a ground connection for Pro-Ject turntables. It gets rid of ground related hum problems, especially occurring with amplifiers that have no real ground connection. Key Features: 3 pin DC with ground connection Proper grounding for your turntable Dramatically reduces grounding hum Solution for floating mass systems Delivers cleaner current & power Compatible with 15V DC Pro-Ject turntables If a turntable is not properly grounded, it may have a different ground reference to the connected amplifier. Consequently, these potential differences induce a compensating current which can be heard as a hum. Many modern amps, especially those used in sound bars and streaming speakers (but also found across a wide variety of hi-fi separates), have no ground connection and can therefore experience this problem. These systems are called, in technical terms, "floating mass systems". If a standard turntable is connected to such a "floating mass" amplifier, then and audible hum can be the result. Technical Specifications: Output: 15V DC, 1.5A Input: 100-240V AC, 1.1A, 47-63Hz Diameter DC Plug: 2.1 mm Dimensions: 92 x 45 x 32 mm Weight: 140g (Without Power Cord)
Hydraulic Reference Drive Belt
Please Note: This will only fit the Hydraulic Reference turntable. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.
50-Pack Anti-Static Record Sleeves - Protect your vinyl collection from dust, dirt, and static buildup. Specially treated with an anti-static finish, these premium sleeves allow your records to slide in and out smoothly, preventing scratches and ensuring a seamless, friction-free experience every time you play.
Upgraded headhsell cables for your SME headhsell. Pro-ject Lead it C headshell leads are made from high-purity copper, making it an ideal upgrade for enhancing the performance of your headhsell cabling. Copper is chosen for its exceptional conductivity and superior signal quality. The cable's cartridge tags feature advanced spring technology in the connectors, ensuring a secure and reliable connection to the cartridge pins for optimal signal transfer. Additionally, the use of gold-plated beryllium copper in the cartridge tags provides multiple benefits, including outstanding conductivity, enhanced signal integrity, and improved durability.
Upgraded headhsell cables for your SME headhsell. The Headhsell cable, crafted from high-purity silver, is the perfect upgrade to enhance the cabling of your headshell. Silver’s superior conductivity makes it the ideal choice for transmitting signals, and its interaction with impedance helps deliver a more accurate and faithful reproduction of the source material. Additionally, the cartridge tags are engineered with advanced spring technology in the connectors, ensuring a secure and stable connection to the cartridge pins for optimal signal transfer. The use of gold-plated beryllium copper in the cartridge tags further improves the cable's performance, offering exceptional conductivity, enhanced signal integrity, and increased durability.
Wooden spirit level for optimum positioning of a turntable.
By simply placing the Libelle on top of your turntable the Libelle can tell you how level your system is. From here it gives you the perfect indication of what part needs adjusting to give you a perfectly level turntable.
LP#9 Stylus Cleaner with Stylus Brush
A dirty stylus gets between you and your music. Mobile Fidelity LP#9, a revolutionary stylus cleaner and lubricant, is a simple, easy to use stylus cleaner which will improve the sound of your analogue system while extending the life of your phono cartridge.
Formerly known as Grease-IT, this platter bearing oil is a high-tech lubricant, allowing for drastically reduced friction around the main bearing. Now your turntable can spin at a constant velocity, improving its performance. All you need is a couple of drops, and the performance will be solid for years to come.
LX7 Turntable Main Bearing Oil Kit
This Turntable Main Bearing Oil Kit from Roksan ensures smooth running and pitch stability of your Roksan turntable platter.
Set of 5 replacement adhesive microfibre strips for the Matrix record cleaning machine.
Measure it DS Universal Stylus Tracking Gauge
Measure it DS is a lightweight precision tracking force gauge. It is designed to work with each and every possible cartridge and tonearm combination, independent of weight, shape or design. Other, cheaper scales can be quite unhandy and unnecessary difficult to use with certain cartridges. Especially as you go up a few levels, and reach heavier and bigger high-end pickups. Measure it DS makes your set-up life easier and is the perfect choice to be safe for the future. The scale comes factory calibrated for highly accurate tracking force measurements, and the non-magnetic scale surface is especially suitable for MC cartridges. Key Features: Pre-calibrated at factory for ultimate precision Scale design optimized to work with any cartridge and tonearm combination Non-magnetic scale surface especially important for MC cartridges Auto off after 60 seconds 2x AAA batteries included LCD screen with back lighting
Micro Hair Record Cleaning Brush
Okki Nokki micro hair record cleaning brush.
