Compare
Limit Reached
The Oriole upholds the refined, fatigue-free tonal balance that has made Sumiko a global benchmark. By integrating a low-impedance generator with a nude Shibata line-contact stylus, the Oriole represents a significant evolution from the Songbird, rivaling the legendary performance of the Starling.
It delivers impeccable tracking and an emotionally charged dynamic range, characterised by lightning-fast transients and a sophisticated, "sweet" resolution. Wholly analog in nature, the Oriole renders music with a natural sense of ambiance and cohesion. Operating with near-silent groove noise, it allows music to emerge from a stark, "black" background, inviting the listener into an expansive and intimate soundstage.
Key Features:
- Low Output Moving Coil
- Nude Shibata Natural Diamond Stylus
- Output (3.54cm/sec @ 1kHz): 0.3mV
- Cartridge Mass: 7.3g
SUMIORIOLE1A Specifications
Cartridge Specifications
| Output Voltage | (3.54cm/sec @ 1kHz): 0.3mV |
|---|---|
| Cantilever Material | Hollow, Reinforced Al. (Ø0.5mm) |
| Channel Separation (@ 1000Hz) | 30dB |
| Frequency Response (20 - 20,000Hz) | 12Hz - 45KHz |
| Tracking Ability (@ 315Hz at Recommended Tracking Force) | 70μm |
| Compliance, Dynamic, Lateral | (100Hz): 12x10-6cm/dyne |
| Stylus Type | Nude Shibata (6.5μm x 40μm) |
| Coil Wire | High-Purity Copper |
| Channel balance at 1kHz | 0.5dB |
| Tracking Force Range | 1.8 - 2.2g (2.0g) |
| Internal Impedance | (1kHz): 5.5Ω |
| Cartridge Weight | 7.3g |
£1,499.00
This kit includes the low noise, low vibration 24v motor designed and developed for Rega's range of multi award winning 24v turntables.
Designed with a simple fixing solution to fit all previous Rega turntables that do not already use 24v technology.
XACS-24VUPGMOT-UK
£155.00
Twin pack consisting of:
- Finger Locking nut (to suit Rega arms)
- A Vertical Tracking Angle adjustment sleeve for the Rega RB-250, RB-300 and RB-600 arms, to be used with the new-style Rega arm board Michell have been making since the beginning of 1999.
If used with other turntable brands, slight enlargement of the original Rega mounting hole will be necessary to accommodate the increased diameter of the VTA sleeve.
A013PACK
£50.00