Two high quality micro fibre replacement pads for effective and easy cleaning.
ND-025 18V / 500mA DC Power Supply
The ND-025 is a Pro-Ject replacement power supply for the following products; DAC Box DS (Up to S/N D9268) Dock Box S Fi Head Box S Head Box S USB Head Box DS Phono Box Phono Box MM (From S/N E4360 onwards) Phono Box S Phono Box USB V Phono Box DS Phono Box DS+ Pre Box S Pre Box DS Pre Box RS (Up to S/N D16272) Speed Box S
ND-026 18V / 1A DC Power Supply
The ND-026 18V / 1A DC Power Supply is a Pro-Ject replacement power supply. Compatible with: CD Box DS DAC Box DS (From S/N D9269 onwards) Speed Box DS Stream Box DS+ Tube Box S Tube Box DS
ND-027 9V / 300mA DC Power Supply
The ND-027 is a Pro-Ject replacement power supply.
ND-028 9V / 2A DC Power Supply
The ND-028 is a Pro-Ject replacement power supply.
The Nostatic Arm is the modern version of the formerly well known “Dust Bug” by Cecil Watts. The Nostatic arm incorporates a carbon fibre brush that removes the static electricity from the record during playback, and at the same time picks up the loose dust before the stylus reaches that part of the record. The Nostatic arm has an earth wire which is connected to the earth of the record player or the amplifier. The height can be easily adjusted to fit most record players. It also has a sliding weight in order to adjust the “dusting force” of the brush. Finally the base of the brush has sticky tape so if preferred it can be stuck to the surface of the record player for easy use.
This brush contains more than one million very fine carbon fibre bristles. The cross section of these bristles is so small that they can easily get into all the nooks and crannies of the record groove. Because the carbon fibre conducts electricity it takes away all the static to earth via the metal handle and the person holding the brush. Then the dust lies loose in the groove so the next set of bristles can easily pick them up and remove them from the record groove.
Stainless Steel clamp holds records securely in-place during cleanings. Please Note: This clamp is designed to be used on the Okki Nokki One record cleaning machine only and is not suitable for turntables.
Perspective/Perspective II Drive Belt
Drive Belts are used on all Pro-Ject turntables as the method by which the turntable platter rotates. In many cases the belt turns a sub-platter, which sits underneath the main platter - like with the multi-award winning Debut record player. However, there are also other turntables that use a belt which reaches around the perimeter of the main platter itself - avoiding the need for a sub-platter. All Pro-Ject drive belts are made of the highest quality materials, and are optimised to work with certain turntables from the Pro-Ject range.
The Pro-Ject Pin It utilises a precise spring technology in the connector to provide secure fastening to the cartridge pins, ensuring improved transfer of signal from the cartridge. Furthermore, the use of gold-plated beryllium copper in the cartridge tags, offering several advantages including excellent conductivity, improved signal integrity, and improved durability.
Pitch Belt for CS 505 Turntable
Original dual spare part suitable for the following models:all versions of the CS 505, CS506-1, CS522
Pitch Belt for CS 506-1 Turntable
Original dual spare part suitable for the following models:all versions of the CS 505, CS506-1, CS522
Pitch Belt for CS 522 Turntable
Original dual spare part suitable for the following models:all versions of the CS 505, CS506-1, CS522
Planar 1&2/RP1/RP78 Turntable Mat
Rega's felt turntable mat.
Replacement drive belt for the Rega Planet turntable.
Plastic Goat's Hair Record Cleaning Brush
Goats hair cleaning brush for all wet cleaning products.
PLUS Enzyme Cleaner 32oz Bottle
High Performance Solution for use with Record Cleaning Machines. Removes organic materials embedded in your vinyl: No other product removes more contaminants, including oils, sweat, smoke, and mould. Please Note: To get the most out of PLUS, MoFi highly recommend using their PURE Record Rinse. PURE is ultra-pure water that has gone through four stages of deionization, after which it is triple-distilled and then treated with high-intensity ultraviolet light to kill all bacteria and microbiological particles. This intense and thorough process leaves nothing in PURE to harm your vinyl.
The Polarity Checker is an unique device that will come in handy when fine-tuning your audio installation to minimise its residual ground currents. It is also a voltage, phase and cable-interruption checker that can be use-full with all kinds of other electrical appliances around the house as it has both direct and inductance test modes. No batteries!
Premium Cartridge Alignment Tool
Ortofon's Premium Cartridge Alignment Tool is designed to offer a simple yet sophisticated solution for aligning your cartridge to achieve optimal performance while playing a record. This tool is 75% more rigid than the standard version and features high-visibility printing for better ease of use. To get the best results, aim to align the cartridge's cantilever with the alignment protractor.
Permaclean is a remarkable cleaning system that rapidly removes all contaminates from vinyl records, CDs and DVDs - from dust and grit to greasy fingerprints! Permaclean safely and quickly removes the unwanted grime that causes serious background noise. Your records and discs are restored to virtual mint condition after the Permaclean treatment. When used in conjunction with Permostat it proves a most effective record/disc restorative. The Permaclean Kit includes the unique double sided Duopad and will treat approximately 40 records.
PS1 Replacement Power Supply (350mA)
Replacement power supply for Rega's Ear, Fono, TT PSU, PL1 plus turntables.
PS2 Replacement Power Supply (100mA)
Replacement power supply for Rega's RP3, Fono Mini A2D and PL1, PL2, Planar 3 turntables.
The pulley is a precision-engineered component aimed at taking the rotating force of the motor and transferring it to the sub-platter or platter of the turntable - making the record spin at either 33 1/3 or 45 RPM. Almost all replaceable Pro-Ject pulleys are secured in place with a small grub screw, for fixing to the motor shaft - others need to be glued into place.
Mats matter - During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound “muddy”. So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.
Pure Groove Essence Record Cleaning Fluid
A very efficient and professional record cleaning fluid, with enormous cleaning power, suitable for all record cleaning machines. Please Note: Essence to be mixed with Ethanol (92%) before use. (Ethanol not provided.)
Mobile Fidelity Sound Lab PURE Record Rinse consists of the purest water you can find for cleaning vinyl LPs. Ultra-high-purity PURE is also used as the base of Mobile Fidelity Sound Lab's other record-cleaning fluids and is perfect for use as the final rinse step before putting LPs back into their sleeves. Of course, you should never rinse your records with tap water. It contains trace minerals, chemicals, and microscopic organic matter that can be deposited in freshly cleaned grooves. Bottled water comes from either the same sources as tap water or from natural springs that have an even larger amount of minerals. Distilled water that has been distilled once or twice can even still have contaminants. That is why Mobile Fidelity Sound Lab PURE Record Rinse is your best option. PURE has gone through four stages of deionization, after which it is triple-distilled and then treated with high-intensity ultraviolet light to kill all bacteria and microbiological particles. This leaves nothing in PURE to damage your vinyl.
Rachel Sermanni 'Under Mountains' (2LP 180g Vinyl)
Rachel Sermanni - Under Mountains on 2x45rpm 180gm Vinyl. Released via Turntableworld Records on Monday 3rd February 2014.Includes exclusive bonus track, 'Circus Song'.
RB110 Mild Steel Counterweight
Replacement counterweight for the RB110 tonearm. Please Note: The RB110 tonearm comes as standard on the following turntables. Planar 1 Planar 1 Plus This counterweight is also compatible with the RB101 tonearm.
RB220 Mild Steel Counterweight
Replacement counterweight for the RB220 tonearm. Please Note: The RB220 tonearm comes as standard on the following turntables. Planar 78 Planar 2 This counterweight is also compatible with the RB202 tonearm.
RB330 Mild Steel Counterweight
Replacement counterweight for the RB330 tonearm. Please Note: The RB330 tonearm comes as standard on the following turntables. Planar 3 - Mild Steel Planar 6 - Stainless Steel This counterweight is also compatible with the RB303 tonearm.
RB330 Stainless Steel Counterweight
Replacement counterweight for the RB330 tonearm. Please Note: The RB330 tonearm comes as standard on the following turntables. Planar 3 - Mild Steel Planar 6 - Stainless Steel This counterweight is also compatible with the RB303 tonearm.
RB880 Stainless Steel Counterweight
Replacement counterweight for the RB880 tonearm. Please Note: The RB880 tonearm comes as standard on the following turntables. Planar 8 This counterweight is also compatible with the RB808, RB330 and RB303 tonearms.
Cleaning your records before every use increases the lifetime of the diamond and improves your listening experience. Key Features: Features two rows of tightly bound carbon fiber bristles Easy to use Lanyard hole for convenience and store
This record clamp uses a screw-thread on the spindle of a compliant turntable to fasten itself, and solidly hold the playing vinyl in place. The use of a clamp allows for a great reduction in any resonance or 'slip' associated with an ill-fitting record. Clamps are often preferred to pucks, as they use less weight to achieve the same goal.
Record Clamp - Customer Return
Please Note: This listing is for a customer return meaning that the product has been opened and used and maybe some small cosmetic imperfections. This record clamp uses a screw-thread on the spindle of a compliant turntable to fasten itself, and solidly hold the playing vinyl in place. The use of a clamp allows for a great reduction in any resonance or 'slip' associated with an ill-fitting record. Clamps are often preferred to pucks, as they use less weight to achieve the same goal.
The best brush available for wet or dry cleaning: Indispensable for LP care, keeps vinyl clean, quiet and valuable. Please Note: The MoFi Brush should be rinsed thoroughly before first use as it's possible that some fibres from the pad cutting process may still be on the surface of the brush. A simple rinse with pure water will remove any potential fibres on the surface. One cleaning pad will clean hundreds of your favourite LPs.
Record Cleaning Brush And Pack Of Replacement Pads
Here's an inexpensive tool for keeping all of your irreplaceable records clean and cared for. We are very proud to offer the latest in essential record care products: The Mobile Fidelity LP Record Brush. Easy to use, easy to clean, this record brush is guaranteed to keep all of your LPs clean and quiet. It gets really deep into the grooves and helps scrub all that nasty, noisy dirt out. The key to its great vinyl cleaning is found in Mobile Fidelity's proprietary cleaning pad and ergonomic brush handle. It's been designed for multi-purpose use: it can be used as a wet-cleaning brush (we recommend using it as part of your intensive record cleaning machine workout) or as simply the best dry record brush ever designed. One cleaning pad will clean hundreds of your favorite LPs. For cleaning: We recommend keeping an unused toothbrush around for cleaning the pads on the Mobile Fidelity LP Brush. Remember...a clean brush is a happy brush...and one that will not transfer debris onto other records. Mobile Fidelity 2 Replacement Pads for Record Cleaning Brush Suitable for The new Mobile Fidelity LP Brush and it's the best brush currently available. We offer a set of two replacement cleaning pads, simple to put on the brush after you have cleaned about 100-150 records.
Please Note: This puck is not compatible with the Acryl-IT E platter and is only compatible with turntables who's spindle height does not exceed 10.55mm, be sure to check this before any purchase. This aluminium record puck ensures a secure fit between record and turntable by means of weight. With the two different finishes, black and silver, it perfectly fits the design of almost any turntable, making it a great addition to any hi-fi set-up. Key Features: Ensures a firm fit of the record Reduces unwanted vibrations Optimises playback of warped records Felt mat on the underside to protect the label Sound improvement for all turntables
Record Stabilising Clamp with Spirit Level
An audiophile class record stabilizing clamp with precision level eliminates vibrations and ensures the turntable is level. The clamp presses the record firmly flat against the platter reducing distortion and provides an overall improvement in sound.
Reference EBLT Upgrade Drive Belt
Custom made premium Reference EBLT drive belt. Fitted as standard to all Planar 8 and Planar 10 turntable models from March 8th 2021. The Rega Reference EBLT drive belt is the culmination of many years of R&D and advanced tooling trials. The most accurate drive belt they have ever produced, the Reference EBLT is now fitted as standard to all Planar 8 and Planar 10 turntable models as standard. The Reference belt is suitable for all Rega turntables but highly recommended for the Planar 6 and any Planar 3 using the Rega Neo TT PSU. Each belt is moulded on Rega's highly accurate custom tooling using a unique secret blend. Once moulded, the belts are cryogenically frozen and barrelled to remove any excess flash in order to create perfect cross sectional roundness which is critical for accurate speed and stability. In normal use and conditions, the lifespan of the EBLT drive belt is 50% longer than the previous model. All Reference belts go through a unique curing process which guarantees the highest achievable level of accuracy. Technical Specifications: Rega Drive Belt: Reference EBLT monomer Diameter / cross sectional roundness: Improved stability / Speed accuracy Lifespan: 50% longer lifespan than a polychloroprene belt Advanced curing process: Improved consistency in modulus of material
One of the key elements of the Spin Clean Record Washer System MK II; these unique, purpose-built brushes apply the perfect amount of pressure to clean your records thoroughly. These replacement brushes for the Spin Clean Mk II Washer System are sold as a pair; so you can re-new the effectiveness of your Washer System in one simple purchase.
Easy-to-use lint-free washable record-cleaning cloths. These cloths can be washed and re-washed in a washing machine with whites and bleach. Use one for cleaning and another for drying the record surface during each session with the Record Washer System. Fluffy soft, non-abrasive, and 100% cotton; these one-of-a-kind drying cloths add the perfect finish to your “like-new” LPs and 45s. These replacement drying cloths for the Spin Clean Mk II Washer System are sold in a pack of five.
The purpose of a counterweight is to apply the optimum down force for your pick-up cartridge to read the most amount of detail within the record groove.
Replacement Drive Belt for TD-124 Turntable
Original Thorens replacement belt made of a special rubber compound.
Replacement Drive Belt for TD-180 Turntable
Original Thorens replacement belt made of a special rubber compound.
Replacement Drive Belt for TD-280 MKIV Turntable
Original Thorens replacement belt made of a special rubber compound.
Replacement Pads for Record Cleaning Brush
Quickly and easily replace worn-out mobile fidelity sound lab brush pads: Replace pads after cleaning 100-150 vinyl records. Please Note: This package consists of two replacement cleaning pads.
Replacement Velvet Strip Set (2 Pieces)
Set of two replacement velvet strips for cleaning machine vacuum arm. These ensure a tight vacuum seal for maximum dirt removal. Velvet strips on RCM vacuum tubes should be replaced approximately every 200-250 LPs. Even though the strips look fine, the performance of the machine has slowly degraded. The velvet crushes down and hardens if not dried after a cleaning session. Applying new velvet strips returns the unit to its original performance.
Replacement Water Spout For VC-S Record Cleaning Machine
Replacement Spout for the Pro-Ject VC-S. This removable spout is used for when emptying the VC-S's water tank.
Original replacement part for Rega RP3, Hub bearing assembly kit for a worn hub or bearing.
Replacement felt mat for Rega RP3, 6 and 8 turntables.
Drive Belts are used on all Pro-Ject turntables as the method by which the turntable platter rotates. In many cases the belt turns a sub-platter, which sits underneath the main platter - like with the multi-award winning Debut record player. However, there are also other turntables that use a belt which reaches around the perimeter of the main platter itself - avoiding the need for a sub-platter. All Pro-Ject drive belts are made of the highest quality materials, and are optimised to work with certain turntables from the Pro-Ject range.
RPM10 Carbon/Signature 10 Drive Belt
Drive Belts are used on all Pro-Ject turntables as the method by which the turntable platter rotates. In many cases the belt turns a sub-platter, which sits underneath the main platter - like with the multi-award winning Debut record player. However, there are also other turntables that use a belt which reaches around the perimeter of the main platter itself - avoiding the need for a sub-platter. All Pro-Ject drive belts are made of the highest quality materials, and are optimised to work with certain turntables from the Pro-Ject range. To extend the life of your drive belt, avoid touching it with your hands as much as possible. Once mounted, use the Speed Key provided with Pro-Ject turntables to change the rung of the pulley. This drive belt can be used on the following turntables: RPM 10 Carbon Signature 10
The 78RPM pulley has been designed for Pro-Ject turntables which can rotate at 78RPM when combined with the Pro-Ject Speedbox.
This is a basic tool for the measuring of cartridge tracking force weight and alignment. Setting up the tracking force of a pre-installed cartridge on a Pro-Ject deck is a very simple process. Simply place the stylus tip on the desired weight, then move the tonearm counterweight forward and backward on the back of the tonearm until the protractor is level (it is pivoted like a see-saw in the middle). Key Features: Simple yet effective turntable tool Measures tracking force and cartridge alignment Supplied with a range of Pro-Ject turntables
These Shim Kits are used to raise the main bearing housing on an original Xerxes turntable. Order the 1 mm or 2 mm version dependant on how much the the bearing housing needs raising.
For refilling the well on the Hydraulic Reference and Transcripitors turntables and for fluid damped tonearms such as SME V etc.
Single Point Tonearm 2mm VTA Spacer
Arm Height Adjustment spacer for RB250 and RB300 - size 2mm. When Rega arms are fitted to turntables from other manufacturers it may be necessary to add Rega arm spacers to achieve the correct arm height. Circular spacers are available for the RB250 and RB300 in thickness' of 2mm. An arm 'Sleeve nut' is also available for circumstances where the arm base does not protrude below the arm mounting board. Please Note: Turntable spacers are not necessary on all Rega turntables.
Smart Matrix Microfibre Strip Set
Set of 2 replacement adhesive microfibre strips for the Smart Matrix record cleaning machine.
A smart and effective spirit level designed to help turntable levelling during set up. This new model can be used on Roksan's Nima and Sara arms to adjust azimuth.
Small accurate spirit level by dutch high end cable, phono cartridge manufacture Van Den Hul intended for tonearm and platter levelling purpose. Dimensions: H/W/D: 16/9/12.7 mm
Original Thorens replacement belt made of a special rubber compound.
50Hz strobe disc for use with incandescent light (not supplied).
60Hz strobe disc for use with a 60hz light (not supplied).
The useful and innovative combination of a stroboscope - AKA, a speed-checker for your turntable - and a cartridge alignment tool. An essential accessory for any turntable enthusiast.
Replacement stylus, recommended for the following cartridge models: OM 5S Key Features: Replacement stylus for the Ortofon OM 5S Optimised sound reproduction Spherical stylus profile Hi-Fi sound at an affordable price
Dynavector's Stylus Brush is suitable for everyday use and ensures your stylus stays clean.
Clean your stylus, protect your analogue investment, extend your stylus life, and hear better-sounding vinyl records. Please Note: Always brush from the back to the front of the stylus. Start behind the stylus and delicately pull forward. Try to only touch the stylus and not the cantilever.
Anti-static liquid for gentle cleaning of styli and stylus assemblies. With two different applicators.
Manual stylus gauge for simple and accurate adjustment of the tracking force.
Super Deep Cleaner 16oz Bottle
Mobile Fidelity Sound Lab Super Deep Cleaner is made to clean very soiled LPs and also functions as a pre-cleaner for extra dirty records. Super Deep Cleaner can even be used for removing pressing debris and "mold release compound" from new LPs. It's much more powerful than Super Record Wash and should be used as the first step in your cleaning process. As always, Mobile Fidelity Sound Lab Super Deep Cleaner is made with an exclusive quad-distilled, hyper-pure water base with a mild detergent that leaves no residue and does not damage the surface of your records.
Keep your vinyl LPs in pristine condition: The best one-step record-cleaning fluid made for record cleaning machines and manual systems.
Synthetic Turntable Bearing Oil
Michell use a proprietary synthetic oil to lubricate the main bearing in all their turntables. The oil has to be a precise viscosity to enable the inverted bearings to circulate the oil correctly.
A 36 gauge, 7 strand extremely flexible interconnect wire, available in 4 colours: transparent, blue, red and green. Each of the strands is made of a very high grade of Matched Crystal (MC) OFC with a dense and very pure silver coating. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
Three Point Tonearm 2mm VTA Spacer
A 2mm stainless spacer, laser cut from 2mm stainless steel or anodised black aluminium. Fits all Rega three point tonearms including the 2016 range of Planar turntables. This spacer replaces the previous plastic spacer and offers better performance and support for the tonearm. Please Note: Rega turntables spacers should not be necessary unless you are you using an exceptionally deep bodied cartridge from another manufacturer.
Three Point Tonearm Plastic VTA Spacer
All in one 2mm, 4mm, 6mm and 8mm height adjustment spacer for Rega three point tonearms. When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our "Rega arm spacers" to achieve the correct arm height.
For setting up and checking the optimum position of the tonearm on your turntable.
The Ortofon tracking force gauge is a simple budget tool for turntables that is used to determine the stylus tracking force. The tracking force is the downward pressure that is applied by the weight of the tonearm through the cartridge stylus and onto the vinyl record. It is important to set the proper tracking force in order to maximize the playback performance and to reduce the risk of mistracking or causing excessive record wear. Check for the manufacturers recommended settings for your stylus tracking force. The Ortofon tracking force gauge tool is a small plastic pivot type scale that will accurately measure tracking force between 1.25g and 4g.
Replacement brush for the Pro-Ject VC-S. This brush is made from strands of goat hair, and helps to spread the Wash-IT solution evenly across the record without getting absorbed into the bristles. Please Note: For use on the VC-S, VC-S MK2, VC-S2 and VC-E.
VC-S Self Adhesive Strips for 7" Kit - Grey
Replacement self-adhesive strip for the Pro-Ject VC-S vacuum arm. This strip serves as a soft buffer between the metal vacuum arm and your vinyl records, and should be replaced regularly to ensure record protection. This is designed for the VC-S MK II, but compatible with all models (thicker).
VC-S Self-Adhesive Strip - Black
Replacement self adhesive strips for the Pro-Ject VC-S vacuum arm. These strips create a soft buffer between the metal vacuum arm and the vinyl record. These strips should be replaced at regular intervals, in order to protect your records. Please Note Available options: VC-S3, VC-S2 ALU or VC-E VC-S & VC-S MK II (End Caps included)
VC-S Self-Adhesive Strip - Grey
Replacement self adhesive strip (quanity of one single strip, as you no longer need two due to design changes) for the Pro-Ject VC-S vacuum arm. This strip creates a soft buffer between the metal vacuum arm and the vinyl record. This strip should be replaced at regular intervals, in order to protect your records. The Grey Strip - for VC-S MK II, but compatible with all models (thicker)
Okki Nokki felt record cleaning brush.
Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.
The VTA-IT is a 1.5mm tonearm spacer, allowing you to increase the vertical tracking angle of your turntables tonearm. With VTA-IT you will be able to install a larger variety of cartridge types on your tonearm or headshell. Please Note: The installation of “VTA-IT“ should be done by an experienced technician. Compatibility: Debut I-III Debut Carbon Debut Carbon EVO Essential I-III (only standard configurations) Required Tools: Philips #1 Screwdriver & 5.5mm Nut Driver Wrench
Wash-IT 2 Record Cleaning Fluid
The next generation Wash it 2 cleaning formula was developed exclusively by Pro-Ject Audio Systems for use with the VC-S and VC-E series record cleaning machine models. Key Features: NEW ready-to-use mixture NEW demineralised water mixed with cleaning concentrate in optimum ratio NEW ensures maximum lifetime of vacuum motors NEW optimised cleaning fluid for Pro-Ject vacuum cleaners Suitable for vinyl & shellac records Outstanding cleaning performance Dissolves a wide range of impurities including fat & grease Evaporates quickly and leaves zero residues Optimum application temperature 20-40 °C Optimum storage temperature 10-25 °C Eco-friendly - Non-toxic - Non-flammable - Alcohol-free Available in 250, 500 and 1000 ml bottles
Replacement washer fluid for the Spin Clean Record Washing System MK III. This cleaning fluid is a unique formula that lifts dirt and keeps your records safe and sparkling. Replacement bottles are available in 16oz. and 32oz. containers, making them a great and lasting investment. 16oz. bottle of fluid is enough to clean up to 2800 records. 32oz. bottle of fluid is enough to clean up to 5600 records. Please Note: The fluid used in the Record Washer System does not contain alcohol, so it is fine to be used with 78RPM records.
White Turntable Mat for PL10/RP1
Replacement White Turntable Mat for Rega PL10/RP1